Struct hashbrown::raw::inner::RawIterRange

source ·
pub(crate) struct RawIterRange<T> {
    current_group: BitMaskIter,
    data: Bucket<T>,
    next_ctrl: *const u8,
    end: *const u8,
}
Expand description

Iterator over a sub-range of a table. Unlike RawIter this iterator does not track an item count.

Fields§

§current_group: BitMaskIter§data: Bucket<T>§next_ctrl: *const u8§end: *const u8

Implementations§

source§

impl<T> RawIterRange<T>

source

unsafe fn new(ctrl: *const u8, data: Bucket<T>, len: usize) -> Self

Returns a RawIterRange covering a subset of a table.

§Safety

If any of the following conditions are violated, the result is undefined behavior:

  • ctrl must be valid for reads, i.e. table outlives the RawIterRange;

  • ctrl must be properly aligned to the group size (Group::WIDTH);

  • ctrl must point to the array of properly initialized control bytes;

  • data must be the Bucket at the ctrl index in the table;

  • the value of len must be less than or equal to the number of table buckets, and the returned value of ctrl.as_ptr().add(len).offset_from(ctrl.as_ptr()) must be positive.

  • The ctrl.add(len) pointer must be either in bounds or one byte past the end of the same [allocated table].

  • The len must be a power of two.

source

unsafe fn next_impl<const DO_CHECK_PTR_RANGE: bool>( &mut self, ) -> Option<Bucket<T>>

§Safety

If DO_CHECK_PTR_RANGE is false, caller must ensure that we never try to iterate after yielding all elements.

source

unsafe fn fold_impl<F, B>(self, n: usize, acc: B, f: F) -> B
where F: FnMut(B, Bucket<T>) -> B,

Folds every element into an accumulator by applying an operation, returning the final result.

fold_impl() takes three arguments: the number of items remaining in the iterator, an initial value, and a closure with two arguments: an ‘accumulator’, and an element. The closure returns the value that the accumulator should have for the next iteration.

The initial value is the value the accumulator will have on the first call.

After applying this closure to every element of the iterator, fold_impl() returns the accumulator.

§Safety

If any of the following conditions are violated, the result is Undefined Behavior:

  • The RawTableInner / RawTable must be alive and not moved, i.e. table outlives the RawIterRange;

  • The provided n value must match the actual number of items in the table.

Trait Implementations§

source§

impl<T> Clone for RawIterRange<T>

source§

fn clone(&self) -> Self

Returns a copy of the value. Read more
1.0.0 · source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
source§

impl<T> Iterator for RawIterRange<T>

§

type Item = Bucket<T>

The type of the elements being iterated over.
source§

fn next(&mut self) -> Option<Bucket<T>>

Advances the iterator and returns the next value. Read more
source§

fn size_hint(&self) -> (usize, Option<usize>)

Returns the bounds on the remaining length of the iterator. Read more
source§

fn next_chunk<const N: usize>( &mut self, ) -> Result<[Self::Item; N], IntoIter<Self::Item, N>>
where Self: Sized,

🔬This is a nightly-only experimental API. (iter_next_chunk)
Advances the iterator and returns an array containing the next N values. Read more
1.0.0 · source§

fn count(self) -> usize
where Self: Sized,

Consumes the iterator, counting the number of iterations and returning it. Read more
1.0.0 · source§

fn last(self) -> Option<Self::Item>
where Self: Sized,

Consumes the iterator, returning the last element. Read more
source§

fn advance_by(&mut self, n: usize) -> Result<(), NonZero<usize>>

🔬This is a nightly-only experimental API. (iter_advance_by)
Advances the iterator by n elements. Read more
1.0.0 · source§

fn nth(&mut self, n: usize) -> Option<Self::Item>

Returns the nth element of the iterator. Read more
1.28.0 · source§

fn step_by(self, step: usize) -> StepBy<Self>
where Self: Sized,

Creates an iterator starting at the same point, but stepping by the given amount at each iteration. Read more
1.0.0 · source§

fn chain<U>(self, other: U) -> Chain<Self, <U as IntoIterator>::IntoIter>
where Self: Sized, U: IntoIterator<Item = Self::Item>,

