Struct tracing::stdlib::num::Wrapping

#[repr(transparent)]
pub struct Wrapping<T>(pub T);

Provides intentionally-wrapped arithmetic on T.

Operations like + on u32 values are intended to never overflow, and in some debug configurations overflow is detected and results in a panic. While most arithmetic falls into this category, some code explicitly expects and relies upon modular arithmetic (e.g., hashing).

Wrapping arithmetic can be achieved either through methods like wrapping_add, or through the Wrapping<T> type, which says that all standard arithmetic operations on the underlying value are intended to have wrapping semantics.

The underlying value can be retrieved through the .0 index of the Wrapping tuple.

Examples

use std::num::Wrapping;

let zero = Wrapping(0u32);
let one = Wrapping(1u32);

assert_eq!(u32::MAX, (zero - one).0);

Layout

Wrapping<T> is guaranteed to have the same layout and ABI as T.

Tuple Fields

0: T

Implementations

impl Wrapping<usize>

pub const MIN: Wrapping<usize> = _

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the smallest value that can be represented by this integer type.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(<Wrapping<usize>>::MIN, Wrapping(usize::MIN));

pub const MAX: Wrapping<usize> = _

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the largest value that can be represented by this integer type.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(<Wrapping<usize>>::MAX, Wrapping(usize::MAX));

pub const BITS: u32 = 64u32

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the size of this integer type in bits.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(<Wrapping<usize>>::BITS, usize::BITS);

pub const fn count_ones(self) -> u32

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of ones in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0b01001100usize);

assert_eq!(n.count_ones(), 3);

pub const fn count_zeros(self) -> u32

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(!0usize).count_zeros(), 0);

pub const fn trailing_zeros(self) -> u32

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of trailing zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0b0101000usize);

assert_eq!(n.trailing_zeros(), 3);

pub const fn rotate_left(self, n: u32) -> Wrapping<usize>

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Shifts the bits to the left by a specified amount, n, wrapping the truncated bits to the end of the resulting integer.

Please note this isn’t the same operation as the << shifting operator!

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);
let m: Wrapping<i64> = Wrapping(-0x76543210FEDCBA99);

assert_eq!(n.rotate_left(32), m);

pub const fn rotate_right(self, n: u32) -> Wrapping<usize>

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Shifts the bits to the right by a specified amount, n, wrapping the truncated bits to the beginning of the resulting integer.

Please note this isn’t the same operation as the >> shifting operator!

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);
let m: Wrapping<i64> = Wrapping(-0xFEDCBA987654322);

assert_eq!(n.rotate_right(4), m);

pub const fn swap_bytes(self) -> Wrapping<usize>

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Reverses the byte order of the integer.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i16> = Wrapping(0b0000000_01010101);
assert_eq!(n, Wrapping(85));

let m = n.swap_bytes();

assert_eq!(m, Wrapping(0b01010101_00000000));
assert_eq!(m, Wrapping(21760));

pub const fn reverse_bits(self) -> Wrapping<usize>

Reverses the bit pattern of the integer.

Examples

Please note that this example is shared between integer types. Which explains why i16 is used here.

Basic usage:

use std::num::Wrapping;

let n = Wrapping(0b0000000_01010101i16);
assert_eq!(n, Wrapping(85));

let m = n.reverse_bits();

assert_eq!(m.0 as u16, 0b10101010_00000000);
assert_eq!(m, Wrapping(-22016));

pub const fn from_be(x: Wrapping<usize>) -> Wrapping<usize>

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts an integer from big endian to the target’s endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Ausize);

if cfg!(target_endian = "big") {
    assert_eq!(<Wrapping<usize>>::from_be(n), n)
} else {
    assert_eq!(<Wrapping<usize>>::from_be(n), n.swap_bytes())
}

pub const fn from_le(x: Wrapping<usize>) -> Wrapping<usize>

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts an integer from little endian to the target’s endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Ausize);

if cfg!(target_endian = "little") {
    assert_eq!(<Wrapping<usize>>::from_le(n), n)
} else {
    assert_eq!(<Wrapping<usize>>::from_le(n), n.swap_bytes())
}

pub const fn to_be(self) -> Wrapping<usize>

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts self to big endian from the target’s endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Ausize);

if cfg!(target_endian = "big") {
    assert_eq!(n.to_be(), n)
} else {
    assert_eq!(n.to_be(), n.swap_bytes())
}

pub const fn to_le(self) -> Wrapping<usize>

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts self to little endian from the target’s endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Ausize);

if cfg!(target_endian = "little") {
    assert_eq!(n.to_le(), n)
} else {
    assert_eq!(n.to_le(), n.swap_bytes())
}

pub fn pow(self, exp: u32) -> Wrapping<usize>

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Raises self to the power of exp, using exponentiation by squaring.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(3usize).pow(4), Wrapping(81));

Results that are too large are wrapped:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(3i8).pow(5), Wrapping(-13));
assert_eq!(Wrapping(3i8).pow(6), Wrapping(-39));

impl Wrapping<u8>

pub const MIN: Wrapping<u8> = _

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the smallest value that can be represented by this integer type.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(<Wrapping<u8>>::MIN, Wrapping(u8::MIN));

pub const MAX: Wrapping<u8> = _

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the largest value that can be represented by this integer type.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(<Wrapping<u8>>::MAX, Wrapping(u8::MAX));

pub const BITS: u32 = 8u32

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the size of this integer type in bits.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(<Wrapping<u8>>::BITS, u8::BITS);

pub const fn count_ones(self) -> u32

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of ones in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0b01001100u8);

assert_eq!(n.count_ones(), 3);

pub const fn count_zeros(self) -> u32

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(!0u8).count_zeros(), 0);

pub const fn trailing_zeros(self) -> u32

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of trailing zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0b0101000u8);

assert_eq!(n.trailing_zeros(), 3);

pub const fn rotate_left(self, n: u32) -> Wrapping<u8>

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Shifts the bits to the left by a specified amount, n, wrapping the truncated bits to the end of the resulting integer.

Please note this isn’t the same operation as the << shifting operator!

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);
let m: Wrapping<i64> = Wrapping(-0x76543210FEDCBA99);

assert_eq!(n.rotate_left(32), m);

pub const fn rotate_right(self, n: u32) -> Wrapping<u8>

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Shifts the bits to the right by a specified amount, n, wrapping the truncated bits to the beginning of the resulting integer.

Please note this isn’t the same operation as the >> shifting operator!

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);
let m: Wrapping<i64> = Wrapping(-0xFEDCBA987654322);

assert_eq!(n.rotate_right(4), m);

pub const fn swap_bytes(self) -> Wrapping<u8>

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Reverses the byte order of the integer.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i16> = Wrapping(0b0000000_01010101);
assert_eq!(n, Wrapping(85));

let m = n.swap_bytes();

assert_eq!(m, Wrapping(0b01010101_00000000));
assert_eq!(m, Wrapping(21760));

pub const fn reverse_bits(self) -> Wrapping<u8>

Reverses the bit pattern of the integer.

Examples

Please note that this example is shared between integer types. Which explains why i16 is used here.

Basic usage:

use std::num::Wrapping;

let n = Wrapping(0b0000000_01010101i16);
assert_eq!(n, Wrapping(85));

let m = n.reverse_bits();

assert_eq!(m.0 as u16, 0b10101010_00000000);
assert_eq!(m, Wrapping(-22016));

pub const fn from_be(x: Wrapping<u8>) -> Wrapping<u8>

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts an integer from big endian to the target’s endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Au8);

if cfg!(target_endian = "big") {
    assert_eq!(<Wrapping<u8>>::from_be(n), n)
} else {
    assert_eq!(<Wrapping<u8>>::from_be(n), n.swap_bytes())
}

pub const fn from_le(x: Wrapping<u8>) -> Wrapping<u8>

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts an integer from little endian to the target’s endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Au8);

if cfg!(target_endian = "little") {
    assert_eq!(<Wrapping<u8>>::from_le(n), n)
} else {
    assert_eq!(<Wrapping<u8>>::from_le(n), n.swap_bytes())
}

pub const fn to_be(self) -> Wrapping<u8>

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts self to big endian from the target’s endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Au8);

if cfg!(target_endian = "big") {
    assert_eq!(n.to_be(), n)
} else {
    assert_eq!(n.to_be(), n.swap_bytes())
}

pub const fn to_le(self) -> Wrapping<u8>

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts self to little endian from the target’s endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Au8);

if cfg!(target_endian = "little") {
    assert_eq!(n.to_le(), n)
} else {
    assert_eq!(n.to_le(), n.swap_bytes())
}

pub fn pow(self, exp: u32) -> Wrapping<u8>

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Raises self to the power of exp, using exponentiation by squaring.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(3u8).pow(4), Wrapping(81));

Results that are too large are wrapped:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(3i8).pow(5), Wrapping(-13));
assert_eq!(Wrapping(3i8).pow(6), Wrapping(-39));

impl Wrapping<u16>

pub const MIN: Wrapping<u16> = _

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the smallest value that can be represented by this integer type.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(<Wrapping<u16>>::MIN, Wrapping(u16::MIN));

pub const MAX: Wrapping<u16> = _

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the largest value that can be represented by this integer type.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(<Wrapping<u16>>::MAX, Wrapping(u16::MAX));

pub const BITS: u32 = 16u32

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the size of this integer type in bits.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(<Wrapping<u16>>::BITS, u16::BITS);

pub const fn count_ones(self) -> u32

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of ones in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0b01001100u16);

assert_eq!(n.count_ones(), 3);

pub const fn count_zeros(self) -> u32

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(!0u16).count_zeros(), 0);

pub const fn trailing_zeros(self) -> u32

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of trailing zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0b0101000u16);

assert_eq!(n.trailing_zeros(), 3);

pub const fn rotate_left(self, n: u32) -> Wrapping<u16>

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Shifts the bits to the left by a specified amount, n, wrapping the truncated bits to the end of the resulting integer.

Please note this isn’t the same operation as the << shifting operator!

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);
let m: Wrapping<i64> = Wrapping(-0x76543210FEDCBA99);

assert_eq!(n.rotate_left(32), m);

pub const fn rotate_right(self, n: u32) -> Wrapping<u16>

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Shifts the bits to the right by a specified amount, n, wrapping the truncated bits to the beginning of the resulting integer.

Please note this isn’t the same operation as the >> shifting operator!

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);
let m: Wrapping<i64> = Wrapping(-0xFEDCBA987654322);

assert_eq!(n.rotate_right(4), m);

pub const fn swap_bytes(self) -> Wrapping<u16>

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Reverses the byte order of the integer.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i16> = Wrapping(0b0000000_01010101);
assert_eq!(n, Wrapping(85));

let m = n.swap_bytes();

assert_eq!(m, Wrapping(0b01010101_00000000));
assert_eq!(m, Wrapping(21760));

pub const fn reverse_bits(self) -> Wrapping<u16>

Reverses the bit pattern of the integer.

Examples

Please note that this example is shared between integer types. Which explains why i16 is used here.

Basic usage:

use std::num::Wrapping;

let n = Wrapping(0b0000000_01010101i16);
assert_eq!(n, Wrapping(85));

let m = n.reverse_bits();

assert_eq!(m.0 as u16, 0b10101010_00000000);
assert_eq!(m, Wrapping(-22016));

pub const fn from_be(x: Wrapping<u16>) -> Wrapping<u16>

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts an integer from big endian to the target’s endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Au16);

if cfg!(target_endian = "big") {
    assert_eq!(<Wrapping<u16>>::from_be(n), n)
} else {
    assert_eq!(<Wrapping<u16>>::from_be(n), n.swap_bytes())
}

pub const fn from_le(x: Wrapping<u16>) -> Wrapping<u16>

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts an integer from little endian to the target’s endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Au16);

if cfg!(target_endian = "little") {
    assert_eq!(<Wrapping<u16>>::from_le(n), n)
} else {
    assert_eq!(<Wrapping<u16>>::from_le(n), n.swap_bytes())
}

pub const fn to_be(self) -> Wrapping<u16>

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts self to big endian from the target’s endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Au16);

if cfg!(target_endian = "big") {
    assert_eq!(n.to_be(), n)
} else {
    assert_eq!(n.to_be(), n.swap_bytes())
}

pub const fn to_le(self) -> Wrapping<u16>

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts self to little endian from the target’s endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Au16);

if cfg!(target_endian = "little") {
    assert_eq!(n.to_le(), n)
} else {
    assert_eq!(n.to_le(), n.swap_bytes())
}

pub fn pow(self, exp: u32) -> Wrapping<u16>

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Raises self to the power of exp, using exponentiation by squaring.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(3u16).pow(4), Wrapping(81));

Results that are too large are wrapped:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(3i8).pow(5), Wrapping(-13));
assert_eq!(Wrapping(3i8).pow(6), Wrapping(-39));

impl Wrapping<u32>

pub const MIN: Wrapping<u32> = _

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the smallest value that can be represented by this integer type.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(<Wrapping<u32>>::MIN, Wrapping(u32::MIN));

pub const MAX: Wrapping<u32> = _

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the largest value that can be represented by this integer type.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(<Wrapping<u32>>::MAX, Wrapping(u32::MAX));

pub const BITS: u32 = 32u32

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the size of this integer type in bits.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(<Wrapping<u32>>::BITS, u32::BITS);

pub const fn count_ones(self) -> u32

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of ones in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0b01001100u32);

assert_eq!(n.count_ones(), 3);

pub const fn count_zeros(self) -> u32

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(!0u32).count_zeros(), 0);

pub const fn trailing_zeros(self) -> u32

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of trailing zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0b0101000u32);

assert_eq!(n.trailing_zeros(), 3);

pub const fn rotate_left(self, n: u32) -> Wrapping<u32>

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Shifts the bits to the left by a specified amount, n, wrapping the truncated bits to the end of the resulting integer.

