Struct petgraph::graph_impl::Graph

pub struct Graph<N, E, Ty = Directed, Ix = DefaultIx> {
    nodes: Vec<Node<N, Ix>>,
    edges: Vec<Edge<E, Ix>>,
    ty: PhantomData<Ty>,
}

Graph<N, E, Ty, Ix> is a graph datastructure using an adjacency list representation.

Graph is parameterized over:

• Associated data N for nodes and E for edges, called weights. The associated data can be of arbitrary type.
• Edge type Ty that determines whether the graph edges are directed or undirected.
• Index type Ix, which determines the maximum size of the graph.

The graph uses O(|V| + |E|) space, and allows fast node and edge insert, efficient graph search and graph algorithms. It implements O(e’) edge lookup and edge and node removals, where e’ is some local measure of edge count. Based on the graph datastructure used in rustc.

Here’s an example of building a graph with directed edges, and below an illustration of how it could be rendered with graphviz (see Dot):

use petgraph::Graph;

let mut deps = Graph::<&str, &str>::new();
let pg = deps.add_node("petgraph");
let fb = deps.add_node("fixedbitset");
let qc = deps.add_node("quickcheck");
let rand = deps.add_node("rand");
let libc = deps.add_node("libc");
deps.extend_with_edges(&[
    (pg, fb), (pg, qc),
    (qc, rand), (rand, libc), (qc, libc),
]);

Graph Indices

The graph maintains indices for nodes and edges, and node and edge weights may be accessed mutably. Indices range in a compact interval, for example for n nodes indices are 0 to n - 1 inclusive.

NodeIndex and EdgeIndex are types that act as references to nodes and edges, but these are only stable across certain operations. Adding nodes or edges keeps indices stable. Removing nodes or edges may shift other indices. Removing a node will force the last node to shift its index to take its place. Similarly, removing an edge shifts the index of the last edge.

The Ix parameter is u32 by default. The goal is that you can ignore this parameter completely unless you need a very big graph – then you can use usize.

Pros and Cons of Indices

• The fact that the node and edge indices in the graph each are numbered in compact intervals (from 0 to n - 1 for n nodes) simplifies some graph algorithms.

• You can select graph index integer type after the size of the graph. A smaller size may have better performance.

• Using indices allows mutation while traversing the graph, see Dfs, and .neighbors(a).detach().

• You can create several graphs using the equal node indices but with differing weights or differing edges.

• The Graph is a regular rust collection and is Send and Sync (as long as associated data N and E are).

• Some indices shift during node or edge removal, so that is a drawback of removing elements. Indices don’t allow as much compile time checking as references.

Fields

nodes: Vec<Node<N, Ix>>

edges: Vec<Edge<E, Ix>>

ty: PhantomData<Ty>

Implementations

impl<N, E> Graph<N, E, Directed>

pub fn new() -> Self

Create a new Graph with directed edges.

This is a convenience method. Use Graph::with_capacity or Graph::default for a constructor that is generic in all the type parameters of Graph.

impl<N, E> Graph<N, E, Undirected>

pub fn new_undirected() -> Self

Create a new Graph with undirected edges.

This is a convenience method. Use Graph::with_capacity or Graph::default for a constructor that is generic in all the type parameters of Graph.

impl<N, E, Ty, Ix> Graph<N, E, Ty, Ix>

where Ty: EdgeType, Ix: IndexType,

pub fn with_capacity(nodes: usize, edges: usize) -> Self

Create a new Graph with estimated capacity.

pub fn node_count(&self) -> usize

Return the number of nodes (vertices) in the graph.

Computes in O(1) time.

pub fn edge_count(&self) -> usize

Return the number of edges in the graph.

Computes in O(1) time.

pub fn is_directed(&self) -> bool

Whether the graph has directed edges or not.

pub fn add_node(&mut self, weight: N) -> NodeIndex<Ix>

Add a node (also called vertex) with associated data weight to the graph.

Computes in O(1) time.

Return the index of the new node.

Panics if the Graph is at the maximum number of nodes for its index type (N/A if usize).

pub fn node_weight(&self, a: NodeIndex<Ix>) -> Option<&N>

Access the weight for node a.