Takes two iterators and creates a new iterator over both in sequence. Read more
1.0.0 · source§

fn zip<U>(self, other: U) -> Zip<Self, <U as IntoIterator>::IntoIter>
where Self: Sized, U: IntoIterator,

‘Zips up’ two iterators into a single iterator of pairs. Read more
source§

fn intersperse_with<G>(self, separator: G) -> IntersperseWith<Self, G>
where Self: Sized, G: FnMut() -> Self::Item,

🔬This is a nightly-only experimental API. (iter_intersperse)
Creates a new iterator which places an item generated by separator between adjacent items of the original iterator. Read more
1.0.0 · source§

fn map<B, F>(self, f: F) -> Map<Self, F>
where Self: Sized, F: FnMut(Self::Item) -> B,

Takes a closure and creates an iterator which calls that closure on each element. Read more
1.21.0 · source§

fn for_each<F>(self, f: F)
where Self: Sized, F: FnMut(Self::Item),

Calls a closure on each element of an iterator. Read more
1.0.0 · source§

fn filter<P>(self, predicate: P) -> Filter<Self, P>
where Self: Sized, P: FnMut(&Self::Item) -> bool,

Creates an iterator which uses a closure to determine if an element should be yielded. Read more
1.0.0 · source§

fn filter_map<B, F>(self, f: F) -> FilterMap<Self, F>
where Self: Sized, F: FnMut(Self::Item) -> Option<B>,

Creates an iterator that both filters and maps. Read more
1.0.0 · source§

fn enumerate(self) -> Enumerate<Self>
where Self: Sized,

Creates an iterator which gives the current iteration count as well as the next value. Read more
1.0.0 · source§

fn peekable(self) -> Peekable<Self>
where Self: Sized,

Creates an iterator which can use the peek and peek_mut methods to look at the next element of the iterator without consuming it. See their documentation for more information. Read more
1.0.0 · source§

fn skip_while<P>(self, predicate: P) -> SkipWhile<Self, P>
where Self: Sized, P: FnMut(&Self::Item) -> bool,

Creates an iterator that skips elements based on a predicate. Read more
1.0.0 · source§

fn take_while<P>(self, predicate: P) -> TakeWhile<Self, P>
where Self: Sized, P: FnMut(&Self::Item) -> bool,

Creates an iterator that yields elements based on a predicate. Read more
1.57.0 · source§

fn map_while<B, P>(self, predicate: P) -> MapWhile<Self, P>
where Self: Sized, P: FnMut(Self::Item) -> Option<B>,

Creates an iterator that both yields elements based on a predicate and maps. Read more
1.0.0 · source§

fn skip(self, n: usize) -> Skip<Self>
where Self: Sized,

Creates an iterator that skips the first n elements. Read more
1.0.0 · source§

fn take(self, n: usize) -> Take<Self>
where Self: Sized,

Creates an iterator that yields the first n elements, or fewer if the underlying iterator ends sooner. Read more
1.0.0 · source§

fn scan<St, B, F>(self, initial_state: St, f: F) -> Scan<Self, St, F>
where Self: Sized, F: FnMut(&mut St, Self::Item) -> Option<B>,

An iterator adapter which, like fold, holds internal state, but unlike fold, produces a new iterator. Read more
1.0.0 · source§

fn flat_map<U, F>(self, f: F) -> FlatMap<Self, U, F>
where Self: Sized, U: IntoIterator, F: FnMut(Self::Item) -> U,

Creates an iterator that works like map, but flattens nested structure. Read more
source§

fn map_windows<F, R, const N: usize>(self, f: F) -> MapWindows<Self, F, N>
where Self: Sized, F: FnMut(&[Self::Item; N]) -> R,