Please note this isn’t the same operation as the << shifting operator!

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);
let m: Wrapping<i64> = Wrapping(-0x76543210FEDCBA99);

assert_eq!(n.rotate_left(32), m);

pub const fn rotate_right(self, n: u32) -> Wrapping<u32>

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Shifts the bits to the right by a specified amount, n, wrapping the truncated bits to the beginning of the resulting integer.

Please note this isn’t the same operation as the >> shifting operator!

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);
let m: Wrapping<i64> = Wrapping(-0xFEDCBA987654322);

assert_eq!(n.rotate_right(4), m);

pub const fn swap_bytes(self) -> Wrapping<u32>

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Reverses the byte order of the integer.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i16> = Wrapping(0b0000000_01010101);
assert_eq!(n, Wrapping(85));

let m = n.swap_bytes();

assert_eq!(m, Wrapping(0b01010101_00000000));
assert_eq!(m, Wrapping(21760));

pub const fn reverse_bits(self) -> Wrapping<u32>

Reverses the bit pattern of the integer.

Examples

Please note that this example is shared between integer types. Which explains why i16 is used here.

Basic usage:

use std::num::Wrapping;

let n = Wrapping(0b0000000_01010101i16);
assert_eq!(n, Wrapping(85));

let m = n.reverse_bits();

assert_eq!(m.0 as u16, 0b10101010_00000000);
assert_eq!(m, Wrapping(-22016));

pub const fn from_be(x: Wrapping<u32>) -> Wrapping<u32>

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts an integer from big endian to the target’s endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Au32);

if cfg!(target_endian = "big") {
    assert_eq!(<Wrapping<u32>>::from_be(n), n)
} else {
    assert_eq!(<Wrapping<u32>>::from_be(n), n.swap_bytes())
}

pub const fn from_le(x: Wrapping<u32>) -> Wrapping<u32>

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts an integer from little endian to the target’s endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Au32);

if cfg!(target_endian = "little") {
    assert_eq!(<Wrapping<u32>>::from_le(n), n)
} else {
    assert_eq!(<Wrapping<u32>>::from_le(n), n.swap_bytes())
}

pub const fn to_be(self) -> Wrapping<u32>

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts self to big endian from the target’s endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Au32);

if cfg!(target_endian = "big") {
    assert_eq!(n.to_be(), n)
} else {
    assert_eq!(n.to_be(), n.swap_bytes())
}

pub const fn to_le(self) -> Wrapping<u32>

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts self to little endian from the target’s endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Au32);

if cfg!(target_endian = "little") {
    assert_eq!(n.to_le(), n)
} else {
    assert_eq!(n.to_le(), n.swap_bytes())
}

pub fn pow(self, exp: u32) -> Wrapping<u32>

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Raises self to the power of exp, using exponentiation by squaring.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(3u32).pow(4), Wrapping(81));

Results that are too large are wrapped:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(3i8).pow(5), Wrapping(-13));
assert_eq!(Wrapping(3i8).pow(6), Wrapping(-39));

impl Wrapping<u64>

pub const MIN: Wrapping<u64> = _

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the smallest value that can be represented by this integer type.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(<Wrapping<u64>>::MIN, Wrapping(u64::MIN));

pub const MAX: Wrapping<u64> = _

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the largest value that can be represented by this integer type.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(<Wrapping<u64>>::MAX, Wrapping(u64::MAX));

pub const BITS: u32 = 64u32

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the size of this integer type in bits.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(<Wrapping<u64>>::BITS, u64::BITS);

pub const fn count_ones(self) -> u32

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of ones in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0b01001100u64);

assert_eq!(n.count_ones(), 3);

pub const fn count_zeros(self) -> u32

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(!0u64).count_zeros(), 0);

pub const fn trailing_zeros(self) -> u32

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of trailing zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0b0101000u64);

assert_eq!(n.trailing_zeros(), 3);

pub const fn rotate_left(self, n: u32) -> Wrapping<u64>

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Shifts the bits to the left by a specified amount, n, wrapping the truncated bits to the end of the resulting integer.

Please note this isn’t the same operation as the << shifting operator!

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);
let m: Wrapping<i64> = Wrapping(-0x76543210FEDCBA99);

assert_eq!(n.rotate_left(32), m);

pub const fn rotate_right(self, n: u32) -> Wrapping<u64>

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Shifts the bits to the right by a specified amount, n, wrapping the truncated bits to the beginning of the resulting integer.

Please note this isn’t the same operation as the >> shifting operator!

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);
let m: Wrapping<i64> = Wrapping(-0xFEDCBA987654322);

assert_eq!(n.rotate_right(4), m);

pub const fn swap_bytes(self) -> Wrapping<u64>

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Reverses the byte order of the integer.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i16> = Wrapping(0b0000000_01010101);
assert_eq!(n, Wrapping(85));

let m = n.swap_bytes();

assert_eq!(m, Wrapping(0b01010101_00000000));
assert_eq!(m, Wrapping(21760));

pub const fn reverse_bits(self) -> Wrapping<u64>

Reverses the bit pattern of the integer.

Examples

Please note that this example is shared between integer types. Which explains why i16 is used here.

Basic usage:

use std::num::Wrapping;

let n = Wrapping(0b0000000_01010101i16);
assert_eq!(n, Wrapping(85));

let m = n.reverse_bits();

assert_eq!(m.0 as u16, 0b10101010_00000000);
assert_eq!(m, Wrapping(-22016));

pub const fn from_be(x: Wrapping<u64>) -> Wrapping<u64>

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts an integer from big endian to the target’s endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Au64);

if cfg!(target_endian = "big") {
    assert_eq!(<Wrapping<u64>>::from_be(n), n)
} else {
    assert_eq!(<Wrapping<u64>>::from_be(n), n.swap_bytes())
}

pub const fn from_le(x: Wrapping<u64>) -> Wrapping<u64>

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts an integer from little endian to the target’s endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Au64);

if cfg!(target_endian = "little") {
    assert_eq!(<Wrapping<u64>>::from_le(n), n)
} else {
    assert_eq!(<Wrapping<u64>>::from_le(n), n.swap_bytes())
}

pub const fn to_be(self) -> Wrapping<u64>

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts self to big endian from the target’s endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Au64);

if cfg!(target_endian = "big") {
    assert_eq!(n.to_be(), n)
} else {
    assert_eq!(n.to_be(), n.swap_bytes())
}

pub const fn to_le(self) -> Wrapping<u64>

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts self to little endian from the target’s endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Au64);

if cfg!(target_endian = "little") {
    assert_eq!(n.to_le(), n)
} else {
    assert_eq!(n.to_le(), n.swap_bytes())
}

pub fn pow(self, exp: u32) -> Wrapping<u64>

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Raises self to the power of exp, using exponentiation by squaring.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(3u64).pow(4), Wrapping(81));

Results that are too large are wrapped:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(3i8).pow(5), Wrapping(-13));
assert_eq!(Wrapping(3i8).pow(6), Wrapping(-39));

impl Wrapping<u128>

pub const MIN: Wrapping<u128> = _

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the smallest value that can be represented by this integer type.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(<Wrapping<u128>>::MIN, Wrapping(u128::MIN));

pub const MAX: Wrapping<u128> = _

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the largest value that can be represented by this integer type.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(<Wrapping<u128>>::MAX, Wrapping(u128::MAX));

pub const BITS: u32 = 128u32

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the size of this integer type in bits.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(<Wrapping<u128>>::BITS, u128::BITS);

pub const fn count_ones(self) -> u32

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of ones in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0b01001100u128);

assert_eq!(n.count_ones(), 3);

pub const fn count_zeros(self) -> u32

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(!0u128).count_zeros(), 0);

pub const fn trailing_zeros(self) -> u32

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of trailing zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0b0101000u128);

assert_eq!(n.trailing_zeros(), 3);

pub const fn rotate_left(self, n: u32) -> Wrapping<u128>

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Shifts the bits to the left by a specified amount, n, wrapping the truncated bits to the end of the resulting integer.

Please note this isn’t the same operation as the << shifting operator!

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);
let m: Wrapping<i64> = Wrapping(-0x76543210FEDCBA99);

assert_eq!(n.rotate_left(32), m);

pub const fn rotate_right(self, n: u32) -> Wrapping<u128>

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Shifts the bits to the right by a specified amount, n, wrapping the truncated bits to the beginning of the resulting integer.

Please note this isn’t the same operation as the >> shifting operator!

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);
let m: Wrapping<i64> = Wrapping(-0xFEDCBA987654322);

assert_eq!(n.rotate_right(4), m);

pub const fn swap_bytes(self) -> Wrapping<u128>

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Reverses the byte order of the integer.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i16> = Wrapping(0b0000000_01010101);
assert_eq!(n, Wrapping(85));

let m = n.swap_bytes();

assert_eq!(m, Wrapping(0b01010101_00000000));
assert_eq!(m, Wrapping(21760));

pub const fn reverse_bits(self) -> Wrapping<u128>

Reverses the bit pattern of the integer.

Examples

Please note that this example is shared between integer types. Which explains why i16 is used here.

Basic usage:

use std::num::Wrapping;

let n = Wrapping(0b0000000_01010101i16);
assert_eq!(n, Wrapping(85));

let m = n.reverse_bits();

assert_eq!(m.0 as u16, 0b10101010_00000000);
assert_eq!(m, Wrapping(-22016));

pub const fn from_be(x: Wrapping<u128>) -> Wrapping<u128>

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts an integer from big endian to the target’s endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Au128);

if cfg!(target_endian = "big") {
    assert_eq!(<Wrapping<u128>>::from_be(n), n)
} else {
    assert_eq!(<Wrapping<u128>>::from_be(n), n.swap_bytes())
}

pub const fn from_le(x: Wrapping<u128>) -> Wrapping<u128>

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts an integer from little endian to the target’s endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Au128);

if cfg!(target_endian = "little") {
    assert_eq!(<Wrapping<u128>>::from_le(n), n)
} else {
    assert_eq!(<Wrapping<u128>>::from_le(n), n.swap_bytes())
}

pub const fn to_be(self) -> Wrapping<u128>

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts self to big endian from the target’s endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Au128);

if cfg!(target_endian = "big") {
    assert_eq!(n.to_be(), n)
} else {
    assert_eq!(n.to_be(), n.swap_bytes())
}

pub const fn to_le(self) -> Wrapping<u128>

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts self to little endian from the target’s endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Au128);

if cfg!(target_endian = "little") {
    assert_eq!(n.to_le(), n)
} else {
    assert_eq!(n.to_le(), n.swap_bytes())
}

pub fn pow(self, exp: u32) -> Wrapping<u128>

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Raises self to the power of exp, using exponentiation by squaring.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(3u128).pow(4), Wrapping(81));

Results that are too large are wrapped:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(3i8).pow(5), Wrapping(-13));
assert_eq!(Wrapping(3i8).pow(6), Wrapping(-39));

impl Wrapping<isize>

pub const MIN: Wrapping<isize> = _

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the smallest value that can be represented by this integer type.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(<Wrapping<isize>>::MIN, Wrapping(isize::MIN));

pub const MAX: Wrapping<isize> = _

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the largest value that can be represented by this integer type.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(<Wrapping<isize>>::MAX, Wrapping(isize::MAX));

pub const BITS: u32 = 64u32

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the size of this integer type in bits.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(<Wrapping<isize>>::BITS, isize::BITS);

pub const fn count_ones(self) -> u32

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of ones in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0b01001100isize);

assert_eq!(n.count_ones(), 3);

pub const fn count_zeros(self) -> u32

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(!0isize).count_zeros(), 0);

pub const fn trailing_zeros(self) -> u32

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of trailing zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0b0101000isize);

assert_eq!(n.trailing_zeros(), 3);

pub const fn rotate_left(self, n: u32) -> Wrapping<isize>

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Shifts the bits to the left by a specified amount, n, wrapping the truncated bits to the end of the resulting integer.