Also available with indexing syntax: &graph[a].

pub fn node_weight_mut(&mut self, a: NodeIndex<Ix>) -> Option<&mut N>

Access the weight for node a, mutably.

Also available with indexing syntax: &mut graph[a].

pub fn add_edge( &mut self, a: NodeIndex<Ix>, b: NodeIndex<Ix>, weight: E, ) -> EdgeIndex<Ix>

Add an edge from a to b to the graph, with its associated data weight.

Return the index of the new edge.

Computes in O(1) time.

Panics if any of the nodes don’t exist.
Panics if the Graph is at the maximum number of edges for its index type (N/A if usize).

Note: Graph allows adding parallel (“duplicate”) edges. If you want to avoid this, use .update_edge(a, b, weight) instead.

pub fn update_edge( &mut self, a: NodeIndex<Ix>, b: NodeIndex<Ix>, weight: E, ) -> EdgeIndex<Ix>

Add or update an edge from a to b. If the edge already exists, its weight is updated.

Return the index of the affected edge.

Computes in O(e’) time, where e’ is the number of edges connected to a (and b, if the graph edges are undirected).

Panics if any of the nodes don’t exist.

pub fn edge_weight(&self, e: EdgeIndex<Ix>) -> Option<&E>

Access the weight for edge e.

Also available with indexing syntax: &graph[e].

pub fn edge_weight_mut(&mut self, e: EdgeIndex<Ix>) -> Option<&mut E>

Access the weight for edge e, mutably.

Also available with indexing syntax: &mut graph[e].

pub fn edge_endpoints( &self, e: EdgeIndex<Ix>, ) -> Option<(NodeIndex<Ix>, NodeIndex<Ix>)>

Access the source and target nodes for e.

pub fn remove_node(&mut self, a: NodeIndex<Ix>) -> Option<N>

Remove a from the graph if it exists, and return its weight. If it doesn’t exist in the graph, return None.

Apart from a, this invalidates the last node index in the graph (that node will adopt the removed node index). Edge indices are invalidated as they would be following the removal of each edge with an endpoint in a.

Computes in O(e’) time, where e’ is the number of affected edges, including n calls to .remove_edge() where n is the number of edges with an endpoint in a, and including the edges with an endpoint in the displaced node.

fn change_edge_links( &mut self, edge_node: [NodeIndex<Ix>; 2], e: EdgeIndex<Ix>, edge_next: [EdgeIndex<Ix>; 2], )

For edge e with endpoints edge_node, replace links to it, with links to edge_next.

pub fn remove_edge(&mut self, e: EdgeIndex<Ix>) -> Option<E>

Remove an edge and return its edge weight, or None if it didn’t exist.

Apart from e, this invalidates the last edge index in the graph (that edge will adopt the removed edge index).

Computes in O(e’) time, where e’ is the size of four particular edge lists, for the vertices of e and the vertices of another affected edge.

fn remove_edge_adjust_indices(&mut self, e: EdgeIndex<Ix>) -> Option<E>

pub fn neighbors(&self, a: NodeIndex<Ix>) -> Neighbors<'_, E, Ix>

Return an iterator of all nodes with an edge starting from a.

• Directed: Outgoing edges from a.
• Undirected: All edges from or to a.

Produces an empty iterator if the node doesn’t exist.
Iterator element type is NodeIndex<Ix>.

Use .neighbors(a).detach() to get a neighbor walker that does not borrow from the graph.

pub fn neighbors_directed( &self, a: NodeIndex<Ix>, dir: Direction, ) -> Neighbors<'_, E, Ix>

Return an iterator of all neighbors that have an edge between them and a, in the specified direction. If the graph’s edges are undirected, this is equivalent to .neighbors(a).

• Directed, Outgoing: All edges from a.
• Directed, Incoming: All edges to a.
• Undirected: All edges from or to a.

Produces an empty iterator if the node doesn’t exist.
Iterator element type is NodeIndex<Ix>.

For a Directed graph, neighbors are listed in reverse order of their addition to the graph, so the most recently added edge’s neighbor is listed first. The order in an Undirected graph is arbitrary.

Use .neighbors_directed(a, dir).detach() to get a neighbor walker that does not borrow from the graph.

pub fn neighbors_undirected(&self, a: NodeIndex<Ix>) -> Neighbors<'_, E, Ix>

Return an iterator of all neighbors that have an edge between them and a, in either direction. If the graph’s edges are undirected, this is equivalent to .neighbors(a).

