Struct wgpu_types::Limits

#[repr(C)]
pub struct Limits {

    pub max_texture_dimension_1d: u32,
    pub max_texture_dimension_2d: u32,
    pub max_texture_dimension_3d: u32,
    pub max_texture_array_layers: u32,
    pub max_bind_groups: u32,
    pub max_bindings_per_bind_group: u32,
    pub max_dynamic_uniform_buffers_per_pipeline_layout: u32,
    pub max_dynamic_storage_buffers_per_pipeline_layout: u32,
    pub max_sampled_textures_per_shader_stage: u32,
    pub max_samplers_per_shader_stage: u32,
    pub max_storage_buffers_per_shader_stage: u32,
    pub max_storage_textures_per_shader_stage: u32,
    pub max_uniform_buffers_per_shader_stage: u32,
    pub max_uniform_buffer_binding_size: u32,
    pub max_storage_buffer_binding_size: u32,
    pub max_vertex_buffers: u32,
    pub max_buffer_size: u64,
    pub max_vertex_attributes: u32,
    pub max_vertex_buffer_array_stride: u32,
    pub min_uniform_buffer_offset_alignment: u32,
    pub min_storage_buffer_offset_alignment: u32,
    pub max_inter_stage_shader_components: u32,
    pub max_color_attachments: u32,
    pub max_color_attachment_bytes_per_sample: u32,
    pub max_compute_workgroup_storage_size: u32,
    pub max_compute_invocations_per_workgroup: u32,
    pub max_compute_workgroup_size_x: u32,
    pub max_compute_workgroup_size_y: u32,
    pub max_compute_workgroup_size_z: u32,
    pub max_compute_workgroups_per_dimension: u32,
    pub min_subgroup_size: u32,
    pub max_subgroup_size: u32,
    pub max_push_constant_size: u32,
    pub max_non_sampler_bindings: u32,
}

Represents the sets of limits an adapter/device supports.

We provide three different defaults.

• Limits::downlevel_defaults(). This is a set of limits that is guaranteed to work on almost all backends, including “downlevel” backends such as OpenGL and D3D11, other than WebGL. For most applications we recommend using these limits, assuming they are high enough for your application, and you do not intent to support WebGL.
• Limits::downlevel_webgl2_defaults() This is a set of limits that is lower even than the downlevel_defaults(), configured to be low enough to support running in the browser using WebGL2.
• Limits::default(). This is the set of limits that is guaranteed to work on all modern backends and is guaranteed to be supported by WebGPU. Applications needing more modern features can use this as a reasonable set of limits if they are targeting only desktop and modern mobile devices.

We recommend starting with the most restrictive limits you can and manually increasing the limits you need boosted. This will let you stay running on all hardware that supports the limits you need.

Limits “better” than the default must be supported by the adapter and requested when requesting a device. If limits “better” than the adapter supports are requested, requesting a device will panic. Once a device is requested, you may only use resources up to the limits requested even if the adapter supports “better” limits.

Requesting limits that are “better” than you need may cause performance to decrease because the implementation needs to support more than is needed. You should ideally only request exactly what you need.

Corresponds to WebGPU GPUSupportedLimits.

Fields

max_texture_dimension_1d: u32

Maximum allowed value for the size.width of a texture created with TextureDimension::D1. Defaults to 8192. Higher is “better”.

max_texture_dimension_2d: u32

Maximum allowed value for the size.width and size.height of a texture created with TextureDimension::D2. Defaults to 8192. Higher is “better”.

max_texture_dimension_3d: u32

Maximum allowed value for the size.width, size.height, and size.depth_or_array_layers of a texture created with TextureDimension::D3. Defaults to 2048. Higher is “better”.

max_texture_array_layers: u32

Maximum allowed value for the size.depth_or_array_layers of a texture created with TextureDimension::D2. Defaults to 256. Higher is “better”.

max_bind_groups: u32

Amount of bind groups that can be attached to a pipeline at the same time. Defaults to 4. Higher is “better”.

max_bindings_per_bind_group: u32

Maximum binding index allowed in create_bind_group_layout. Defaults to 1000. Higher is “better”.

max_dynamic_uniform_buffers_per_pipeline_layout: u32

Amount of uniform buffer bindings that can be dynamic in a single pipeline. Defaults to 8. Higher is “better”.

max_dynamic_storage_buffers_per_pipeline_layout: u32

Amount of storage buffer bindings that can be dynamic in a single pipeline. Defaults to 4. Higher is “better”.

max_sampled_textures_per_shader_stage: u32

Amount of sampled textures visible in a single shader stage. Defaults to 16. Higher is “better”.

max_samplers_per_shader_stage: u32

Amount of samplers visible in a single shader stage. Defaults to 16. Higher is “better”.

max_storage_buffers_per_shader_stage: u32

Amount of storage buffers visible in a single shader stage. Defaults to 8. Higher is “better”.

max_storage_textures_per_shader_stage: u32

Amount of storage textures visible in a single shader stage. Defaults to 4. Higher is “better”.

max_uniform_buffers_per_shader_stage: u32

Amount of uniform buffers visible in a single shader stage. Defaults to 12. Higher is “better”.

max_uniform_buffer_binding_size: u32

Maximum size in bytes of a binding to a uniform buffer. Defaults to 64 KiB. Higher is “better”.

max_storage_buffer_binding_size: u32

Maximum size in bytes of a binding to a storage buffer. Defaults to 128 MiB. Higher is “better”.

max_vertex_buffers: u32

Maximum length of VertexState::buffers when creating a RenderPipeline. Defaults to 8. Higher is “better”.

max_buffer_size: u64

A limit above which buffer allocations are guaranteed to fail. Defaults to 256 MiB. Higher is “better”.

