pub struct ClientDisconnectFlags(u32);
Expand description

§Fields

  • Default - The default behavior for regular clients: the X11 server won’t terminate as long as such clients are still connected, and should this client disconnect, the server will continue running so long as other clients (that have not set XFixesClientDisconnectFlagTerminate) are connected.
  • Terminate - Indicates to the X11 server that it can ignore the client and terminate itself even though the client is still connected to the X11 server.

Tuple Fields§

§0: u32

Implementations§

source§

impl ClientDisconnectFlags

source

pub const DEFAULT: Self = _

source

pub const TERMINATE: Self = _

source§

impl ClientDisconnectFlags

source

pub fn contains(self, flag: impl Into<u32>) -> bool

Check if this object has all bits set that are also set in flag.

flag can be a single enum variant or a whole other mask.

source

pub fn intersects(self, flag: impl Into<u32>) -> bool

Check if this object has some bits set that are also set in flag.

flag can be a single enum variant or a whole other mask.

source

pub fn remove(self, flags: impl Into<u32>) -> Self

Remove some flags.

All bits that are set in the given flags are removed from the self instance, if they are present.

source

pub fn bits(self) -> u32

Returns the internal value of the object.

Trait Implementations§

source§

impl BitAnd<ClientDisconnectFlags> for u32

§

type Output = ClientDisconnectFlags

The resulting type after applying the & operator.
source§

fn bitand(self, other: ClientDisconnectFlags) -> Self::Output

Performs the & operation. Read more
source§

impl BitAnd<u32> for ClientDisconnectFlags

§

type Output = ClientDisconnectFlags

The resulting type after applying the & operator.
source§

fn bitand(self, other: u32) -> Self::Output

Performs the & operation. Read more
source§

impl BitAnd for ClientDisconnectFlags

§

type Output = ClientDisconnectFlags

The resulting type after applying the & operator.
source§

fn bitand(self, other: Self) -> Self::Output

Performs the & operation. Read more
source§

impl BitAndAssign<ClientDisconnectFlags> for u32

source§

fn bitand_assign(&mut self, other: ClientDisconnectFlags)

Performs the &= operation. Read more
source§

impl BitAndAssign<u32> for ClientDisconnectFlags

source§

fn bitand_assign(&mut self, other: u32)

Performs the &= operation. Read more
source§

impl BitAndAssign for ClientDisconnectFlags

source§

fn bitand_assign(&mut self, other: ClientDisconnectFlags)

Performs the &= operation. Read more
source§

impl BitOr<ClientDisconnectFlags> for u32

§

type Output = ClientDisconnectFlags

The resulting type after applying the | operator.
source§

fn bitor(self, other: ClientDisconnectFlags) -> Self::Output

Performs the | operation. Read more
source§

impl BitOr<u32> for ClientDisconnectFlags

§

type Output = ClientDisconnectFlags

The resulting type after applying the | operator.
source§

fn bitor(self, other: u32) -> Self::Output

Performs the | operation. Read more
source§

impl BitOr for ClientDisconnectFlags

§

type Output = ClientDisconnectFlags

The resulting type after applying the | operator.
source§

fn bitor(self, other: Self) -> Self::Output

Performs the | operation. Read more
source§

impl BitOrAssign<ClientDisconnectFlags> for u32

source§

fn bitor_assign(&mut self, other: ClientDisconnectFlags)

Performs the |= operation. Read more
source§

impl BitOrAssign<u32> for ClientDisconnectFlags

source§

fn bitor_assign(&mut self, other: u32)

Performs the |= operation. Read more
source§

impl BitOrAssign for ClientDisconnectFlags

source§

fn bitor_assign(&mut self, other: ClientDisconnectFlags)

Performs the |= operation. Read more
source§

impl Clone for ClientDisconnectFlags

source§

fn clone(&self) -> ClientDisconnectFlags

Returns a copy of the value. Read more
1.0.0 · source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
source§

impl Debug for ClientDisconnectFlags

source§

fn fmt(&self, fmt: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
source§

impl Default for ClientDisconnectFlags

source§

fn default() -> ClientDisconnectFlags

Returns the “default value” for a type. Read more
source§

impl From<ClientDisconnectFlags> for Option<u32>

source§

fn from(input: ClientDisconnectFlags) -> Self

Converts to this type from the input type.
source§

impl From<ClientDisconnectFlags> for u32

source§

fn from(input: ClientDisconnectFlags) -> Self

Converts to this type from the input type.
source§

impl From<u16> for ClientDisconnectFlags

source§

fn from(value: u16) -> Self

Converts to this type from the input type.
source§

impl From<u32> for ClientDisconnectFlags

source§

fn from(value: u32) -> Self

Converts to this type from the input type.
source§

impl From<u8> for ClientDisconnectFlags

source§

fn from(value: u8) -> Self

Converts to this type from the input type.
source§

impl Hash for ClientDisconnectFlags

source§

fn hash<__H: Hasher>(&self, state: &mut __H)

Feeds this value into the given Hasher. Read more
1.3.0 · source§

fn hash_slice<H>(data: &[Self], state: &mut H)
where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher. Read more
source§

impl Ord for ClientDisconnectFlags

source§

fn cmp(&self, other: &ClientDisconnectFlags) -> Ordering

This method returns an Ordering between self and other. Read more
1.21.0 · source§

fn max(self, other: Self) -> Self
where Self: Sized,

Compares and returns the maximum of two values. Read more
1.21.0 · source§

fn min(self, other: Self) -> Self
where Self: Sized,

Compares and returns the minimum of two values. Read more
1.50.0 · source§

fn clamp(self, min: Self, max: Self) -> Self
where Self: Sized + PartialOrd,

Restrict a value to a certain interval. Read more
source§

impl PartialEq for ClientDisconnectFlags

source§

fn eq(&self, other: &ClientDisconnectFlags) -> bool

This method tests for self and other values to be equal, and is used by ==.
1.0.0 · source§

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
source§

impl PartialOrd for ClientDisconnectFlags

source§

fn partial_cmp(&self, other: &ClientDisconnectFlags) -> Option<Ordering>

This method returns an ordering between self and other values if one exists. Read more
1.0.0 · source§

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator. Read more
1.0.0 · source§

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more
1.0.0 · source§

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator. Read more
1.0.0 · source§

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more
source§

impl Copy for ClientDisconnectFlags

source§

impl Eq for ClientDisconnectFlags

source§

impl StructuralPartialEq for ClientDisconnectFlags

Auto Trait Implementations§

Blanket Implementations§

source§

impl<T> Any for T
where T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
source§

impl<T> Borrow<T> for T
where T: ?Sized,

source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
source§

impl<T> From<T> for T

source§

fn from(t: T) -> T

Returns the argument unchanged.

source§

impl<T, U> Into<U> for T
where U: From<T>,

source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source§

impl<T> ToOwned for T
where T: Clone,

§

type Owned = T

The resulting type after obtaining ownership.
source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

§

type Error = Infallible

The type returned in the event of a conversion error.
source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.