• Directed and Undirected: All edges from or to a.

Produces an empty iterator if the node doesn’t exist.
Iterator element type is NodeIndex<Ix>.

Use .neighbors_undirected(a).detach() to get a neighbor walker that does not borrow from the graph.

pub fn edges(&self, a: NodeIndex<Ix>) -> Edges<'_, E, Ty, Ix>

Return an iterator of all edges of a.

• Directed: Outgoing edges from a.
• Undirected: All edges connected to a.

Produces an empty iterator if the node doesn’t exist.
Iterator element type is EdgeReference<E, Ix>.

pub fn edges_directed( &self, a: NodeIndex<Ix>, dir: Direction, ) -> Edges<'_, E, Ty, Ix>

Return an iterator of all edges of a, in the specified direction.

• Directed, Outgoing: All edges from a.
• Directed, Incoming: All edges to a.
• Undirected: All edges connected to a.

Produces an empty iterator if the node a doesn’t exist.
Iterator element type is EdgeReference<E, Ix>.

fn edges_undirected(&self, a: NodeIndex<Ix>) -> Edges<'_, E, Ty, Ix>

Return an iterator over all edges connected to a.

• Directed and Undirected: All edges connected to a.

Produces an empty iterator if the node a doesn’t exist.
Iterator element type is EdgeReference<E, Ix>.

pub fn contains_edge(&self, a: NodeIndex<Ix>, b: NodeIndex<Ix>) -> bool

Lookup if there is an edge from a to b.

Computes in O(e’) time, where e’ is the number of edges connected to a (and b, if the graph edges are undirected).

pub fn find_edge( &self, a: NodeIndex<Ix>, b: NodeIndex<Ix>, ) -> Option<EdgeIndex<Ix>>

Lookup an edge from a to b.

Computes in O(e’) time, where e’ is the number of edges connected to a (and b, if the graph edges are undirected).

fn find_edge_directed_from_node( &self, node: &Node<N, Ix>, b: NodeIndex<Ix>, ) -> Option<EdgeIndex<Ix>>

pub fn find_edge_undirected( &self, a: NodeIndex<Ix>, b: NodeIndex<Ix>, ) -> Option<(EdgeIndex<Ix>, Direction)>

Lookup an edge between a and b, in either direction.

If the graph is undirected, then this is equivalent to .find_edge().

Return the edge index and its directionality, with Outgoing meaning from a to b and Incoming the reverse, or None if the edge does not exist.

fn find_edge_undirected_from_node( &self, node: &Node<N, Ix>, b: NodeIndex<Ix>, ) -> Option<(EdgeIndex<Ix>, Direction)>

pub fn externals(&self, dir: Direction) -> Externals<'_, N, Ty, Ix>

Return an iterator over either the nodes without edges to them (Incoming) or from them (Outgoing).

An internal node has both incoming and outgoing edges. The nodes in .externals(Incoming) are the source nodes and .externals(Outgoing) are the sinks of the graph.

For a graph with undirected edges, both the sinks and the sources are just the nodes without edges.

The whole iteration computes in O(|V|) time.

pub fn node_indices(&self) -> NodeIndices<Ix>

Return an iterator over the node indices of the graph

pub fn node_weights_mut(&mut self) -> NodeWeightsMut<'_, N, Ix>

Return an iterator yielding mutable access to all node weights.

The order in which weights are yielded matches the order of their node indices.

pub fn edge_indices(&self) -> EdgeIndices<Ix>

Return an iterator over the edge indices of the graph

pub fn edge_references(&self) -> EdgeReferences<'_, E, Ix>

Create an iterator over all edges, in indexed order.

Iterator element type is EdgeReference<E, Ix>.

pub fn edge_weights_mut(&mut self) -> EdgeWeightsMut<'_, E, Ix>

Return an iterator yielding mutable access to all edge weights.