🔬This is a nightly-only experimental API. (iter_map_windows)
Calls the given function f for each contiguous window of size N over self and returns an iterator over the outputs of f. Like slice::windows(), the windows during mapping overlap as well. Read more
1.0.0 · source§

fn fuse(self) -> Fuse<Self>
where Self: Sized,

Creates an iterator which ends after the first None. Read more
1.0.0 · source§

fn inspect<F>(self, f: F) -> Inspect<Self, F>
where Self: Sized, F: FnMut(&Self::Item),

Does something with each element of an iterator, passing the value on. Read more
1.0.0 · source§

fn by_ref(&mut self) -> &mut Self
where Self: Sized,

Borrows an iterator, rather than consuming it. Read more
1.0.0 · source§

fn collect<B>(self) -> B
where B: FromIterator<Self::Item>, Self: Sized,

Transforms an iterator into a collection. Read more
source§

fn collect_into<E>(self, collection: &mut E) -> &mut E
where E: Extend<Self::Item>, Self: Sized,

🔬This is a nightly-only experimental API. (iter_collect_into)
Collects all the items from an iterator into a collection. Read more
1.0.0 · source§

fn partition<B, F>(self, f: F) -> (B, B)
where Self: Sized, B: Default + Extend<Self::Item>, F: FnMut(&Self::Item) -> bool,

Consumes an iterator, creating two collections from it. Read more
source§

fn is_partitioned<P>(self, predicate: P) -> bool
where Self: Sized, P: FnMut(Self::Item) -> bool,

🔬This is a nightly-only experimental API. (iter_is_partitioned)
Checks if the elements of this iterator are partitioned according to the given predicate, such that all those that return true precede all those that return false. Read more
1.27.0 · source§

fn try_fold<B, F, R>(&mut self, init: B, f: F) -> R
where Self: Sized, F: FnMut(B, Self::Item) -> R, R: Try<Output = B>,

An iterator method that applies a function as long as it returns successfully, producing a single, final value. Read more
1.27.0 · source§

fn try_for_each<F, R>(&mut self, f: F) -> R
where Self: Sized, F: FnMut(Self::Item) -> R, R: Try<Output = ()>,

An iterator method that applies a fallible function to each item in the iterator, stopping at the first error and returning that error. Read more
1.0.0 · source§

fn fold<B, F>(self, init: B, f: F) -> B
where Self: Sized, F: FnMut(B, Self::Item) -> B,

Folds every element into an accumulator by applying an operation, returning the final result. Read more
1.51.0 · source§

fn reduce<F>(self, f: F) -> Option<Self::Item>
where Self: Sized, F: FnMut(Self::Item, Self::Item) -> Self::Item,

Reduces the elements to a single one, by repeatedly applying a reducing operation. Read more
source§

fn try_reduce<F, R>( &mut self, f: F, ) -> <<R as Try>::Residual as Residual<Option<<R as Try>::Output>>>::TryType
where Self: Sized, F: FnMut(Self::Item, Self::Item) -> R, R: Try<Output = Self::Item>, <R as Try>::Residual: Residual<Option<Self::Item>>,

🔬This is a nightly-only experimental API. (iterator_try_reduce)
Reduces the elements to a single one by repeatedly applying a reducing operation. If the closure returns a failure, the failure is propagated back to the caller immediately. Read more
1.0.0 · source§

fn all<F>(&mut self, f: F) -> bool
where Self: Sized, F: FnMut(Self::Item) -> bool,

Tests if every element of the iterator matches a predicate. Read more
1.0.0 · source§

fn any<F>(&mut self, f: F) -> bool
where Self: Sized, F: FnMut(Self::Item) -> bool,

Tests if any element of the iterator matches a predicate. Read more
1.0.0 · source§

fn find<P>(&mut self, predicate: P) -> Option<Self::Item>
where Self: Sized, P: FnMut(&Self::Item) -> bool,

Searches for an element of an iterator that satisfies a predicate. Read more
1.30.0 · source§

fn find_map<B, F>(&mut self, f: F) -> Option<B>
where Self: Sized, F: FnMut(Self::Item) -> Option<B>,