Please note this isn’t the same operation as the << shifting operator!

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);
let m: Wrapping<i64> = Wrapping(-0x76543210FEDCBA99);

assert_eq!(n.rotate_left(32), m);

pub const fn rotate_right(self, n: u32) -> Wrapping<isize>

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Shifts the bits to the right by a specified amount, n, wrapping the truncated bits to the beginning of the resulting integer.

Please note this isn’t the same operation as the >> shifting operator!

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);
let m: Wrapping<i64> = Wrapping(-0xFEDCBA987654322);

assert_eq!(n.rotate_right(4), m);

pub const fn swap_bytes(self) -> Wrapping<isize>

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Reverses the byte order of the integer.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i16> = Wrapping(0b0000000_01010101);
assert_eq!(n, Wrapping(85));

let m = n.swap_bytes();

assert_eq!(m, Wrapping(0b01010101_00000000));
assert_eq!(m, Wrapping(21760));

pub const fn reverse_bits(self) -> Wrapping<isize>

Reverses the bit pattern of the integer.

Examples

Please note that this example is shared between integer types. Which explains why i16 is used here.

Basic usage:

use std::num::Wrapping;

let n = Wrapping(0b0000000_01010101i16);
assert_eq!(n, Wrapping(85));

let m = n.reverse_bits();

assert_eq!(m.0 as u16, 0b10101010_00000000);
assert_eq!(m, Wrapping(-22016));

pub const fn from_be(x: Wrapping<isize>) -> Wrapping<isize>

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts an integer from big endian to the target’s endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Aisize);

if cfg!(target_endian = "big") {
    assert_eq!(<Wrapping<isize>>::from_be(n), n)
} else {
    assert_eq!(<Wrapping<isize>>::from_be(n), n.swap_bytes())
}

pub const fn from_le(x: Wrapping<isize>) -> Wrapping<isize>

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts an integer from little endian to the target’s endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Aisize);

if cfg!(target_endian = "little") {
    assert_eq!(<Wrapping<isize>>::from_le(n), n)
} else {
    assert_eq!(<Wrapping<isize>>::from_le(n), n.swap_bytes())
}

pub const fn to_be(self) -> Wrapping<isize>

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts self to big endian from the target’s endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Aisize);

if cfg!(target_endian = "big") {
    assert_eq!(n.to_be(), n)
} else {
    assert_eq!(n.to_be(), n.swap_bytes())
}

pub const fn to_le(self) -> Wrapping<isize>

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts self to little endian from the target’s endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Aisize);

if cfg!(target_endian = "little") {
    assert_eq!(n.to_le(), n)
} else {
    assert_eq!(n.to_le(), n.swap_bytes())
}

pub fn pow(self, exp: u32) -> Wrapping<isize>

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Raises self to the power of exp, using exponentiation by squaring.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(3isize).pow(4), Wrapping(81));

Results that are too large are wrapped:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(3i8).pow(5), Wrapping(-13));
assert_eq!(Wrapping(3i8).pow(6), Wrapping(-39));

impl Wrapping<i8>

pub const MIN: Wrapping<i8> = _

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the smallest value that can be represented by this integer type.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(<Wrapping<i8>>::MIN, Wrapping(i8::MIN));

pub const MAX: Wrapping<i8> = _

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the largest value that can be represented by this integer type.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(<Wrapping<i8>>::MAX, Wrapping(i8::MAX));

pub const BITS: u32 = 8u32

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the size of this integer type in bits.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(<Wrapping<i8>>::BITS, i8::BITS);

pub const fn count_ones(self) -> u32

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of ones in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0b01001100i8);

assert_eq!(n.count_ones(), 3);

pub const fn count_zeros(self) -> u32

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(!0i8).count_zeros(), 0);

pub const fn trailing_zeros(self) -> u32

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of trailing zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0b0101000i8);

assert_eq!(n.trailing_zeros(), 3);

pub const fn rotate_left(self, n: u32) -> Wrapping<i8>

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Shifts the bits to the left by a specified amount, n, wrapping the truncated bits to the end of the resulting integer.

Please note this isn’t the same operation as the << shifting operator!

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);
let m: Wrapping<i64> = Wrapping(-0x76543210FEDCBA99);

assert_eq!(n.rotate_left(32), m);

pub const fn rotate_right(self, n: u32) -> Wrapping<i8>

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Shifts the bits to the right by a specified amount, n, wrapping the truncated bits to the beginning of the resulting integer.

Please note this isn’t the same operation as the >> shifting operator!

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);
let m: Wrapping<i64> = Wrapping(-0xFEDCBA987654322);

assert_eq!(n.rotate_right(4), m);

pub const fn swap_bytes(self) -> Wrapping<i8>

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Reverses the byte order of the integer.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i16> = Wrapping(0b0000000_01010101);
assert_eq!(n, Wrapping(85));

let m = n.swap_bytes();

assert_eq!(m, Wrapping(0b01010101_00000000));
assert_eq!(m, Wrapping(21760));

pub const fn reverse_bits(self) -> Wrapping<i8>

Reverses the bit pattern of the integer.

Examples

Please note that this example is shared between integer types. Which explains why i16 is used here.

Basic usage:

use std::num::Wrapping;

let n = Wrapping(0b0000000_01010101i16);
assert_eq!(n, Wrapping(85));

let m = n.reverse_bits();

assert_eq!(m.0 as u16, 0b10101010_00000000);
assert_eq!(m, Wrapping(-22016));

pub const fn from_be(x: Wrapping<i8>) -> Wrapping<i8>

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts an integer from big endian to the target’s endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Ai8);

if cfg!(target_endian = "big") {
    assert_eq!(<Wrapping<i8>>::from_be(n), n)
} else {
    assert_eq!(<Wrapping<i8>>::from_be(n), n.swap_bytes())
}

pub const fn from_le(x: Wrapping<i8>) -> Wrapping<i8>

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts an integer from little endian to the target’s endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Ai8);

if cfg!(target_endian = "little") {
    assert_eq!(<Wrapping<i8>>::from_le(n), n)
} else {
    assert_eq!(<Wrapping<i8>>::from_le(n), n.swap_bytes())
}

pub const fn to_be(self) -> Wrapping<i8>

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts self to big endian from the target’s endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Ai8);

if cfg!(target_endian = "big") {
    assert_eq!(n.to_be(), n)
} else {
    assert_eq!(n.to_be(), n.swap_bytes())
}

pub const fn to_le(self) -> Wrapping<i8>

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts self to little endian from the target’s endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Ai8);

if cfg!(target_endian = "little") {
    assert_eq!(n.to_le(), n)
} else {
    assert_eq!(n.to_le(), n.swap_bytes())
}

pub fn pow(self, exp: u32) -> Wrapping<i8>

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Raises self to the power of exp, using exponentiation by squaring.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(3i8).pow(4), Wrapping(81));

Results that are too large are wrapped:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(3i8).pow(5), Wrapping(-13));
assert_eq!(Wrapping(3i8).pow(6), Wrapping(-39));

impl Wrapping<i16>

pub const MIN: Wrapping<i16> = _

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the smallest value that can be represented by this integer type.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(<Wrapping<i16>>::MIN, Wrapping(i16::MIN));

pub const MAX: Wrapping<i16> = _

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the largest value that can be represented by this integer type.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(<Wrapping<i16>>::MAX, Wrapping(i16::MAX));

pub const BITS: u32 = 16u32

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the size of this integer type in bits.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(<Wrapping<i16>>::BITS, i16::BITS);

pub const fn count_ones(self) -> u32

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of ones in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0b01001100i16);

assert_eq!(n.count_ones(), 3);

pub const fn count_zeros(self) -> u32

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(!0i16).count_zeros(), 0);

pub const fn trailing_zeros(self) -> u32

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of trailing zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0b0101000i16);

assert_eq!(n.trailing_zeros(), 3);

pub const fn rotate_left(self, n: u32) -> Wrapping<i16>

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Shifts the bits to the left by a specified amount, n, wrapping the truncated bits to the end of the resulting integer.

Please note this isn’t the same operation as the << shifting operator!

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);
let m: Wrapping<i64> = Wrapping(-0x76543210FEDCBA99);

assert_eq!(n.rotate_left(32), m);

pub const fn rotate_right(self, n: u32) -> Wrapping<i16>

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Shifts the bits to the right by a specified amount, n, wrapping the truncated bits to the beginning of the resulting integer.

Please note this isn’t the same operation as the >> shifting operator!

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);
let m: Wrapping<i64> = Wrapping(-0xFEDCBA987654322);

assert_eq!(n.rotate_right(4), m);

pub const fn swap_bytes(self) -> Wrapping<i16>

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Reverses the byte order of the integer.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i16> = Wrapping(0b0000000_01010101);
assert_eq!(n, Wrapping(85));

let m = n.swap_bytes();

assert_eq!(m, Wrapping(0b01010101_00000000));
assert_eq!(m, Wrapping(21760));

pub const fn reverse_bits(self) -> Wrapping<i16>

Reverses the bit pattern of the integer.

Examples

Please note that this example is shared between integer types. Which explains why i16 is used here.

Basic usage:

use std::num::Wrapping;

let n = Wrapping(0b0000000_01010101i16);
assert_eq!(n, Wrapping(85));

let m = n.reverse_bits();

assert_eq!(m.0 as u16, 0b10101010_00000000);
assert_eq!(m, Wrapping(-22016));

pub const fn from_be(x: Wrapping<i16>) -> Wrapping<i16>

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts an integer from big endian to the target’s endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Ai16);

if cfg!(target_endian = "big") {
    assert_eq!(<Wrapping<i16>>::from_be(n), n)
} else {
    assert_eq!(<Wrapping<i16>>::from_be(n), n.swap_bytes())
}

pub const fn from_le(x: Wrapping<i16>) -> Wrapping<i16>

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts an integer from little endian to the target’s endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Ai16);

if cfg!(target_endian = "little") {
    assert_eq!(<Wrapping<i16>>::from_le(n), n)
} else {
    assert_eq!(<Wrapping<i16>>::from_le(n), n.swap_bytes())
}

pub const fn to_be(self) -> Wrapping<i16>

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts self to big endian from the target’s endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Ai16);

if cfg!(target_endian = "big") {
    assert_eq!(n.to_be(), n)
} else {
    assert_eq!(n.to_be(), n.swap_bytes())
}

pub const fn to_le(self) -> Wrapping<i16>

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts self to little endian from the target’s endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Ai16);

if cfg!(target_endian = "little") {
    assert_eq!(n.to_le(), n)
} else {
    assert_eq!(n.to_le(), n.swap_bytes())
}

pub fn pow(self, exp: u32) -> Wrapping<i16>

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Raises self to the power of exp, using exponentiation by squaring.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(3i16).pow(4), Wrapping(81));

Results that are too large are wrapped:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(3i8).pow(5), Wrapping(-13));
assert_eq!(Wrapping(3i8).pow(6), Wrapping(-39));

impl Wrapping<i32>

pub const MIN: Wrapping<i32> = _

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the smallest value that can be represented by this integer type.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(<Wrapping<i32>>::MIN, Wrapping(i32::MIN));

pub const MAX: Wrapping<i32> = _

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the largest value that can be represented by this integer type.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(<Wrapping<i32>>::MAX, Wrapping(i32::MAX));

pub const BITS: u32 = 32u32

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the size of this integer type in bits.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(<Wrapping<i32>>::BITS, i32::BITS);

pub const fn count_ones(self) -> u32

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of ones in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0b01001100i32);

assert_eq!(n.count_ones(), 3);

pub const fn count_zeros(self) -> u32

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(!0i32).count_zeros(), 0);

pub const fn trailing_zeros(self) -> u32

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of trailing zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0b0101000i32);

assert_eq!(n.trailing_zeros(), 3);

pub const fn rotate_left(self, n: u32) -> Wrapping<i32>

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Shifts the bits to the left by a specified amount, n, wrapping the truncated bits to the end of the resulting integer.

Please note this isn’t the same operation as the << shifting operator!