The order in which weights are yielded matches the order of their edge indices.

pub fn raw_nodes(&self) -> &[Node<N, Ix>]

Access the internal node array.

pub fn raw_edges(&self) -> &[Edge<E, Ix>]

Access the internal edge array.

pub fn into_nodes_edges(self) -> (Vec<Node<N, Ix>>, Vec<Edge<E, Ix>>)

Convert the graph into a vector of Nodes and a vector of Edges

pub fn first_edge( &self, a: NodeIndex<Ix>, dir: Direction, ) -> Option<EdgeIndex<Ix>>

Accessor for data structure internals: the first edge in the given direction.

pub fn next_edge( &self, e: EdgeIndex<Ix>, dir: Direction, ) -> Option<EdgeIndex<Ix>>

Accessor for data structure internals: the next edge for the given direction.

pub fn index_twice_mut<T, U>( &mut self, i: T, j: U, ) -> (&mut <Self as Index<T>>::Output, &mut <Self as Index<U>>::Output)

where Self: IndexMut<T> + IndexMut<U>, T: GraphIndex, U: GraphIndex,

Index the Graph by two indices, any combination of node or edge indices is fine.

Panics if the indices are equal or if they are out of bounds.

use petgraph::{Graph, Incoming};
use petgraph::visit::Dfs;

let mut gr = Graph::new();
let a = gr.add_node(0.);
let b = gr.add_node(0.);
let c = gr.add_node(0.);
gr.add_edge(a, b, 3.);
gr.add_edge(b, c, 2.);
gr.add_edge(c, b, 1.);

// walk the graph and sum incoming edges into the node weight
let mut dfs = Dfs::new(&gr, a);
while let Some(node) = dfs.next(&gr) {
    // use a walker -- a detached neighbors iterator
    let mut edges = gr.neighbors_directed(node, Incoming).detach();
    while let Some(edge) = edges.next_edge(&gr) {
        let (nw, ew) = gr.index_twice_mut(node, edge);
        *nw += *ew;
    }
}

// check the result
assert_eq!(gr[a], 0.);
assert_eq!(gr[b], 4.);
assert_eq!(gr[c], 2.);

pub fn reverse(&mut self)

Reverse the direction of all edges

pub fn clear(&mut self)

Remove all nodes and edges

pub fn clear_edges(&mut self)

Remove all edges

pub fn capacity(&self) -> (usize, usize)

Return the current node and edge capacity of the graph.

pub fn reserve_nodes(&mut self, additional: usize)

Reserves capacity for at least additional more nodes to be inserted in the graph. Graph may reserve more space to avoid frequent reallocations.

Panics if the new capacity overflows usize.

pub fn reserve_edges(&mut self, additional: usize)

Reserves capacity for at least additional more edges to be inserted in the graph. Graph may reserve more space to avoid frequent reallocations.

Panics if the new capacity overflows usize.

pub fn reserve_exact_nodes(&mut self, additional: usize)

Reserves the minimum capacity for exactly additional more nodes to be inserted in the graph. Does nothing if the capacity is already sufficient.

Prefer reserve_nodes if future insertions are expected.

Panics if the new capacity overflows usize.

pub fn reserve_exact_edges(&mut self, additional: usize)

Reserves the minimum capacity for exactly additional more edges to be inserted in the graph. Does nothing if the capacity is already sufficient.

Prefer reserve_edges if future insertions are expected.

Panics if the new capacity overflows usize.

pub fn shrink_to_fit_nodes(&mut self)

Shrinks the capacity of the underlying nodes collection as much as possible.

pub fn shrink_to_fit_edges(&mut self)

Shrinks the capacity of the underlying edges collection as much as possible.

pub fn shrink_to_fit(&mut self)

Shrinks the capacity of the graph as much as possible.

pub fn retain_nodes<F>(&mut self, visit: F)

where F: FnMut(Frozen<'_, Self>, NodeIndex<Ix>) -> bool,

Keep all nodes that return true from the visit closure, remove the others.

visit is provided a proxy reference to the graph, so that the graph can be walked and associated data modified.

The order nodes are visited is not specified.

pub fn retain_edges<F>(&mut self, visit: F)

where F: FnMut(Frozen<'_, Self>, EdgeIndex<Ix>) -> bool,

Keep all edges that return true from the visit closure, remove the others.

visit is provided a proxy reference to the graph, so that the graph can be walked and associated data modified.

