Struct wgpu_hal::TextureUses

pub struct TextureUses(pub(crate) <TextureUses as PublicFlags>::Internal);

Similar to wgt::TextureUsages but for internal use.

Tuple Fields

0: <TextureUses as PublicFlags>::Internal

Implementations

impl TextureUses

pub const UNINITIALIZED: Self = _

The texture is in unknown state.

pub const PRESENT: Self = _

Ready to present image to the surface.

pub const COPY_SRC: Self = _

The source of a hardware copy.

pub const COPY_DST: Self = _

The destination of a hardware copy.

pub const RESOURCE: Self = _

Read-only sampled or fetched resource.

pub const COLOR_TARGET: Self = _

The color target of a renderpass.

pub const DEPTH_STENCIL_READ: Self = _

Read-only depth stencil usage.

pub const DEPTH_STENCIL_WRITE: Self = _

Read-write depth stencil usage

pub const STORAGE_READ_ONLY: Self = _

Read-only storage texture usage. Corresponds to a UAV in d3d, so is exclusive, despite being read only.

pub const STORAGE_WRITE_ONLY: Self = _

Write-only storage texture usage.

pub const STORAGE_READ_WRITE: Self = _

Read-write storage texture usage.

pub const INCLUSIVE: Self = _

The combination of states that a texture may be in at the same time.

pub const EXCLUSIVE: Self = _

The combination of states that a texture must exclusively be in.

pub const ORDERED: Self = _

The combination of all usages that the are guaranteed to be be ordered by the hardware. If a usage is ordered, then if the texture state doesn’t change between draw calls, there are no barriers needed for synchronization.

pub const COMPLEX: Self = _

Flag used by the wgpu-core texture tracker to say a texture is in different states for every sub-resource

pub const UNKNOWN: Self = _

Flag used by the wgpu-core texture tracker to say that the tracker does not know the state of the sub-resource. This is different from UNINITIALIZED as that says the tracker does know, but the texture has not been initialized.

impl TextureUses

pub const fn empty() -> Self

Get a flags value with all bits unset.

pub const fn all() -> Self

Get a flags value with all known bits set.

pub const fn bits(&self) -> u16

Get the underlying bits value.

The returned value is exactly the bits set in this flags value.

pub const fn from_bits(bits: u16) -> Option<Self>

Convert from a bits value.

This method will return None if any unknown bits are set.

pub const fn from_bits_truncate(bits: u16) -> Self

Convert from a bits value, unsetting any unknown bits.

pub const fn from_bits_retain(bits: u16) -> Self

Convert from a bits value exactly.

pub fn from_name(name: &str) -> Option<Self>

Get a flags value with the bits of a flag with the given name set.

This method will return None if name is empty or doesn’t correspond to any named flag.

pub const fn is_empty(&self) -> bool

Whether all bits in this flags value are unset.

pub const fn is_all(&self) -> bool

Whether all known bits in this flags value are set.

pub const fn intersects(&self, other: Self) -> bool

Whether any set bits in a source flags value are also set in a target flags value.

pub const fn contains(&self, other: Self) -> bool

Whether all set bits in a source flags value are also set in a target flags value.

pub fn insert(&mut self, other: Self)

The bitwise or (|) of the bits in two flags values.

pub fn remove(&mut self, other: Self)

The intersection of a source flags value with the complement of a target flags value (&!).

This method is not equivalent to self & !other when other has unknown bits set. remove won’t truncate other, but the ! operator will.

pub fn toggle(&mut self, other: Self)

The bitwise exclusive-or (^) of the bits in two flags values.

pub fn set(&mut self, other: Self, value: bool)

Call insert when value is true or remove when value is false.

pub const fn intersection(self, other: Self) -> Self

The bitwise and (&) of the bits in two flags values.

pub const fn union(self, other: Self) -> Self

The bitwise or (|) of the bits in two flags values.

pub const fn difference(self, other: Self) -> Self

The intersection of a source flags value with the complement of a target flags value (&!).

This method is not equivalent to self & !other when other has unknown bits set. difference won’t truncate other, but the ! operator will.

pub const fn symmetric_difference(self, other: Self) -> Self

The bitwise exclusive-or (^) of the bits in two flags values.

pub const fn complement(self) -> Self

The bitwise negation (!) of the bits in a flags value, truncating the result.

impl TextureUses

pub const fn iter(&self) -> Iter<TextureUses>

Yield a set of contained flags values.

Each yielded flags value will correspond to a defined named flag. Any unknown bits will be yielded together as a final flags value.

pub const fn iter_names(&self) -> IterNames<TextureUses>

Yield a set of contained named flags values.

This method is like iter, except only yields bits in contained named flags. Any unknown bits, or bits not corresponding to a contained flag will not be yielded.