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);
let m: Wrapping<i64> = Wrapping(-0x76543210FEDCBA99);

assert_eq!(n.rotate_left(32), m);

pub const fn rotate_right(self, n: u32) -> Wrapping<i32>

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Shifts the bits to the right by a specified amount, n, wrapping the truncated bits to the beginning of the resulting integer.

Please note this isn’t the same operation as the >> shifting operator!

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);
let m: Wrapping<i64> = Wrapping(-0xFEDCBA987654322);

assert_eq!(n.rotate_right(4), m);

pub const fn swap_bytes(self) -> Wrapping<i32>

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Reverses the byte order of the integer.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i16> = Wrapping(0b0000000_01010101);
assert_eq!(n, Wrapping(85));

let m = n.swap_bytes();

assert_eq!(m, Wrapping(0b01010101_00000000));
assert_eq!(m, Wrapping(21760));

pub const fn reverse_bits(self) -> Wrapping<i32>

Reverses the bit pattern of the integer.

Examples

Please note that this example is shared between integer types. Which explains why i16 is used here.

Basic usage:

use std::num::Wrapping;

let n = Wrapping(0b0000000_01010101i16);
assert_eq!(n, Wrapping(85));

let m = n.reverse_bits();

assert_eq!(m.0 as u16, 0b10101010_00000000);
assert_eq!(m, Wrapping(-22016));

pub const fn from_be(x: Wrapping<i32>) -> Wrapping<i32>

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts an integer from big endian to the target’s endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Ai32);

if cfg!(target_endian = "big") {
    assert_eq!(<Wrapping<i32>>::from_be(n), n)
} else {
    assert_eq!(<Wrapping<i32>>::from_be(n), n.swap_bytes())
}

pub const fn from_le(x: Wrapping<i32>) -> Wrapping<i32>

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts an integer from little endian to the target’s endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Ai32);

if cfg!(target_endian = "little") {
    assert_eq!(<Wrapping<i32>>::from_le(n), n)
} else {
    assert_eq!(<Wrapping<i32>>::from_le(n), n.swap_bytes())
}

pub const fn to_be(self) -> Wrapping<i32>

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts self to big endian from the target’s endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Ai32);

if cfg!(target_endian = "big") {
    assert_eq!(n.to_be(), n)
} else {
    assert_eq!(n.to_be(), n.swap_bytes())
}

pub const fn to_le(self) -> Wrapping<i32>

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts self to little endian from the target’s endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Ai32);

if cfg!(target_endian = "little") {
    assert_eq!(n.to_le(), n)
} else {
    assert_eq!(n.to_le(), n.swap_bytes())
}

pub fn pow(self, exp: u32) -> Wrapping<i32>

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Raises self to the power of exp, using exponentiation by squaring.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(3i32).pow(4), Wrapping(81));

Results that are too large are wrapped:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(3i8).pow(5), Wrapping(-13));
assert_eq!(Wrapping(3i8).pow(6), Wrapping(-39));

impl Wrapping<i64>

pub const MIN: Wrapping<i64> = _

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the smallest value that can be represented by this integer type.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(<Wrapping<i64>>::MIN, Wrapping(i64::MIN));

pub const MAX: Wrapping<i64> = _

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the largest value that can be represented by this integer type.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(<Wrapping<i64>>::MAX, Wrapping(i64::MAX));

pub const BITS: u32 = 64u32

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the size of this integer type in bits.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(<Wrapping<i64>>::BITS, i64::BITS);

pub const fn count_ones(self) -> u32

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of ones in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0b01001100i64);

assert_eq!(n.count_ones(), 3);

pub const fn count_zeros(self) -> u32

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(!0i64).count_zeros(), 0);

pub const fn trailing_zeros(self) -> u32

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of trailing zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0b0101000i64);

assert_eq!(n.trailing_zeros(), 3);

pub const fn rotate_left(self, n: u32) -> Wrapping<i64>

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Shifts the bits to the left by a specified amount, n, wrapping the truncated bits to the end of the resulting integer.

Please note this isn’t the same operation as the << shifting operator!

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);
let m: Wrapping<i64> = Wrapping(-0x76543210FEDCBA99);

assert_eq!(n.rotate_left(32), m);

pub const fn rotate_right(self, n: u32) -> Wrapping<i64>

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Shifts the bits to the right by a specified amount, n, wrapping the truncated bits to the beginning of the resulting integer.

Please note this isn’t the same operation as the >> shifting operator!

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);
let m: Wrapping<i64> = Wrapping(-0xFEDCBA987654322);

assert_eq!(n.rotate_right(4), m);

pub const fn swap_bytes(self) -> Wrapping<i64>

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Reverses the byte order of the integer.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i16> = Wrapping(0b0000000_01010101);
assert_eq!(n, Wrapping(85));

let m = n.swap_bytes();

assert_eq!(m, Wrapping(0b01010101_00000000));
assert_eq!(m, Wrapping(21760));

pub const fn reverse_bits(self) -> Wrapping<i64>

Reverses the bit pattern of the integer.

Examples

Please note that this example is shared between integer types. Which explains why i16 is used here.

Basic usage:

use std::num::Wrapping;

let n = Wrapping(0b0000000_01010101i16);
assert_eq!(n, Wrapping(85));

let m = n.reverse_bits();

assert_eq!(m.0 as u16, 0b10101010_00000000);
assert_eq!(m, Wrapping(-22016));

pub const fn from_be(x: Wrapping<i64>) -> Wrapping<i64>

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts an integer from big endian to the target’s endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Ai64);

if cfg!(target_endian = "big") {
    assert_eq!(<Wrapping<i64>>::from_be(n), n)
} else {
    assert_eq!(<Wrapping<i64>>::from_be(n), n.swap_bytes())
}

pub const fn from_le(x: Wrapping<i64>) -> Wrapping<i64>

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts an integer from little endian to the target’s endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Ai64);

if cfg!(target_endian = "little") {
    assert_eq!(<Wrapping<i64>>::from_le(n), n)
} else {
    assert_eq!(<Wrapping<i64>>::from_le(n), n.swap_bytes())
}

pub const fn to_be(self) -> Wrapping<i64>

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts self to big endian from the target’s endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Ai64);

if cfg!(target_endian = "big") {
    assert_eq!(n.to_be(), n)
} else {
    assert_eq!(n.to_be(), n.swap_bytes())
}

pub const fn to_le(self) -> Wrapping<i64>

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts self to little endian from the target’s endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Ai64);

if cfg!(target_endian = "little") {
    assert_eq!(n.to_le(), n)
} else {
    assert_eq!(n.to_le(), n.swap_bytes())
}

pub fn pow(self, exp: u32) -> Wrapping<i64>

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Raises self to the power of exp, using exponentiation by squaring.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(3i64).pow(4), Wrapping(81));

Results that are too large are wrapped:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(3i8).pow(5), Wrapping(-13));
assert_eq!(Wrapping(3i8).pow(6), Wrapping(-39));

impl Wrapping<i128>

pub const MIN: Wrapping<i128> = _

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the smallest value that can be represented by this integer type.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(<Wrapping<i128>>::MIN, Wrapping(i128::MIN));

pub const MAX: Wrapping<i128> = _

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the largest value that can be represented by this integer type.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(<Wrapping<i128>>::MAX, Wrapping(i128::MAX));

pub const BITS: u32 = 128u32

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the size of this integer type in bits.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(<Wrapping<i128>>::BITS, i128::BITS);

pub const fn count_ones(self) -> u32

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of ones in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0b01001100i128);

assert_eq!(n.count_ones(), 3);

pub const fn count_zeros(self) -> u32

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(!0i128).count_zeros(), 0);

pub const fn trailing_zeros(self) -> u32

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of trailing zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0b0101000i128);

assert_eq!(n.trailing_zeros(), 3);

pub const fn rotate_left(self, n: u32) -> Wrapping<i128>

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Shifts the bits to the left by a specified amount, n, wrapping the truncated bits to the end of the resulting integer.

Please note this isn’t the same operation as the << shifting operator!

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);
let m: Wrapping<i64> = Wrapping(-0x76543210FEDCBA99);

assert_eq!(n.rotate_left(32), m);

pub const fn rotate_right(self, n: u32) -> Wrapping<i128>

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Shifts the bits to the right by a specified amount, n, wrapping the truncated bits to the beginning of the resulting integer.

Please note this isn’t the same operation as the >> shifting operator!

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);
let m: Wrapping<i64> = Wrapping(-0xFEDCBA987654322);

assert_eq!(n.rotate_right(4), m);

pub const fn swap_bytes(self) -> Wrapping<i128>

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Reverses the byte order of the integer.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i16> = Wrapping(0b0000000_01010101);
assert_eq!(n, Wrapping(85));

let m = n.swap_bytes();

assert_eq!(m, Wrapping(0b01010101_00000000));
assert_eq!(m, Wrapping(21760));

pub const fn reverse_bits(self) -> Wrapping<i128>

Reverses the bit pattern of the integer.

Examples

Please note that this example is shared between integer types. Which explains why i16 is used here.

Basic usage:

use std::num::Wrapping;

let n = Wrapping(0b0000000_01010101i16);
assert_eq!(n, Wrapping(85));

let m = n.reverse_bits();

assert_eq!(m.0 as u16, 0b10101010_00000000);
assert_eq!(m, Wrapping(-22016));

pub const fn from_be(x: Wrapping<i128>) -> Wrapping<i128>

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts an integer from big endian to the target’s endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Ai128);

if cfg!(target_endian = "big") {
    assert_eq!(<Wrapping<i128>>::from_be(n), n)
} else {
    assert_eq!(<Wrapping<i128>>::from_be(n), n.swap_bytes())
}

pub const fn from_le(x: Wrapping<i128>) -> Wrapping<i128>

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts an integer from little endian to the target’s endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Ai128);

if cfg!(target_endian = "little") {
    assert_eq!(<Wrapping<i128>>::from_le(n), n)
} else {
    assert_eq!(<Wrapping<i128>>::from_le(n), n.swap_bytes())
}

pub const fn to_be(self) -> Wrapping<i128>

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts self to big endian from the target’s endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Ai128);

if cfg!(target_endian = "big") {
    assert_eq!(n.to_be(), n)
} else {
    assert_eq!(n.to_be(), n.swap_bytes())
}

pub const fn to_le(self) -> Wrapping<i128>

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts self to little endian from the target’s endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Ai128);

if cfg!(target_endian = "little") {
    assert_eq!(n.to_le(), n)
} else {
    assert_eq!(n.to_le(), n.swap_bytes())
}

pub fn pow(self, exp: u32) -> Wrapping<i128>

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Raises self to the power of exp, using exponentiation by squaring.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(3i128).pow(4), Wrapping(81));

Results that are too large are wrapped:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(3i8).pow(5), Wrapping(-13));
assert_eq!(Wrapping(3i8).pow(6), Wrapping(-39));

impl Wrapping<isize>

pub const fn leading_zeros(self) -> u32

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of leading zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(isize::MAX) >> 2;

assert_eq!(n.leading_zeros(), 3);

pub fn abs(self) -> Wrapping<isize>

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Computes the absolute value of self, wrapping around at the boundary of the type.

The only case where such wrapping can occur is when one takes the absolute value of the negative minimal value for the type this is a positive value that is too large to represent in the type. In such a case, this function returns MIN itself.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(100isize).abs(), Wrapping(100));
assert_eq!(Wrapping(-100isize).abs(), Wrapping(100));
assert_eq!(Wrapping(isize::MIN).abs(), Wrapping(isize::MIN));
assert_eq!(Wrapping(-128i8).abs().0 as u8, 128u8);

pub fn signum(self) -> Wrapping<isize>

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns a number representing sign of self.

• 0 if the number is zero
• 1 if the number is positive
• -1 if the number is negative

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(10isize).signum(), Wrapping(1));
assert_eq!(Wrapping(0isize).signum(), Wrapping(0));
assert_eq!(Wrapping(-10isize).signum(), Wrapping(-1));

pub const fn is_positive(self) -> bool

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns true if self is positive and false if the number is zero or negative.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert!(Wrapping(10isize).is_positive());
assert!(!Wrapping(-10isize).is_positive());

pub const fn is_negative(self) -> bool

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns true if self is negative and false if the number is zero or positive.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert!(Wrapping(-10isize).is_negative());
assert!(!Wrapping(10isize).is_negative());

impl Wrapping<i8>

pub const fn leading_zeros(self) -> u32

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of leading zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(i8::MAX) >> 2;

assert_eq!(n.leading_zeros(), 3);

pub fn abs(self) -> Wrapping<i8>

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Computes the absolute value of self, wrapping around at the boundary of the type.