The order edges are visited is not specified.

pub fn from_edges<I>(iterable: I) -> Self

where I: IntoIterator, I::Item: IntoWeightedEdge<E>, <I::Item as IntoWeightedEdge<E>>::NodeId: Into<NodeIndex<Ix>>, N: Default,

Create a new Graph from an iterable of edges.

Node weights N are set to default values. Edge weights E may either be specified in the list, or they are filled with default values.

Nodes are inserted automatically to match the edges.

use petgraph::Graph;

let gr = Graph::<(), i32>::from_edges(&[
    (0, 1), (0, 2), (0, 3),
    (1, 2), (1, 3),
    (2, 3),
]);

pub fn extend_with_edges<I>(&mut self, iterable: I)

where I: IntoIterator, I::Item: IntoWeightedEdge<E>, <I::Item as IntoWeightedEdge<E>>::NodeId: Into<NodeIndex<Ix>>, N: Default,

Extend the graph from an iterable of edges.

Node weights N are set to default values. Edge weights E may either be specified in the list, or they are filled with default values.

Nodes are inserted automatically to match the edges.

pub fn map<'a, F, G, N2, E2>( &'a self, node_map: F, edge_map: G, ) -> Graph<N2, E2, Ty, Ix>

where F: FnMut(NodeIndex<Ix>, &'a N) -> N2, G: FnMut(EdgeIndex<Ix>, &'a E) -> E2,

Create a new Graph by mapping node and edge weights to new values.

The resulting graph has the same structure and the same graph indices as self.

pub fn filter_map<'a, F, G, N2, E2>( &'a self, node_map: F, edge_map: G, ) -> Graph<N2, E2, Ty, Ix>

where F: FnMut(NodeIndex<Ix>, &'a N) -> Option<N2>, G: FnMut(EdgeIndex<Ix>, &'a E) -> Option<E2>,

Create a new Graph by mapping nodes and edges. A node or edge may be mapped to None to exclude it from the resulting graph.

Nodes are mapped first with the node_map closure, then edge_map is called for the edges that have not had any endpoint removed.

The resulting graph has the structure of a subgraph of the original graph. If no nodes are removed, the resulting graph has compatible node indices; if neither nodes nor edges are removed, the result has the same graph indices as self.

pub fn into_edge_type<NewTy>(self) -> Graph<N, E, NewTy, Ix>

where NewTy: EdgeType,

Convert the graph into either undirected or directed. No edge adjustments are done, so you may want to go over the result to remove or add edges.

Computes in O(1) time.

Trait Implementations

impl<N, E, Ty, Ix> Build for Graph<N, E, Ty, Ix>

where Ty: EdgeType, Ix: IndexType,

fn add_node(&mut self, weight: Self::NodeWeight) -> Self::NodeId

fn add_edge( &mut self, a: Self::NodeId, b: Self::NodeId, weight: Self::EdgeWeight, ) -> Option<Self::EdgeId>

Add a new edge. If parallel edges (duplicate) are not allowed and the edge already exists, return None.

fn update_edge( &mut self, a: Self::NodeId, b: Self::NodeId, weight: Self::EdgeWeight, ) -> Self::EdgeId

Add or update the edge from a to b. Return the id of the affected edge.

impl<N, E, Ty, Ix: IndexType> Clone for Graph<N, E, Ty, Ix>

where N: Clone, E: Clone,

The resulting cloned graph has the same graph indices as self.

fn clone(&self) -> Self

Returns a copy of the value.

fn clone_from(&mut self, rhs: &Self)

Performs copy-assignment from source.

impl<N, E, Ty, Ix> Create for Graph<N, E, Ty, Ix>

where Ty: EdgeType, Ix: IndexType,

fn with_capacity(nodes: usize, edges: usize) -> Self

impl<N, E, Ty, Ix> Data for Graph<N, E, Ty, Ix>

where Ix: IndexType,

type NodeWeight = N

type EdgeWeight = E

impl<N, E, Ty, Ix> DataMap for Graph<N, E, Ty, Ix>

where Ty: EdgeType, Ix: IndexType,

fn node_weight(&self, id: Self::NodeId) -> Option<&Self::NodeWeight>

fn edge_weight(&self, id: Self::EdgeId) -> Option<&Self::EdgeWeight>

impl<N, E, Ty, Ix> DataMapMut for Graph<N, E, Ty, Ix>

where Ty: EdgeType, Ix: IndexType,

fn node_weight_mut(&mut self, id: Self::NodeId) -> Option<&mut Self::NodeWeight>

fn edge_weight_mut(&mut self, id: Self::EdgeId) -> Option<&mut Self::EdgeWeight>

impl<N, E, Ty, Ix> Debug for Graph<N, E, Ty, Ix>

where N: Debug, E: Debug, Ty: EdgeType, Ix: IndexType,

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl<N, E, Ty, Ix> Default for Graph<N, E, Ty, Ix>