Buffer allocations below the maximum buffer size may not succeed depending on available memory, fragmentation and other factors.

max_vertex_attributes: u32

Maximum length of VertexBufferLayout::attributes, summed over all VertexState::buffers, when creating a RenderPipeline. Defaults to 16. Higher is “better”.

max_vertex_buffer_array_stride: u32

Maximum value for VertexBufferLayout::array_stride when creating a RenderPipeline. Defaults to 2048. Higher is “better”.

min_uniform_buffer_offset_alignment: u32

Required BufferBindingType::Uniform alignment for BufferBinding::offset when creating a BindGroup, or for set_bind_group dynamicOffsets. Defaults to 256. Lower is “better”.

min_storage_buffer_offset_alignment: u32

Required BufferBindingType::Storage alignment for BufferBinding::offset when creating a BindGroup, or for set_bind_group dynamicOffsets. Defaults to 256. Lower is “better”.

max_inter_stage_shader_components: u32

Maximum allowed number of components (scalars) of input or output locations for inter-stage communication (vertex outputs to fragment inputs). Defaults to 60. Higher is “better”.

max_color_attachments: u32

The maximum allowed number of color attachments.

max_color_attachment_bytes_per_sample: u32

The maximum number of bytes necessary to hold one sample (pixel or subpixel) of render pipeline output data, across all color attachments.

max_compute_workgroup_storage_size: u32

Maximum number of bytes used for workgroup memory in a compute entry point. Defaults to 16384. Higher is “better”.

max_compute_invocations_per_workgroup: u32

Maximum value of the product of the workgroup_size dimensions for a compute entry-point. Defaults to 256. Higher is “better”.

max_compute_workgroup_size_x: u32

The maximum value of the workgroup_size X dimension for a compute stage ShaderModule entry-point. Defaults to 256. Higher is “better”.

max_compute_workgroup_size_y: u32

The maximum value of the workgroup_size Y dimension for a compute stage ShaderModule entry-point. Defaults to 256. Higher is “better”.

max_compute_workgroup_size_z: u32

The maximum value of the workgroup_size Z dimension for a compute stage ShaderModule entry-point. Defaults to 64. Higher is “better”.

max_compute_workgroups_per_dimension: u32

The maximum value for each dimension of a ComputePass::dispatch(x, y, z) operation. Defaults to 65535. Higher is “better”.

min_subgroup_size: u32

Minimal number of invocations in a subgroup. Higher is “better”.

max_subgroup_size: u32

Maximal number of invocations in a subgroup. Lower is “better”.

max_push_constant_size: u32

Amount of storage available for push constants in bytes. Defaults to 0. Higher is “better”. Requesting more than 0 during device creation requires Features::PUSH_CONSTANTS to be enabled.

Expect the size to be:

• Vulkan: 128-256 bytes
• DX12: 256 bytes
• Metal: 4096 bytes
• OpenGL doesn’t natively support push constants, and are emulated with uniforms, so this number is less useful but likely 256.

max_non_sampler_bindings: u32

Maximum number of live non-sampler bindings.

This limit only affects the d3d12 backend. Using a large number will allow the device to create many bind groups at the cost of a large up-front allocation at device creation.

Implementations

impl Limits

pub(crate) const fn defaults() -> Self

pub const fn downlevel_defaults() -> Self

These default limits are guaranteed to be compatible with GLES-3.1, and D3D11

Those limits are as follows (different from default are marked with *):

assert_eq!(Limits::downlevel_defaults(), Limits {
    max_texture_dimension_1d: 2048, // *
    max_texture_dimension_2d: 2048, // *
    max_texture_dimension_3d: 256, // *
    max_texture_array_layers: 256,
    max_bind_groups: 4,
    max_bindings_per_bind_group: 1000,
    max_dynamic_uniform_buffers_per_pipeline_layout: 8,
    max_dynamic_storage_buffers_per_pipeline_layout: 4,
    max_sampled_textures_per_shader_stage: 16,
    max_samplers_per_shader_stage: 16,
    max_storage_buffers_per_shader_stage: 4, // *
    max_storage_textures_per_shader_stage: 4,
    max_uniform_buffers_per_shader_stage: 12,
    max_uniform_buffer_binding_size: 16 << 10, // * (16 KiB)
    max_storage_buffer_binding_size: 128 << 20, // (128 MiB)
    max_vertex_buffers: 8,
    max_vertex_attributes: 16,
    max_vertex_buffer_array_stride: 2048,
    min_subgroup_size: 0,
    max_subgroup_size: 0,
    max_push_constant_size: 0,
    min_uniform_buffer_offset_alignment: 256,
    min_storage_buffer_offset_alignment: 256,
    max_inter_stage_shader_components: 60,
    max_color_attachments: 8,
    max_color_attachment_bytes_per_sample: 32,
    max_compute_workgroup_storage_size: 16352, // *
    max_compute_invocations_per_workgroup: 256,
    max_compute_workgroup_size_x: 256,
    max_compute_workgroup_size_y: 256,
    max_compute_workgroup_size_z: 64,
    max_compute_workgroups_per_dimension: 65535,
    max_buffer_size: 256 << 20, // (256 MiB)
    max_non_sampler_bindings: 1_000_000,
});