Applies function to the elements of iterator and returns the first non-none result. Read more
source§

fn try_find<F, R>( &mut self, f: F, ) -> <<R as Try>::Residual as Residual<Option<Self::Item>>>::TryType
where Self: Sized, F: FnMut(&Self::Item) -> R, R: Try<Output = bool>, <R as Try>::Residual: Residual<Option<Self::Item>>,

🔬This is a nightly-only experimental API. (try_find)
Applies function to the elements of iterator and returns the first true result or the first error. Read more
1.0.0 · source§

fn position<P>(&mut self, predicate: P) -> Option<usize>
where Self: Sized, P: FnMut(Self::Item) -> bool,

Searches for an element in an iterator, returning its index. Read more
1.6.0 · source§

fn max_by_key<B, F>(self, f: F) -> Option<Self::Item>
where B: Ord, Self: Sized, F: FnMut(&Self::Item) -> B,

Returns the element that gives the maximum value from the specified function. Read more
1.15.0 · source§

fn max_by<F>(self, compare: F) -> Option<Self::Item>
where Self: Sized, F: FnMut(&Self::Item, &Self::Item) -> Ordering,

Returns the element that gives the maximum value with respect to the specified comparison function. Read more
1.6.0 · source§

fn min_by_key<B, F>(self, f: F) -> Option<Self::Item>
where B: Ord, Self: Sized, F: FnMut(&Self::Item) -> B,

Returns the element that gives the minimum value from the specified function. Read more
1.15.0 · source§

fn min_by<F>(self, compare: F) -> Option<Self::Item>
where Self: Sized, F: FnMut(&Self::Item, &Self::Item) -> Ordering,

Returns the element that gives the minimum value with respect to the specified comparison function. Read more
1.0.0 · source§

fn unzip<A, B, FromA, FromB>(self) -> (FromA, FromB)
where FromA: Default + Extend<A>, FromB: Default + Extend<B>, Self: Sized + Iterator<Item = (A, B)>,

Converts an iterator of pairs into a pair of containers. Read more
1.36.0 · source§

fn copied<'a, T>(self) -> Copied<Self>
where T: 'a + Copy, Self: Sized + Iterator<Item = &'a T>,

Creates an iterator which copies all of its elements. Read more
1.0.0 · source§

fn cloned<'a, T>(self) -> Cloned<Self>
where T: 'a + Clone, Self: Sized + Iterator<Item = &'a T>,

Creates an iterator which clones all of its elements. Read more
1.0.0 · source§

fn cycle(self) -> Cycle<Self>
where Self: Sized + Clone,

Repeats an iterator endlessly. Read more
source§

fn array_chunks<const N: usize>(self) -> ArrayChunks<Self, N>
where Self: Sized,

🔬This is a nightly-only experimental API. (iter_array_chunks)
Returns an iterator over N elements of the iterator at a time. Read more
1.11.0 · source§

fn sum<S>(self) -> S
where Self: Sized, S: Sum<Self::Item>,

Sums the elements of an iterator. Read more
1.11.0 · source§

fn product<P>(self) -> P
where Self: Sized, P: Product<Self::Item>,

Iterates over the entire iterator, multiplying all the elements Read more
source§

fn cmp_by<I, F>(self, other: I, cmp: F) -> Ordering
where Self: Sized, I: IntoIterator, F: FnMut(Self::Item, <I as IntoIterator>::Item) -> Ordering,

🔬This is a nightly-only experimental API. (iter_order_by)
Lexicographically compares the elements of this Iterator with those of another with respect to the specified comparison function. Read more
1.5.0 · source§

fn partial_cmp<I>(self, other: I) -> Option<Ordering>
where I: IntoIterator, Self::Item: PartialOrd<<I as IntoIterator>::Item>, Self: Sized,

Lexicographically compares the PartialOrd elements of this Iterator with those of another. The comparison works like short-circuit evaluation, returning a result without comparing the remaining elements. As soon as an order can be determined, the evaluation stops and a result is returned. Read more
source§

fn partial_cmp_by<I, F>(self, other: I, partial_cmp: F) -> Option<Ordering>
where Self: Sized, I: IntoIterator, F: FnMut(Self::Item, <I as IntoIterator>::Item) -> Option<Ordering>,