where Ty: EdgeType, Ix: IndexType,

Create a new empty Graph.

fn default() -> Self

Returns the “default value” for a type.

impl<N, E, Ty, Ix> From<Graph<N, E, Ty, Ix>> for StableGraph<N, E, Ty, Ix>

where Ty: EdgeType, Ix: IndexType,

Convert a Graph into a StableGraph

Computes in O(|V| + |E|) time.

The resulting graph has the same node and edge indices as the original graph.

fn from(g: Graph<N, E, Ty, Ix>) -> Self

Converts to this type from the input type.

impl<N, E, Ty, Ix> From<StableGraph<N, E, Ty, Ix>> for Graph<N, E, Ty, Ix>

where Ty: EdgeType, Ix: IndexType,

Convert a StableGraph into a Graph

Computes in O(|V| + |E|) time.

This translates the stable graph into a graph with node and edge indices in a compact interval without holes (like Graphs always are).

Only if the stable graph had no vacancies after deletions (if node bound was equal to node count, and the same for edges), would the resulting graph have the same node and edge indices as the input.

fn from(graph: StableGraph<N, E, Ty, Ix>) -> Self

Converts to this type from the input type.

impl<N, E, Ty, Ix> FromElements for Graph<N, E, Ty, Ix>

where Ty: EdgeType, Ix: IndexType,

fn from_elements<I>(iterable: I) -> Self

where Self: Sized, I: IntoIterator<Item = Element<Self::NodeWeight, Self::EdgeWeight>>,

impl<N, E, Ty, Ix> GetAdjacencyMatrix for Graph<N, E, Ty, Ix>

where Ty: EdgeType, Ix: IndexType,

The adjacency matrix for Graph is a bitmap that’s computed by .adjacency_matrix().

type AdjMatrix = FixedBitSet

The associated adjacency matrix type

fn adjacency_matrix(&self) -> FixedBitSet

Create the adjacency matrix

fn is_adjacent( &self, matrix: &FixedBitSet, a: NodeIndex<Ix>, b: NodeIndex<Ix>, ) -> bool

Return true if there is an edge from a to b, false otherwise.

impl<N, E, Ty, Ix> GraphBase for Graph<N, E, Ty, Ix>

where Ix: IndexType,

type NodeId = NodeIndex<Ix>

node identifier

type EdgeId = EdgeIndex<Ix>

edge identifier

impl<N, E, Ty, Ix> GraphProp for Graph<N, E, Ty, Ix>

where Ty: EdgeType, Ix: IndexType,

type EdgeType = Ty

The kind edges in the graph.

fn is_directed(&self) -> bool

impl<N, E, Ty, Ix> Index<EdgeIndex<Ix>> for Graph<N, E, Ty, Ix>

where Ty: EdgeType, Ix: IndexType,

Index the Graph by EdgeIndex to access edge weights.

Panics if the edge doesn’t exist.

type Output = E

The returned type after indexing.

fn index(&self, index: EdgeIndex<Ix>) -> &E

Performs the indexing (container[index]) operation.

impl<N, E, Ty, Ix> Index<NodeIndex<Ix>> for Graph<N, E, Ty, Ix>

where Ty: EdgeType, Ix: IndexType,

Index the Graph by NodeIndex to access node weights.

Panics if the node doesn’t exist.

type Output = N

The returned type after indexing.

fn index(&self, index: NodeIndex<Ix>) -> &N

Performs the indexing (container[index]) operation.

impl<N, E, Ty, Ix> IndexMut<EdgeIndex<Ix>> for Graph<N, E, Ty, Ix>

where Ty: EdgeType, Ix: IndexType,

Index the Graph by EdgeIndex to access edge weights.