Trait Implementations

impl Binary for TextureUses

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl BitAnd for TextureUses

fn bitand(self, other: Self) -> Self

The bitwise and (&) of the bits in two flags values.

type Output = TextureUses

The resulting type after applying the & operator.

impl BitAndAssign for TextureUses

fn bitand_assign(&mut self, other: Self)

The bitwise and (&) of the bits in two flags values.

impl BitOr for TextureUses

fn bitor(self, other: TextureUses) -> Self

The bitwise or (|) of the bits in two flags values.

type Output = TextureUses

The resulting type after applying the | operator.

impl BitOrAssign for TextureUses

fn bitor_assign(&mut self, other: Self)

The bitwise or (|) of the bits in two flags values.

impl BitXor for TextureUses

fn bitxor(self, other: Self) -> Self

The bitwise exclusive-or (^) of the bits in two flags values.

type Output = TextureUses

The resulting type after applying the ^ operator.

impl BitXorAssign for TextureUses

fn bitxor_assign(&mut self, other: Self)

The bitwise exclusive-or (^) of the bits in two flags values.

impl Clone for TextureUses

fn clone(&self) -> TextureUses

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for TextureUses

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Extend<TextureUses> for TextureUses

fn extend<T: IntoIterator<Item = Self>>(&mut self, iterator: T)

The bitwise or (|) of the bits in each flags value.

fn extend_one(&mut self, item: A)

🔬This is a nightly-only experimental API. (extend_one)

Extends a collection with exactly one element.

fn extend_reserve(&mut self, additional: usize)

🔬This is a nightly-only experimental API. (extend_one)

Reserves capacity in a collection for the given number of additional elements.

impl Flags for TextureUses

const FLAGS: &'static [Flag<TextureUses>] = _

The set of defined flags.

type Bits = u16

The underlying bits type.

fn bits(&self) -> u16

Get the underlying bits value.

fn from_bits_retain(bits: u16) -> TextureUses

Convert from a bits value exactly.

fn empty() -> Self

Get a flags value with all bits unset.

fn all() -> Self

Get a flags value with all known bits set.

fn from_bits(bits: Self::Bits) -> Option<Self>

Convert from a bits value.

fn from_bits_truncate(bits: Self::Bits) -> Self

Convert from a bits value, unsetting any unknown bits.

fn from_name(name: &str) -> Option<Self>

Get a flags value with the bits of a flag with the given name set.

fn iter(&self) -> Iter<Self>

Yield a set of contained flags values.

fn iter_names(&self) -> IterNames<Self>

Yield a set of contained named flags values.

fn is_empty(&self) -> bool

Whether all bits in this flags value are unset.

fn is_all(&self) -> bool

Whether all known bits in this flags value are set.

fn intersects(&self, other: Self) -> bool

where Self: Sized,

Whether any set bits in a source flags value are also set in a target flags value.

fn contains(&self, other: Self) -> bool

where Self: Sized,

Whether all set bits in a source flags value are also set in a target flags value.

fn insert(&mut self, other: Self)

where Self: Sized,

The bitwise or (|) of the bits in two flags values.

fn remove(&mut self, other: Self)

where Self: Sized,

The intersection of a source flags value with the complement of a target flags value (&!).

fn toggle(&mut self, other: Self)

where Self: Sized,

The bitwise exclusive-or (^) of the bits in two flags values.

fn set(&mut self, other: Self, value: bool)

where Self: Sized,

Call Flags::insert when value is true or Flags::remove when value is false.

fn intersection(self, other: Self) -> Self

The bitwise and (&) of the bits in two flags values.

fn union(self, other: Self) -> Self

The bitwise or (|) of the bits in two flags values.

fn difference(self, other: Self) -> Self

The intersection of a source flags value with the complement of a target flags value (&!).

fn symmetric_difference(self, other: Self) -> Self

The bitwise exclusive-or (^) of the bits in two flags values.

fn complement(self) -> Self

The bitwise negation (!) of the bits in a flags value, truncating the result.

impl FromIterator<TextureUses> for TextureUses

fn from_iter<T: IntoIterator<Item = Self>>(iterator: T) -> Self

The bitwise or (|) of the bits in each flags value.

impl Hash for TextureUses

fn hash<__H: Hasher>(&self, state: &mut __H)

Feeds this value into the given Hasher.

fn hash_slice<H>(data: &[Self], state: &mut H)

where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher.

impl IntoIterator for TextureUses

type Item = TextureUses

The type of the elements being iterated over.

type IntoIter = Iter<TextureUses>

Which kind of iterator are we turning this into?

fn into_iter(self) -> Self::IntoIter

Creates an iterator from a value.

impl LowerHex for TextureUses

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Not for TextureUses

fn not(self) -> Self

The bitwise negation (!) of the bits in a flags value, truncating the result.

type Output = TextureUses

The resulting type after applying the ! operator.

impl Octal for TextureUses

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl PartialEq for TextureUses

fn eq(&self, other: &TextureUses) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PublicFlags for TextureUses

type Primitive = u16

The type of the underlying storage.

type Internal = InternalBitFlags

The type of the internal field on the generated flags type.

impl Sub for TextureUses

fn sub(self, other: Self) -> Self

The intersection of a source flags value with the complement of a target flags value (&!).

This method is not equivalent to self & !other when other has unknown bits set. difference won’t truncate other, but the ! operator will.

type Output = TextureUses

The resulting type after applying the - operator.

impl SubAssign for TextureUses

fn sub_assign(&mut self, other: Self)

The intersection of a source flags value with the complement of a target flags value (&!).

This method is not equivalent to self & !other when other has unknown bits set. difference won’t truncate other, but the ! operator will.

impl UpperHex for TextureUses

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Copy for TextureUses

impl Eq for TextureUses

impl StructuralPartialEq for TextureUses