The only case where such wrapping can occur is when one takes the absolute value of the negative minimal value for the type this is a positive value that is too large to represent in the type. In such a case, this function returns MIN itself.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(100i8).abs(), Wrapping(100));
assert_eq!(Wrapping(-100i8).abs(), Wrapping(100));
assert_eq!(Wrapping(i8::MIN).abs(), Wrapping(i8::MIN));
assert_eq!(Wrapping(-128i8).abs().0 as u8, 128u8);

pub fn signum(self) -> Wrapping<i8>

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns a number representing sign of self.

• 0 if the number is zero
• 1 if the number is positive
• -1 if the number is negative

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(10i8).signum(), Wrapping(1));
assert_eq!(Wrapping(0i8).signum(), Wrapping(0));
assert_eq!(Wrapping(-10i8).signum(), Wrapping(-1));

pub const fn is_positive(self) -> bool

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns true if self is positive and false if the number is zero or negative.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert!(Wrapping(10i8).is_positive());
assert!(!Wrapping(-10i8).is_positive());

pub const fn is_negative(self) -> bool

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns true if self is negative and false if the number is zero or positive.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert!(Wrapping(-10i8).is_negative());
assert!(!Wrapping(10i8).is_negative());

impl Wrapping<i16>

pub const fn leading_zeros(self) -> u32

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of leading zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(i16::MAX) >> 2;

assert_eq!(n.leading_zeros(), 3);

pub fn abs(self) -> Wrapping<i16>

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Computes the absolute value of self, wrapping around at the boundary of the type.

The only case where such wrapping can occur is when one takes the absolute value of the negative minimal value for the type this is a positive value that is too large to represent in the type. In such a case, this function returns MIN itself.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(100i16).abs(), Wrapping(100));
assert_eq!(Wrapping(-100i16).abs(), Wrapping(100));
assert_eq!(Wrapping(i16::MIN).abs(), Wrapping(i16::MIN));
assert_eq!(Wrapping(-128i8).abs().0 as u8, 128u8);

pub fn signum(self) -> Wrapping<i16>

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns a number representing sign of self.

• 0 if the number is zero
• 1 if the number is positive
• -1 if the number is negative

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(10i16).signum(), Wrapping(1));
assert_eq!(Wrapping(0i16).signum(), Wrapping(0));
assert_eq!(Wrapping(-10i16).signum(), Wrapping(-1));

pub const fn is_positive(self) -> bool

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns true if self is positive and false if the number is zero or negative.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert!(Wrapping(10i16).is_positive());
assert!(!Wrapping(-10i16).is_positive());

pub const fn is_negative(self) -> bool

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns true if self is negative and false if the number is zero or positive.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert!(Wrapping(-10i16).is_negative());
assert!(!Wrapping(10i16).is_negative());

impl Wrapping<i32>

pub const fn leading_zeros(self) -> u32

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of leading zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(i32::MAX) >> 2;

assert_eq!(n.leading_zeros(), 3);

pub fn abs(self) -> Wrapping<i32>

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Computes the absolute value of self, wrapping around at the boundary of the type.

The only case where such wrapping can occur is when one takes the absolute value of the negative minimal value for the type this is a positive value that is too large to represent in the type. In such a case, this function returns MIN itself.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(100i32).abs(), Wrapping(100));
assert_eq!(Wrapping(-100i32).abs(), Wrapping(100));
assert_eq!(Wrapping(i32::MIN).abs(), Wrapping(i32::MIN));
assert_eq!(Wrapping(-128i8).abs().0 as u8, 128u8);

pub fn signum(self) -> Wrapping<i32>

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns a number representing sign of self.

• 0 if the number is zero
• 1 if the number is positive
• -1 if the number is negative

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(10i32).signum(), Wrapping(1));
assert_eq!(Wrapping(0i32).signum(), Wrapping(0));
assert_eq!(Wrapping(-10i32).signum(), Wrapping(-1));

pub const fn is_positive(self) -> bool

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns true if self is positive and false if the number is zero or negative.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert!(Wrapping(10i32).is_positive());
assert!(!Wrapping(-10i32).is_positive());

pub const fn is_negative(self) -> bool

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns true if self is negative and false if the number is zero or positive.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert!(Wrapping(-10i32).is_negative());
assert!(!Wrapping(10i32).is_negative());

impl Wrapping<i64>

pub const fn leading_zeros(self) -> u32

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of leading zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(i64::MAX) >> 2;

assert_eq!(n.leading_zeros(), 3);

pub fn abs(self) -> Wrapping<i64>

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Computes the absolute value of self, wrapping around at the boundary of the type.

The only case where such wrapping can occur is when one takes the absolute value of the negative minimal value for the type this is a positive value that is too large to represent in the type. In such a case, this function returns MIN itself.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(100i64).abs(), Wrapping(100));
assert_eq!(Wrapping(-100i64).abs(), Wrapping(100));
assert_eq!(Wrapping(i64::MIN).abs(), Wrapping(i64::MIN));
assert_eq!(Wrapping(-128i8).abs().0 as u8, 128u8);

pub fn signum(self) -> Wrapping<i64>

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns a number representing sign of self.

• 0 if the number is zero
• 1 if the number is positive
• -1 if the number is negative

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(10i64).signum(), Wrapping(1));
assert_eq!(Wrapping(0i64).signum(), Wrapping(0));
assert_eq!(Wrapping(-10i64).signum(), Wrapping(-1));

pub const fn is_positive(self) -> bool

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns true if self is positive and false if the number is zero or negative.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert!(Wrapping(10i64).is_positive());
assert!(!Wrapping(-10i64).is_positive());

pub const fn is_negative(self) -> bool

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns true if self is negative and false if the number is zero or positive.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert!(Wrapping(-10i64).is_negative());
assert!(!Wrapping(10i64).is_negative());

impl Wrapping<i128>

pub const fn leading_zeros(self) -> u32

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of leading zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(i128::MAX) >> 2;

assert_eq!(n.leading_zeros(), 3);

pub fn abs(self) -> Wrapping<i128>

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Computes the absolute value of self, wrapping around at the boundary of the type.

The only case where such wrapping can occur is when one takes the absolute value of the negative minimal value for the type this is a positive value that is too large to represent in the type. In such a case, this function returns MIN itself.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(100i128).abs(), Wrapping(100));
assert_eq!(Wrapping(-100i128).abs(), Wrapping(100));
assert_eq!(Wrapping(i128::MIN).abs(), Wrapping(i128::MIN));
assert_eq!(Wrapping(-128i8).abs().0 as u8, 128u8);

pub fn signum(self) -> Wrapping<i128>

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns a number representing sign of self.

• 0 if the number is zero
• 1 if the number is positive
• -1 if the number is negative

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(10i128).signum(), Wrapping(1));
assert_eq!(Wrapping(0i128).signum(), Wrapping(0));
assert_eq!(Wrapping(-10i128).signum(), Wrapping(-1));

pub const fn is_positive(self) -> bool

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns true if self is positive and false if the number is zero or negative.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert!(Wrapping(10i128).is_positive());
assert!(!Wrapping(-10i128).is_positive());

pub const fn is_negative(self) -> bool

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns true if self is negative and false if the number is zero or positive.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert!(Wrapping(-10i128).is_negative());
assert!(!Wrapping(10i128).is_negative());

impl Wrapping<usize>

pub const fn leading_zeros(self) -> u32

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of leading zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(usize::MAX) >> 2;

assert_eq!(n.leading_zeros(), 2);

pub fn is_power_of_two(self) -> bool

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns true if and only if self == 2^k for some k.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert!(Wrapping(16usize).is_power_of_two());
assert!(!Wrapping(10usize).is_power_of_two());

pub fn next_power_of_two(self) -> Wrapping<usize>

🔬This is a nightly-only experimental API. (wrapping_next_power_of_two #32463)

Returns the smallest power of two greater than or equal to self.

When return value overflows (i.e., self > (1 << (N-1)) for type uN), overflows to 2^N = 0.

Examples

Basic usage:

#![feature(wrapping_next_power_of_two)]
use std::num::Wrapping;

assert_eq!(Wrapping(2usize).next_power_of_two(), Wrapping(2));
assert_eq!(Wrapping(3usize).next_power_of_two(), Wrapping(4));
assert_eq!(Wrapping(200_u8).next_power_of_two(), Wrapping(0));

impl Wrapping<u8>

pub const fn leading_zeros(self) -> u32

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of leading zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(u8::MAX) >> 2;

assert_eq!(n.leading_zeros(), 2);

pub fn is_power_of_two(self) -> bool

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns true if and only if self == 2^k for some k.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert!(Wrapping(16u8).is_power_of_two());
assert!(!Wrapping(10u8).is_power_of_two());

pub fn next_power_of_two(self) -> Wrapping<u8>

🔬This is a nightly-only experimental API. (wrapping_next_power_of_two #32463)

Returns the smallest power of two greater than or equal to self.

When return value overflows (i.e., self > (1 << (N-1)) for type uN), overflows to 2^N = 0.

Examples

Basic usage:

#![feature(wrapping_next_power_of_two)]
use std::num::Wrapping;

assert_eq!(Wrapping(2u8).next_power_of_two(), Wrapping(2));
assert_eq!(Wrapping(3u8).next_power_of_two(), Wrapping(4));
assert_eq!(Wrapping(200_u8).next_power_of_two(), Wrapping(0));

impl Wrapping<u16>

pub const fn leading_zeros(self) -> u32

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of leading zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(u16::MAX) >> 2;

assert_eq!(n.leading_zeros(), 2);

pub fn is_power_of_two(self) -> bool

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns true if and only if self == 2^k for some k.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert!(Wrapping(16u16).is_power_of_two());
assert!(!Wrapping(10u16).is_power_of_two());

pub fn next_power_of_two(self) -> Wrapping<u16>

🔬This is a nightly-only experimental API. (wrapping_next_power_of_two #32463)

Returns the smallest power of two greater than or equal to self.

When return value overflows (i.e., self > (1 << (N-1)) for type uN), overflows to 2^N = 0.

Examples

Basic usage:

#![feature(wrapping_next_power_of_two)]
use std::num::Wrapping;

assert_eq!(Wrapping(2u16).next_power_of_two(), Wrapping(2));
assert_eq!(Wrapping(3u16).next_power_of_two(), Wrapping(4));
assert_eq!(Wrapping(200_u8).next_power_of_two(), Wrapping(0));

impl Wrapping<u32>

pub const fn leading_zeros(self) -> u32

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of leading zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(u32::MAX) >> 2;

assert_eq!(n.leading_zeros(), 2);

pub fn is_power_of_two(self) -> bool

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns true if and only if self == 2^k for some k.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert!(Wrapping(16u32).is_power_of_two());
assert!(!Wrapping(10u32).is_power_of_two());

pub fn next_power_of_two(self) -> Wrapping<u32>

🔬This is a nightly-only experimental API. (wrapping_next_power_of_two #32463)

Returns the smallest power of two greater than or equal to self.

When return value overflows (i.e., self > (1 << (N-1)) for type uN), overflows to 2^N = 0.

Examples

Basic usage:

#![feature(wrapping_next_power_of_two)]
use std::num::Wrapping;

assert_eq!(Wrapping(2u32).next_power_of_two(), Wrapping(2));
assert_eq!(Wrapping(3u32).next_power_of_two(), Wrapping(4));
assert_eq!(Wrapping(200_u8).next_power_of_two(), Wrapping(0));

impl Wrapping<u64>

pub const fn leading_zeros(self) -> u32

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of leading zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(u64::MAX) >> 2;

assert_eq!(n.leading_zeros(), 2);

pub fn is_power_of_two(self) -> bool

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns true if and only if self == 2^k for some k.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert!(Wrapping(16u64).is_power_of_two());
assert!(!Wrapping(10u64).is_power_of_two());

pub fn next_power_of_two(self) -> Wrapping<u64>

🔬This is a nightly-only experimental API. (wrapping_next_power_of_two #32463)

Returns the smallest power of two greater than or equal to self.

When return value overflows (i.e., self > (1 << (N-1)) for type uN), overflows to 2^N = 0.