Panics if the edge doesn’t exist.

fn index_mut(&mut self, index: EdgeIndex<Ix>) -> &mut E

Performs the mutable indexing (container[index]) operation.

impl<N, E, Ty, Ix> IndexMut<NodeIndex<Ix>> for Graph<N, E, Ty, Ix>

where Ty: EdgeType, Ix: IndexType,

Index the Graph by NodeIndex to access node weights.

Panics if the node doesn’t exist.

fn index_mut(&mut self, index: NodeIndex<Ix>) -> &mut N

Performs the mutable indexing (container[index]) operation.

impl<'a, N: 'a, E: 'a, Ty, Ix> IntoEdgeReferences for &'a Graph<N, E, Ty, Ix>

where Ty: EdgeType, Ix: IndexType,

type EdgeRef = EdgeReference<'a, E, Ix>

type EdgeReferences = EdgeReferences<'a, E, Ix>

fn edge_references(self) -> Self::EdgeReferences

impl<'a, N, E, Ty, Ix> IntoEdges for &'a Graph<N, E, Ty, Ix>

where Ty: EdgeType, Ix: IndexType,

type Edges = Edges<'a, E, Ty, Ix>

fn edges(self, a: Self::NodeId) -> Self::Edges

impl<'a, N, E, Ty, Ix> IntoEdgesDirected for &'a Graph<N, E, Ty, Ix>

where Ty: EdgeType, Ix: IndexType,

type EdgesDirected = Edges<'a, E, Ty, Ix>

fn edges_directed(self, a: Self::NodeId, dir: Direction) -> Self::EdgesDirected

impl<'a, N, E: 'a, Ty, Ix> IntoNeighbors for &'a Graph<N, E, Ty, Ix>

where Ty: EdgeType, Ix: IndexType,

type Neighbors = Neighbors<'a, E, Ix>

fn neighbors(self, n: NodeIndex<Ix>) -> Neighbors<'a, E, Ix>

Return an iterator of the neighbors of node a.

impl<'a, N, E: 'a, Ty, Ix> IntoNeighborsDirected for &'a Graph<N, E, Ty, Ix>

where Ty: EdgeType, Ix: IndexType,

type NeighborsDirected = Neighbors<'a, E, Ix>

fn neighbors_directed( self, n: NodeIndex<Ix>, d: Direction, ) -> Neighbors<'a, E, Ix>

impl<'a, N, E: 'a, Ty, Ix> IntoNodeIdentifiers for &'a Graph<N, E, Ty, Ix>

where Ty: EdgeType, Ix: IndexType,

type NodeIdentifiers = NodeIndices<Ix>

fn node_identifiers(self) -> NodeIndices<Ix>

impl<'a, N, E, Ty, Ix> IntoNodeReferences for &'a Graph<N, E, Ty, Ix>

where Ty: EdgeType, Ix: IndexType,

type NodeRef = (NodeIndex<Ix>, &'a N)

type NodeReferences = NodeReferences<'a, N, Ix>

fn node_references(self) -> Self::NodeReferences

impl<N, E, Ty, Ix> NodeCount for Graph<N, E, Ty, Ix>

where Ty: EdgeType, Ix: IndexType,

fn node_count(&self) -> usize

impl<N, E, Ty, Ix> NodeIndexable for Graph<N, E, Ty, Ix>

where Ty: EdgeType, Ix: IndexType,

fn node_bound(&self) -> usize

Return an upper bound of the node indices in the graph (suitable for the size of a bitmap).

fn to_index(&self, ix: NodeIndex<Ix>) -> usize

Convert a to an integer index.

fn from_index(&self, ix: usize) -> Self::NodeId

Convert i to a node index

impl<N, E, Ty, Ix> Visitable for Graph<N, E, Ty, Ix>

where Ty: EdgeType, Ix: IndexType,

type Map = FixedBitSet

The associated map type

fn visit_map(&self) -> FixedBitSet

Create a new visitor map

fn reset_map(&self, map: &mut Self::Map)

Reset the visitor map (and resize to new size of graph if needed)

impl<N, E, Ty, Ix> NodeCompactIndexable for Graph<N, E, Ty, Ix>

where Ty: EdgeType, Ix: IndexType,