🔬This is a nightly-only experimental API. (iter_order_by)
Lexicographically compares the elements of this Iterator with those of another with respect to the specified comparison function. Read more
1.5.0 · source§

fn eq<I>(self, other: I) -> bool
where I: IntoIterator, Self::Item: PartialEq<<I as IntoIterator>::Item>, Self: Sized,

Determines if the elements of this Iterator are equal to those of another. Read more
source§

fn eq_by<I, F>(self, other: I, eq: F) -> bool
where Self: Sized, I: IntoIterator, F: FnMut(Self::Item, <I as IntoIterator>::Item) -> bool,

🔬This is a nightly-only experimental API. (iter_order_by)
Determines if the elements of this Iterator are equal to those of another with respect to the specified equality function. Read more
1.5.0 · source§

fn ne<I>(self, other: I) -> bool
where I: IntoIterator, Self::Item: PartialEq<<I as IntoIterator>::Item>, Self: Sized,

Determines if the elements of this Iterator are not equal to those of another. Read more
1.5.0 · source§

fn lt<I>(self, other: I) -> bool
where I: IntoIterator, Self::Item: PartialOrd<<I as IntoIterator>::Item>, Self: Sized,

Determines if the elements of this Iterator are lexicographically less than those of another. Read more
1.5.0 · source§

fn le<I>(self, other: I) -> bool
where I: IntoIterator, Self::Item: PartialOrd<<I as IntoIterator>::Item>, Self: Sized,

Determines if the elements of this Iterator are lexicographically less or equal to those of another. Read more
1.5.0 · source§

fn gt<I>(self, other: I) -> bool
where I: IntoIterator, Self::Item: PartialOrd<<I as IntoIterator>::Item>, Self: Sized,

Determines if the elements of this Iterator are lexicographically greater than those of another. Read more
1.5.0 · source§

fn ge<I>(self, other: I) -> bool
where I: IntoIterator, Self::Item: PartialOrd<<I as IntoIterator>::Item>, Self: Sized,

Determines if the elements of this Iterator are lexicographically greater than or equal to those of another. Read more
source§

fn is_sorted_by<F>(self, compare: F) -> bool
where Self: Sized, F: FnMut(&Self::Item, &Self::Item) -> bool,

🔬This is a nightly-only experimental API. (is_sorted)
Checks if the elements of this iterator are sorted using the given comparator function. Read more
source§

fn is_sorted_by_key<F, K>(self, f: F) -> bool
where Self: Sized, F: FnMut(Self::Item) -> K, K: PartialOrd,

🔬This is a nightly-only experimental API. (is_sorted)
Checks if the elements of this iterator are sorted using the given key extraction function. Read more
source§

impl<T> FusedIterator for RawIterRange<T>

source§

impl<T> Send for RawIterRange<T>

source§

impl<T> Sync for RawIterRange<T>

Auto Trait Implementations§

§

impl<T> Freeze for RawIterRange<T>

§

impl<T> RefUnwindSafe for RawIterRange<T>
where T: RefUnwindSafe,

§

impl<T> Unpin for RawIterRange<T>

§

impl<T> UnwindSafe for RawIterRange<T>
where T: RefUnwindSafe,

Blanket Implementations§

source§

impl<T> Any for T
where T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
source§

impl<T> Borrow<T> for T
where T: ?Sized,

source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
source§

impl<T> From<T> for T

source§

fn from(t: T) -> T

Returns the argument unchanged.

source§

impl<T, U> Into<U> for T
where U: From<T>,

source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source§

impl<I> IntoIterator for I
where I: Iterator,

§

type Item = <I as Iterator>::Item

The type of the elements being iterated over.
§

type IntoIter = I

Which kind of iterator are we turning this into?
source§

fn into_iter(self) -> I

Creates an iterator from a value. Read more
source§

impl<T> ToOwned for T
where T: Clone,

§

type Owned = T

The resulting type after obtaining ownership.
source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

§

type Error = Infallible

The type returned in the event of a conversion error.
source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.