Examples

Basic usage:

#![feature(wrapping_next_power_of_two)]
use std::num::Wrapping;

assert_eq!(Wrapping(2u64).next_power_of_two(), Wrapping(2));
assert_eq!(Wrapping(3u64).next_power_of_two(), Wrapping(4));
assert_eq!(Wrapping(200_u8).next_power_of_two(), Wrapping(0));

impl Wrapping<u128>

pub const fn leading_zeros(self) -> u32

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of leading zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(u128::MAX) >> 2;

assert_eq!(n.leading_zeros(), 2);

pub fn is_power_of_two(self) -> bool

🔬This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns true if and only if self == 2^k for some k.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert!(Wrapping(16u128).is_power_of_two());
assert!(!Wrapping(10u128).is_power_of_two());

pub fn next_power_of_two(self) -> Wrapping<u128>

🔬This is a nightly-only experimental API. (wrapping_next_power_of_two #32463)

Returns the smallest power of two greater than or equal to self.

When return value overflows (i.e., self > (1 << (N-1)) for type uN), overflows to 2^N = 0.

Examples

Basic usage:

#![feature(wrapping_next_power_of_two)]
use std::num::Wrapping;

assert_eq!(Wrapping(2u128).next_power_of_two(), Wrapping(2));
assert_eq!(Wrapping(3u128).next_power_of_two(), Wrapping(4));
assert_eq!(Wrapping(200_u8).next_power_of_two(), Wrapping(0));

Trait Implementations

impl Add<&Wrapping<i128>> for &Wrapping<i128>

type Output = <Wrapping<i128> as Add>::Output

The resulting type after applying the + operator.

fn add(self, other: &Wrapping<i128>) -> <Wrapping<i128> as Add>::Output

Performs the + operation.

impl Add<&Wrapping<i128>> for Wrapping<i128>

type Output = <Wrapping<i128> as Add>::Output

The resulting type after applying the + operator.

fn add(self, other: &Wrapping<i128>) -> <Wrapping<i128> as Add>::Output

Performs the + operation.

impl Add<&Wrapping<i16>> for &Wrapping<i16>

type Output = <Wrapping<i16> as Add>::Output

The resulting type after applying the + operator.

fn add(self, other: &Wrapping<i16>) -> <Wrapping<i16> as Add>::Output

Performs the + operation.

impl Add<&Wrapping<i16>> for Wrapping<i16>

type Output = <Wrapping<i16> as Add>::Output

The resulting type after applying the + operator.

fn add(self, other: &Wrapping<i16>) -> <Wrapping<i16> as Add>::Output

Performs the + operation.

impl Add<&Wrapping<i32>> for &Wrapping<i32>

type Output = <Wrapping<i32> as Add>::Output

The resulting type after applying the + operator.

fn add(self, other: &Wrapping<i32>) -> <Wrapping<i32> as Add>::Output

Performs the + operation.

impl Add<&Wrapping<i32>> for Wrapping<i32>

type Output = <Wrapping<i32> as Add>::Output

The resulting type after applying the + operator.

fn add(self, other: &Wrapping<i32>) -> <Wrapping<i32> as Add>::Output

Performs the + operation.

impl Add<&Wrapping<i64>> for &Wrapping<i64>

type Output = <Wrapping<i64> as Add>::Output

The resulting type after applying the + operator.

fn add(self, other: &Wrapping<i64>) -> <Wrapping<i64> as Add>::Output

Performs the + operation.

impl Add<&Wrapping<i64>> for Wrapping<i64>

type Output = <Wrapping<i64> as Add>::Output

The resulting type after applying the + operator.

fn add(self, other: &Wrapping<i64>) -> <Wrapping<i64> as Add>::Output

Performs the + operation.

impl Add<&Wrapping<i8>> for &Wrapping<i8>

type Output = <Wrapping<i8> as Add>::Output

The resulting type after applying the + operator.

fn add(self, other: &Wrapping<i8>) -> <Wrapping<i8> as Add>::Output

Performs the + operation.

impl Add<&Wrapping<i8>> for Wrapping<i8>

type Output = <Wrapping<i8> as Add>::Output

The resulting type after applying the + operator.

fn add(self, other: &Wrapping<i8>) -> <Wrapping<i8> as Add>::Output

Performs the + operation.

impl Add<&Wrapping<isize>> for &Wrapping<isize>

type Output = <Wrapping<isize> as Add>::Output

The resulting type after applying the + operator.

fn add(self, other: &Wrapping<isize>) -> <Wrapping<isize> as Add>::Output

Performs the + operation.

impl Add<&Wrapping<isize>> for Wrapping<isize>

type Output = <Wrapping<isize> as Add>::Output

The resulting type after applying the + operator.

fn add(self, other: &Wrapping<isize>) -> <Wrapping<isize> as Add>::Output

Performs the + operation.

impl Add<&Wrapping<u128>> for &Wrapping<u128>

type Output = <Wrapping<u128> as Add>::Output

The resulting type after applying the + operator.

fn add(self, other: &Wrapping<u128>) -> <Wrapping<u128> as Add>::Output

Performs the + operation.

impl Add<&Wrapping<u128>> for Wrapping<u128>

type Output = <Wrapping<u128> as Add>::Output

The resulting type after applying the + operator.

fn add(self, other: &Wrapping<u128>) -> <Wrapping<u128> as Add>::Output

Performs the + operation.

impl Add<&Wrapping<u16>> for &Wrapping<u16>

type Output = <Wrapping<u16> as Add>::Output

The resulting type after applying the + operator.

fn add(self, other: &Wrapping<u16>) -> <Wrapping<u16> as Add>::Output

Performs the + operation.

impl Add<&Wrapping<u16>> for Wrapping<u16>

type Output = <Wrapping<u16> as Add>::Output

The resulting type after applying the + operator.

fn add(self, other: &Wrapping<u16>) -> <Wrapping<u16> as Add>::Output

Performs the + operation.

impl Add<&Wrapping<u32>> for &Wrapping<u32>

type Output = <Wrapping<u32> as Add>::Output

The resulting type after applying the + operator.

fn add(self, other: &Wrapping<u32>) -> <Wrapping<u32> as Add>::Output

Performs the + operation.

impl Add<&Wrapping<u32>> for Wrapping<u32>

type Output = <Wrapping<u32> as Add>::Output

The resulting type after applying the + operator.

fn add(self, other: &Wrapping<u32>) -> <Wrapping<u32> as Add>::Output

Performs the + operation.

impl Add<&Wrapping<u64>> for &Wrapping<u64>

type Output = <Wrapping<u64> as Add>::Output

The resulting type after applying the + operator.

fn add(self, other: &Wrapping<u64>) -> <Wrapping<u64> as Add>::Output

Performs the + operation.

impl Add<&Wrapping<u64>> for Wrapping<u64>

type Output = <Wrapping<u64> as Add>::Output

The resulting type after applying the + operator.

fn add(self, other: &Wrapping<u64>) -> <Wrapping<u64> as Add>::Output

Performs the + operation.

impl Add<&Wrapping<u8>> for &Wrapping<u8>

type Output = <Wrapping<u8> as Add>::Output

The resulting type after applying the + operator.

fn add(self, other: &Wrapping<u8>) -> <Wrapping<u8> as Add>::Output

Performs the + operation.

impl Add<&Wrapping<u8>> for Wrapping<u8>

type Output = <Wrapping<u8> as Add>::Output

The resulting type after applying the + operator.

fn add(self, other: &Wrapping<u8>) -> <Wrapping<u8> as Add>::Output

Performs the + operation.

impl Add<&Wrapping<usize>> for &Wrapping<usize>

type Output = <Wrapping<usize> as Add>::Output

The resulting type after applying the + operator.

fn add(self, other: &Wrapping<usize>) -> <Wrapping<usize> as Add>::Output

Performs the + operation.

impl Add<&Wrapping<usize>> for Wrapping<usize>

type Output = <Wrapping<usize> as Add>::Output

The resulting type after applying the + operator.

fn add(self, other: &Wrapping<usize>) -> <Wrapping<usize> as Add>::Output

Performs the + operation.

impl<'a> Add<Wrapping<i128>> for &'a Wrapping<i128>

type Output = <Wrapping<i128> as Add>::Output

The resulting type after applying the + operator.

fn add(self, other: Wrapping<i128>) -> <Wrapping<i128> as Add>::Output

Performs the + operation.

impl<'a> Add<Wrapping<i16>> for &'a Wrapping<i16>

type Output = <Wrapping<i16> as Add>::Output

The resulting type after applying the + operator.

fn add(self, other: Wrapping<i16>) -> <Wrapping<i16> as Add>::Output

Performs the + operation.

impl<'a> Add<Wrapping<i32>> for &'a Wrapping<i32>

type Output = <Wrapping<i32> as Add>::Output

The resulting type after applying the + operator.

fn add(self, other: Wrapping<i32>) -> <Wrapping<i32> as Add>::Output

Performs the + operation.

impl<'a> Add<Wrapping<i64>> for &'a Wrapping<i64>

type Output = <Wrapping<i64> as Add>::Output

The resulting type after applying the + operator.

fn add(self, other: Wrapping<i64>) -> <Wrapping<i64> as Add>::Output

Performs the + operation.

impl<'a> Add<Wrapping<i8>> for &'a Wrapping<i8>

type Output = <Wrapping<i8> as Add>::Output

The resulting type after applying the + operator.

fn add(self, other: Wrapping<i8>) -> <Wrapping<i8> as Add>::Output

Performs the + operation.

impl<'a> Add<Wrapping<isize>> for &'a Wrapping<isize>

type Output = <Wrapping<isize> as Add>::Output

The resulting type after applying the + operator.

fn add(self, other: Wrapping<isize>) -> <Wrapping<isize> as Add>::Output

Performs the + operation.

impl<'a> Add<Wrapping<u128>> for &'a Wrapping<u128>

type Output = <Wrapping<u128> as Add>::Output

The resulting type after applying the + operator.

fn add(self, other: Wrapping<u128>) -> <Wrapping<u128> as Add>::Output

Performs the + operation.

impl<'a> Add<Wrapping<u16>> for &'a Wrapping<u16>

type Output = <Wrapping<u16> as Add>::Output

The resulting type after applying the + operator.

fn add(self, other: Wrapping<u16>) -> <Wrapping<u16> as Add>::Output

Performs the + operation.

impl<'a> Add<Wrapping<u32>> for &'a Wrapping<u32>

type Output = <Wrapping<u32> as Add>::Output

The resulting type after applying the + operator.

fn add(self, other: Wrapping<u32>) -> <Wrapping<u32> as Add>::Output

Performs the + operation.

impl<'a> Add<Wrapping<u64>> for &'a Wrapping<u64>

type Output = <Wrapping<u64> as Add>::Output

The resulting type after applying the + operator.

fn add(self, other: Wrapping<u64>) -> <Wrapping<u64> as Add>::Output

Performs the + operation.

impl<'a> Add<Wrapping<u8>> for &'a Wrapping<u8>

type Output = <Wrapping<u8> as Add>::Output

The resulting type after applying the + operator.

fn add(self, other: Wrapping<u8>) -> <Wrapping<u8> as Add>::Output

Performs the + operation.

impl<'a> Add<Wrapping<usize>> for &'a Wrapping<usize>

type Output = <Wrapping<usize> as Add>::Output

The resulting type after applying the + operator.

fn add(self, other: Wrapping<usize>) -> <Wrapping<usize> as Add>::Output

Performs the + operation.

impl Add for Wrapping<i128>

type Output = Wrapping<i128>

The resulting type after applying the + operator.

fn add(self, other: Wrapping<i128>) -> Wrapping<i128>

Performs the + operation.

impl Add for Wrapping<i16>

type Output = Wrapping<i16>

The resulting type after applying the + operator.

fn add(self, other: Wrapping<i16>) -> Wrapping<i16>

Performs the + operation.

impl Add for Wrapping<i32>

type Output = Wrapping<i32>

The resulting type after applying the + operator.

fn add(self, other: Wrapping<i32>) -> Wrapping<i32>

Performs the + operation.

impl Add for Wrapping<i64>

type Output = Wrapping<i64>

The resulting type after applying the + operator.

fn add(self, other: Wrapping<i64>) -> Wrapping<i64>

Performs the + operation.

impl Add for Wrapping<i8>

type Output = Wrapping<i8>

The resulting type after applying the + operator.

fn add(self, other: Wrapping<i8>) -> Wrapping<i8>

Performs the + operation.

impl Add for Wrapping<isize>

type Output = Wrapping<isize>

The resulting type after applying the + operator.

fn add(self, other: Wrapping<isize>) -> Wrapping<isize>

Performs the + operation.

impl Add for Wrapping<u128>

type Output = Wrapping<u128>

The resulting type after applying the + operator.

fn add(self, other: Wrapping<u128>) -> Wrapping<u128>

Performs the + operation.

impl Add for Wrapping<u16>

type Output = Wrapping<u16>

The resulting type after applying the + operator.