pub const fn downlevel_webgl2_defaults() -> Self

These default limits are guaranteed to be compatible with GLES-3.0, and D3D11, and WebGL2

Those limits are as follows (different from downlevel_defaults are marked with +, *’s from downlevel_defaults shown as well.):

assert_eq!(Limits::downlevel_webgl2_defaults(), Limits {
    max_texture_dimension_1d: 2048, // *
    max_texture_dimension_2d: 2048, // *
    max_texture_dimension_3d: 256, // *
    max_texture_array_layers: 256,
    max_bind_groups: 4,
    max_bindings_per_bind_group: 1000,
    max_dynamic_uniform_buffers_per_pipeline_layout: 8,
    max_dynamic_storage_buffers_per_pipeline_layout: 0, // +
    max_sampled_textures_per_shader_stage: 16,
    max_samplers_per_shader_stage: 16,
    max_storage_buffers_per_shader_stage: 0, // * +
    max_storage_textures_per_shader_stage: 0, // +
    max_uniform_buffers_per_shader_stage: 11, // +
    max_uniform_buffer_binding_size: 16 << 10, // * (16 KiB)
    max_storage_buffer_binding_size: 0, // * +
    max_vertex_buffers: 8,
    max_vertex_attributes: 16,
    max_vertex_buffer_array_stride: 255, // +
    min_subgroup_size: 0,
    max_subgroup_size: 0,
    max_push_constant_size: 0,
    min_uniform_buffer_offset_alignment: 256,
    min_storage_buffer_offset_alignment: 256,
    max_inter_stage_shader_components: 31,
    max_color_attachments: 8,
    max_color_attachment_bytes_per_sample: 32,
    max_compute_workgroup_storage_size: 0, // +
    max_compute_invocations_per_workgroup: 0, // +
    max_compute_workgroup_size_x: 0, // +
    max_compute_workgroup_size_y: 0, // +
    max_compute_workgroup_size_z: 0, // +
    max_compute_workgroups_per_dimension: 0, // +
    max_buffer_size: 256 << 20, // (256 MiB),
    max_non_sampler_bindings: 1_000_000,
});

pub const fn using_resolution(self, other: Self) -> Self

Modify the current limits to use the resolution limits of the other.

This is useful because the swapchain might need to be larger than any other image in the application.

If your application only needs 512x512, you might be running on a 4k display and need extremely high resolution limits.

pub const fn using_alignment(self, other: Self) -> Self

Modify the current limits to use the buffer alignment limits of the adapter.

This is useful for when you’d like to dynamically use the “best” supported buffer alignments.

pub fn check_limits(&self, allowed: &Self) -> bool

Compares every limits within self is within the limits given in allowed.

If you need detailed information on failures, look at Limits::check_limits_with_fail_fn.

pub fn check_limits_with_fail_fn( &self, allowed: &Self, fatal: bool, fail_fn: impl FnMut(&'static str, u64, u64), )

Compares every limits within self is within the limits given in allowed. For an easy to use binary choice, use Limits::check_limits.

If a value is not within the allowed limit, this function calls the fail_fn with the:

• limit name
• self’s limit
• allowed’s limit.

If fatal is true, a single failure bails out the comparison after a single failure.

Trait Implementations

impl Clone for Limits

fn clone(&self) -> Limits

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for Limits

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Default for Limits

fn default() -> Self

Returns the “default value” for a type.

impl<'de> Deserialize<'de> for Limits

where Limits: Default,

fn deserialize<__D>(__deserializer: __D) -> Result<Self, __D::Error>

where __D: Deserializer<'de>,

Deserialize this value from the given Serde deserializer.

impl Hash for Limits

fn hash<__H: Hasher>(&self, state: &mut __H)

Feeds this value into the given Hasher.

fn hash_slice<H>(data: &[Self], state: &mut H)

where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher.

impl PartialEq for Limits

fn eq(&self, other: &Limits) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Serialize for Limits

fn serialize<__S>(&self, __serializer: __S) -> Result<__S::Ok, __S::Error>

where __S: Serializer,

Serialize this value into the given Serde serializer.

impl Eq for Limits

impl StructuralPartialEq for Limits