fn add(self, other: Wrapping<u16>) -> Wrapping<u16>

Performs the + operation.

impl Add for Wrapping<u32>

type Output = Wrapping<u32>

The resulting type after applying the + operator.

fn add(self, other: Wrapping<u32>) -> Wrapping<u32>

Performs the + operation.

impl Add for Wrapping<u64>

type Output = Wrapping<u64>

The resulting type after applying the + operator.

fn add(self, other: Wrapping<u64>) -> Wrapping<u64>

Performs the + operation.

impl Add for Wrapping<u8>

type Output = Wrapping<u8>

The resulting type after applying the + operator.

fn add(self, other: Wrapping<u8>) -> Wrapping<u8>

Performs the + operation.

impl Add for Wrapping<usize>

type Output = Wrapping<usize>

The resulting type after applying the + operator.

fn add(self, other: Wrapping<usize>) -> Wrapping<usize>

Performs the + operation.

impl AddAssign<&Wrapping<i128>> for Wrapping<i128>

fn add_assign(&mut self, other: &Wrapping<i128>)

Performs the += operation.

impl AddAssign<&Wrapping<i16>> for Wrapping<i16>

fn add_assign(&mut self, other: &Wrapping<i16>)

Performs the += operation.

impl AddAssign<&Wrapping<i32>> for Wrapping<i32>

fn add_assign(&mut self, other: &Wrapping<i32>)

Performs the += operation.

impl AddAssign<&Wrapping<i64>> for Wrapping<i64>

fn add_assign(&mut self, other: &Wrapping<i64>)

Performs the += operation.

impl AddAssign<&Wrapping<i8>> for Wrapping<i8>

fn add_assign(&mut self, other: &Wrapping<i8>)

Performs the += operation.

impl AddAssign<&Wrapping<isize>> for Wrapping<isize>

fn add_assign(&mut self, other: &Wrapping<isize>)

Performs the += operation.

impl AddAssign<&Wrapping<u128>> for Wrapping<u128>

fn add_assign(&mut self, other: &Wrapping<u128>)

Performs the += operation.

impl AddAssign<&Wrapping<u16>> for Wrapping<u16>

fn add_assign(&mut self, other: &Wrapping<u16>)

Performs the += operation.

impl AddAssign<&Wrapping<u32>> for Wrapping<u32>

fn add_assign(&mut self, other: &Wrapping<u32>)

Performs the += operation.

impl AddAssign<&Wrapping<u64>> for Wrapping<u64>

fn add_assign(&mut self, other: &Wrapping<u64>)

Performs the += operation.

impl AddAssign<&Wrapping<u8>> for Wrapping<u8>

fn add_assign(&mut self, other: &Wrapping<u8>)

Performs the += operation.

impl AddAssign<&Wrapping<usize>> for Wrapping<usize>

fn add_assign(&mut self, other: &Wrapping<usize>)

Performs the += operation.

impl AddAssign<&i128> for Wrapping<i128>

fn add_assign(&mut self, other: &i128)

Performs the += operation.

impl AddAssign<&i16> for Wrapping<i16>

fn add_assign(&mut self, other: &i16)

Performs the += operation.

impl AddAssign<&i32> for Wrapping<i32>

fn add_assign(&mut self, other: &i32)

Performs the += operation.

impl AddAssign<&i64> for Wrapping<i64>

fn add_assign(&mut self, other: &i64)

Performs the += operation.

impl AddAssign<&i8> for Wrapping<i8>

fn add_assign(&mut self, other: &i8)

Performs the += operation.

impl AddAssign<&isize> for Wrapping<isize>

fn add_assign(&mut self, other: &isize)

Performs the += operation.

impl AddAssign<&u128> for Wrapping<u128>

fn add_assign(&mut self, other: &u128)

Performs the += operation.

impl AddAssign<&u16> for Wrapping<u16>

fn add_assign(&mut self, other: &u16)

Performs the += operation.

impl AddAssign<&u32> for Wrapping<u32>

fn add_assign(&mut self, other: &u32)

Performs the += operation.

impl AddAssign<&u64> for Wrapping<u64>

fn add_assign(&mut self, other: &u64)

Performs the += operation.

impl AddAssign<&u8> for Wrapping<u8>

fn add_assign(&mut self, other: &u8)

Performs the += operation.

impl AddAssign<&usize> for Wrapping<usize>

fn add_assign(&mut self, other: &usize)

Performs the += operation.

impl AddAssign<i128> for Wrapping<i128>

fn add_assign(&mut self, other: i128)

Performs the += operation.

impl AddAssign<i16> for Wrapping<i16>

fn add_assign(&mut self, other: i16)

Performs the += operation.

impl AddAssign<i32> for Wrapping<i32>

fn add_assign(&mut self, other: i32)

Performs the += operation.

impl AddAssign<i64> for Wrapping<i64>

fn add_assign(&mut self, other: i64)

Performs the += operation.

impl AddAssign<i8> for Wrapping<i8>

fn add_assign(&mut self, other: i8)

Performs the += operation.

impl AddAssign<isize> for Wrapping<isize>

fn add_assign(&mut self, other: isize)

Performs the += operation.

impl AddAssign<u128> for Wrapping<u128>

fn add_assign(&mut self, other: u128)

Performs the += operation.

impl AddAssign<u16> for Wrapping<u16>

fn add_assign(&mut self, other: u16)

Performs the += operation.

impl AddAssign<u32> for Wrapping<u32>

fn add_assign(&mut self, other: u32)

Performs the += operation.

impl AddAssign<u64> for Wrapping<u64>

fn add_assign(&mut self, other: u64)

Performs the += operation.

impl AddAssign<u8> for Wrapping<u8>

fn add_assign(&mut self, other: u8)

Performs the += operation.

impl AddAssign<usize> for Wrapping<usize>

fn add_assign(&mut self, other: usize)

Performs the += operation.

impl AddAssign for Wrapping<i128>

fn add_assign(&mut self, other: Wrapping<i128>)

Performs the += operation.

impl AddAssign for Wrapping<i16>

fn add_assign(&mut self, other: Wrapping<i16>)

Performs the += operation.

impl AddAssign for Wrapping<i32>

fn add_assign(&mut self, other: Wrapping<i32>)

Performs the += operation.

impl AddAssign for Wrapping<i64>

fn add_assign(&mut self, other: Wrapping<i64>)

Performs the += operation.

impl AddAssign for Wrapping<i8>

fn add_assign(&mut self, other: Wrapping<i8>)

Performs the += operation.

impl AddAssign for Wrapping<isize>

fn add_assign(&mut self, other: Wrapping<isize>)

Performs the += operation.

impl AddAssign for Wrapping<u128>

fn add_assign(&mut self, other: Wrapping<u128>)

Performs the += operation.

impl AddAssign for Wrapping<u16>

fn add_assign(&mut self, other: Wrapping<u16>)

Performs the += operation.

impl AddAssign for Wrapping<u32>

fn add_assign(&mut self, other: Wrapping<u32>)

Performs the += operation.

impl AddAssign for Wrapping<u64>

fn add_assign(&mut self, other: Wrapping<u64>)

Performs the += operation.

impl AddAssign for Wrapping<u8>

fn add_assign(&mut self, other: Wrapping<u8>)

Performs the += operation.

impl AddAssign for Wrapping<usize>

fn add_assign(&mut self, other: Wrapping<usize>)

Performs the += operation.

impl<T> Binary for Wrapping<T>

where T: Binary,

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.

impl BitAnd<&Wrapping<i128>> for &Wrapping<i128>

type Output = <Wrapping<i128> as BitAnd>::Output

The resulting type after applying the & operator.

fn bitand(self, other: &Wrapping<i128>) -> <Wrapping<i128> as BitAnd>::Output

Performs the & operation.

impl BitAnd<&Wrapping<i128>> for Wrapping<i128>

type Output = <Wrapping<i128> as BitAnd>::Output

The resulting type after applying the & operator.

fn bitand(self, other: &Wrapping<i128>) -> <Wrapping<i128> as BitAnd>::Output

Performs the & operation.

impl BitAnd<&Wrapping<i16>> for &Wrapping<i16>

type Output = <Wrapping<i16> as BitAnd>::Output

The resulting type after applying the & operator.

fn bitand(self, other: &Wrapping<i16>) -> <Wrapping<i16> as BitAnd>::Output

Performs the & operation.

impl BitAnd<&Wrapping<i16>> for Wrapping<i16>

type Output = <Wrapping<i16> as BitAnd>::Output

The resulting type after applying the & operator.

fn bitand(self, other: &Wrapping<i16>) -> <Wrapping<i16> as BitAnd>::Output

Performs the & operation.

impl BitAnd<&Wrapping<i32>> for &Wrapping<i32>

type Output = <Wrapping<i32> as BitAnd>::Output

The resulting type after applying the & operator.

fn bitand(self, other: &Wrapping<i32>) -> <Wrapping<i32> as BitAnd>::Output

Performs the & operation.

impl BitAnd<&Wrapping<i32>> for Wrapping<i32>

type Output = <Wrapping<i32> as BitAnd>::Output

The resulting type after applying the & operator.

fn bitand(self, other: &Wrapping<i32>) -> <Wrapping<i32> as BitAnd>::Output

Performs the & operation.

impl BitAnd<&Wrapping<i64>> for &Wrapping<i64>

type Output = <Wrapping<i64> as BitAnd>::Output

The resulting type after applying the & operator.

fn bitand(self, other: &Wrapping<i64>) -> <Wrapping<i64> as BitAnd>::Output

Performs the & operation.

impl BitAnd<&Wrapping<i64>> for Wrapping<i64>

type Output = <Wrapping<i64> as BitAnd>::Output

The resulting type after applying the & operator.

fn bitand(self, other: &Wrapping<i64>) -> <Wrapping<i64> as BitAnd>::Output

Performs the & operation.

impl BitAnd<&Wrapping<i8>> for &Wrapping<i8>

type Output = <Wrapping<i8> as BitAnd>::Output

The resulting type after applying the & operator.

fn bitand(self, other: &Wrapping<i8>) -> <Wrapping<i8> as BitAnd>::Output

Performs the & operation.

impl BitAnd<&Wrapping<i8>> for Wrapping<i8>

type Output = <Wrapping<i8> as BitAnd>::Output

The resulting type after applying the & operator.

fn bitand(self, other: &Wrapping<i8>) -> <Wrapping<i8> as BitAnd>::Output

Performs the & operation.

impl BitAnd<&Wrapping<isize>> for &Wrapping<isize>

type Output = <Wrapping<isize> as BitAnd>::Output

The resulting type after applying the & operator.

fn bitand(self, other: &Wrapping<isize>) -> <Wrapping<isize> as BitAnd>::Output

Performs the & operation.

impl BitAnd<&Wrapping<isize>> for Wrapping<isize>

type Output = <Wrapping<isize> as BitAnd>::Output

The resulting type after applying the & operator.

fn bitand(self, other: &Wrapping<isize>) -> <Wrapping<isize> as BitAnd>::Output

Performs the & operation.

impl BitAnd<&Wrapping<u128>> for &Wrapping<u128>

type Output = <Wrapping<u128> as BitAnd>::Output

The resulting type after applying the & operator.

fn bitand(self, other: &Wrapping<u128>) -> <Wrapping<u128> as BitAnd>::Output

Performs the & operation.

impl BitAnd<&Wrapping<u128>> for Wrapping<u128>

type Output = <Wrapping<u128> as BitAnd>::Output

The resulting type after applying the & operator.

fn bitand(self, other: &Wrapping<u128>) -> <Wrapping<u128> as BitAnd>::Output

Performs the & operation.

impl BitAnd<&Wrapping<u16>> for &Wrapping<u16>

type Output = <Wrapping<u16> as BitAnd>::Output

The resulting type after applying the & operator.

fn bitand(self, other: &Wrapping<u16>) -> <Wrapping<u16> as BitAnd>::Output

Performs the & operation.

impl BitAnd<&Wrapping<u16>> for Wrapping<u16>

type Output = <Wrapping<u16> as BitAnd>::Output

The resulting type after applying the & operator.

fn bitand(self, other: &Wrapping<u16>) -> <Wrapping<u16> as BitAnd>::Output

Performs the & operation.

impl BitAnd<&Wrapping<u32>> for &Wrapping<u32>

type Output = <Wrapping<u32> as BitAnd>::Output

The resulting type after applying the & operator.

fn bitand(self, other: &Wrapping<u32>) -> <Wrapping<u32> as BitAnd>::Output

Performs the & operation.

impl BitAnd<&Wrapping<u32>> for Wrapping<u32>

type Output = <Wrapping<u32> as BitAnd>::Output

The resulting type after applying the & operator.

fn bitand(self, other: &Wrapping<u32>) -> <Wrapping<u32> as BitAnd>::Output

Performs the & operation.

impl BitAnd<&Wrapping<u64>> for &Wrapping<u64>

type Output = <Wrapping<u64> as BitAnd>::Output

The resulting type after applying the & operator.

fn bitand(self, other: &Wrapping<u64>) -> <Wrapping<u64> as BitAnd>::Output

Performs the & operation.

impl BitAnd<&Wrapping<u64>> for Wrapping<u64>

type Output = <Wrapping<u64> as BitAnd>::Output

The resulting type after applying the & operator.

fn bitand(self, other: &Wrapping<u64>) -> <Wrapping<u64> as BitAnd>::Output

Performs the & operation.

impl BitAnd<&Wrapping<u8>> for &Wrapping<u8>

type Output = <Wrapping<u8> as BitAnd>::Output

The resulting type after applying the & operator.

fn bitand(self, other: &Wrapping<u8>) -> <Wrapping<u8> as BitAnd>::Output

Performs the & operation.

impl BitAnd<&Wrapping<u8>> for Wrapping<u8>

type Output = <Wrapping<u8> as BitAnd>::Output

The resulting type after applying the & operator.

fn bitand(self, other: &Wrapping<u8>) -> <Wrapping<u8> as BitAnd>::Output

Performs the & operation.

impl BitAnd<&Wrapping<usize>> for &Wrapping<usize>

type Output = <Wrapping<usize> as BitAnd>::Output

The resulting type after applying the & operator.

fn bitand(self, other: &Wrapping<usize>) -> <Wrapping<usize> as BitAnd>::Output

Performs the & operation.

impl BitAnd<&Wrapping<usize>> for Wrapping<usize>

type Output = <Wrapping<usize> as BitAnd>::Output

The resulting type after applying the & operator.

fn bitand(self, other: &Wrapping<usize>) -> <Wrapping<usize> as BitAnd>::Output

Performs the & operation.

impl<'a> BitAnd<Wrapping<i128>> for &'a Wrapping<i128>

type Output = <Wrapping<i128> as BitAnd>::Output

The resulting type after applying the & operator.

fn bitand(self, other: Wrapping<i128>) -> <Wrapping<i128> as BitAnd>::Output

Performs the & operation.

impl<'a> BitAnd<Wrapping<i16>> for &'a Wrapping<i16>

type Output = <Wrapping<i16> as BitAnd>::Output

The resulting type after applying the & operator.

fn bitand(self, other: Wrapping<i16>) -> <Wrapping<i16> as BitAnd>::Output

Performs the & operation.

impl<'a> BitAnd<Wrapping<i32>> for &'a Wrapping<i32>

type Output = <Wrapping<i32> as BitAnd>::Output

The resulting type after applying the & operator.

fn bitand(self, other: Wrapping<i32>) -> <Wrapping<i32> as BitAnd>::Output

Performs the & operation.

impl<'a> BitAnd<Wrapping<i64>> for &'a Wrapping<i64>

type Output = <Wrapping<i64> as BitAnd>::Output

The resulting type after applying the & operator.

fn bitand(self, other: Wrapping<i64>) -> <Wrapping<i64> as BitAnd>::Output

Performs the & operation.

impl<'a> BitAnd<Wrapping<i8>> for &'a Wrapping<i8>

type Output = <Wrapping<i8> as BitAnd>::Output

The resulting type after applying the & operator.

fn bitand(self, other: Wrapping<i8>) -> <Wrapping<i8> as BitAnd>::Output

Performs the & operation.

impl<'a> BitAnd<Wrapping<isize>> for &'a Wrapping<isize>

type Output = <Wrapping<isize> as BitAnd>::Output

The resulting type after applying the & operator.

fn bitand(self, other: Wrapping<isize>) -> <Wrapping<isize> as BitAnd>::Output

Performs the & operation.

impl<'a> BitAnd<Wrapping<u128>> for &'a Wrapping<u128>

type Output = <Wrapping<u128> as BitAnd>::Output

The resulting type after applying the & operator.

fn bitand(self, other: Wrapping<u128>) -> <Wrapping<u128> as BitAnd>::Output

Performs the & operation.

impl<'a> BitAnd<Wrapping<u16>> for &'a Wrapping<u16>

type Output = <Wrapping<u16> as BitAnd>::Output

The resulting type after applying the & operator.

fn bitand(self, other: Wrapping<u16>) -> <Wrapping<u16> as BitAnd>::Output

Performs the & operation.

impl<'a> BitAnd<Wrapping<u32>> for &'a Wrapping<u32>

type Output = <Wrapping<u32> as BitAnd>::Output

The resulting type after applying the & operator.

fn bitand(self, other: Wrapping<u32>) -> <Wrapping<u32> as BitAnd>::Output

Performs the & operation.

impl<'a> BitAnd<Wrapping<u64>> for &'a Wrapping<u64>

type Output = <Wrapping<u64> as BitAnd>::Output

The resulting type after applying the & operator.

fn bitand(self, other: Wrapping<u64>) -> <Wrapping<u64> as BitAnd>::Output

Performs the & operation.

impl<'a> BitAnd<Wrapping<u8>> for &'a Wrapping<u8>

type Output = <Wrapping<u8> as BitAnd>::Output

The resulting type after applying the & operator.

fn bitand(self, other: Wrapping<u8>) -> <Wrapping<u8> as BitAnd>::Output

Performs the & operation.

impl<'a> BitAnd<Wrapping<usize>> for &'a Wrapping<usize>

type Output = <Wrapping<usize> as BitAnd>::Output

The resulting type after applying the & operator.

fn bitand(self, other: Wrapping<usize>) -> <Wrapping<usize> as BitAnd>::Output

Performs the & operation.

impl BitAnd for Wrapping<i128>

type Output = Wrapping<i128>

The resulting type after applying the & operator.

fn bitand(self, other: Wrapping<i128>) -> Wrapping<i128>

Performs the & operation.

impl BitAnd for Wrapping<i16>

type Output = Wrapping<i16>

The resulting type after applying the & operator.

fn bitand(self, other: Wrapping<i16>) -> Wrapping<i16>

Performs the & operation.

impl BitAnd for Wrapping<i32>

type Output = Wrapping<i32>

The resulting type after applying the & operator.

fn bitand(self, other: Wrapping<i32>) -> Wrapping<i32>

Performs the & operation.

impl BitAnd for Wrapping<i64>

type Output = Wrapping<i64>

The resulting type after applying the & operator.

fn bitand(self, other: Wrapping<i64>) -> Wrapping<i64>

Performs the & operation.

impl BitAnd for Wrapping<i8>

type Output = Wrapping<i8>

The resulting type after applying the & operator.

fn bitand(self, other: Wrapping<i8>) -> Wrapping<i8>

Performs the & operation.

impl BitAnd for Wrapping<isize>

type Output = Wrapping<isize>

The resulting type after applying the & operator.

fn bitand(self, other: Wrapping<isize>) -> Wrapping<isize>

Performs the & operation.

impl BitAnd for Wrapping<u128>

type Output = Wrapping<u128>

The resulting type after applying the & operator.

fn bitand(self, other: Wrapping<u128>) -> Wrapping<u128>

Performs the & operation.

impl BitAnd for Wrapping<u16>

type Output = Wrapping<u16>

The resulting type after applying the & operator.

fn bitand(self, other: Wrapping<u16>) -> Wrapping<u16>

Performs the & operation.

impl BitAnd for Wrapping<u32>

type Output = Wrapping<u32>

The resulting type after applying the & operator.

fn bitand(self, other: Wrapping<u32>) -> Wrapping<u32>

Performs the & operation.

impl BitAnd for Wrapping<u64>

type Output = Wrapping<u64>

The resulting type after applying the & operator.

fn bitand(self, other: Wrapping<u64>) -> Wrapping<u64>

Performs the & operation.

impl BitAnd for Wrapping<u8>

type Output = Wrapping<u8>

The resulting type after applying the & operator.

fn bitand(self, other: Wrapping<u8>) -> Wrapping<u8>

Performs the & operation.

impl BitAnd for Wrapping<usize>

type Output = Wrapping<usize>

The resulting type after applying the & operator.

fn bitand(self, other: Wrapping<usize>) -> Wrapping<usize>

Performs the & operation.

impl BitAndAssign<&Wrapping<i128>> for Wrapping<i128>

fn bitand_assign(&mut self, other: &Wrapping<i128>)

Performs the &= operation.

impl BitAndAssign<&Wrapping<i16>> for Wrapping<i16>

fn bitand_assign(&mut self, other: &Wrapping<i16>)

Performs the &= operation.

impl BitAndAssign<&Wrapping<i32>> for Wrapping<i32>

fn bitand_assign(&mut self, other: &Wrapping<i32>)

Performs the &= operation.

impl BitAndAssign<&Wrapping<i64>> for Wrapping<i64>

fn bitand_assign(&mut self, other: &Wrapping<i64>)

Performs the &= operation.

impl BitAndAssign<&Wrapping<i8>> for Wrapping<i8>

fn bitand_assign(&mut self, other: &Wrapping<i8>)

Performs the &= operation.

impl BitAndAssign<&Wrapping<isize>> for Wrapping<isize>

fn bitand_assign(&mut self, other: &Wrapping<isize>)

Performs the &= operation.

impl BitAndAssign<&Wrapping<u128>> for Wrapping<u128>

fn bitand_assign(&mut self, other: &Wrapping<u128>)

Performs the &= operation.

impl BitAndAssign<&Wrapping<u16>> for Wrapping<u16>

fn bitand_assign(&mut self, other: &Wrapping<u16>)

Performs the &= operation.

impl BitAndAssign<&Wrapping<u32>> for Wrapping<u32>

fn bitand_assign(&mut self, other: &Wrapping<u32>)

Performs the &= operation.

impl BitAndAssign<&Wrapping<u64>> for Wrapping<u64>

fn bitand_assign(&mut self, other: &Wrapping<u64>)

Performs the &= operation.

impl BitAndAssign<&Wrapping<u8>> for Wrapping<u8>

fn bitand_assign(&mut self, other: &Wrapping<u8>)

Performs the &= operation.

impl BitAndAssign<&Wrapping<usize>> for Wrapping<usize>

fn bitand_assign(&mut self, other: &Wrapping<usize>)

Performs the &= operation.

impl BitAndAssign<&i128> for Wrapping<i128>

fn bitand_assign(&mut self, other: &i128)

Performs the &= operation.

impl BitAndAssign<&i16> for Wrapping<i16>

fn bitand_assign(&mut self, other: &i16)

Performs the &= operation.

impl BitAndAssign<&i32> for Wrapping<i32>

fn bitand_assign(&mut self, other: &i32)

Performs the &= operation.

impl BitAndAssign<&i64> for Wrapping<i64>

fn bitand_assign(&mut self, other: &i64)

Performs the &= operation.

impl BitAndAssign<&i8> for Wrapping<i8>

fn bitand_assign(&mut self, other: &i8)

Performs the &= operation.

impl BitAndAssign<&isize> for Wrapping<isize>

fn bitand_assign(&mut self, other: &isize)

Performs the &= operation.

impl BitAndAssign<&u128> for Wrapping<u128>

fn bitand_assign(&mut self, other: &u128)

Performs the &= operation.

impl BitAndAssign<&u16> for Wrapping<u16>

fn bitand_assign(&mut self, other: &u16)

Performs the &= operation.

impl BitAndAssign<&u32> for Wrapping<u32>

fn bitand_assign(&mut self, other: &u32)

Performs the &= operation.

impl BitAndAssign<&u64> for Wrapping<u64>

fn bitand_assign(&mut self, other: &u64)

Performs the &= operation.

impl BitAndAssign<&u8> for Wrapping<u8>

fn bitand_assign(&mut self, other: &u8)

Performs the &= operation.

impl BitAndAssign<&usize> for Wrapping<usize>

fn bitand_assign(&mut self, other: &usize)

Performs the &= operation.

impl BitAndAssign<i128> for Wrapping<i128>

fn bitand_assign(&mut self, other: i128)

Performs the &= operation.

impl BitAndAssign<i16> for Wrapping<i16>

fn bitand_assign(&mut self, other: i16)

Performs the &= operation.

impl BitAndAssign<i32> for Wrapping<i32>

fn bitand_assign(&mut self, other: i32)

Performs the &= operation.

impl BitAndAssign<i64> for Wrapping<i64>

fn bitand_assign(&mut self, other: i64)

Performs the &= operation.

impl BitAndAssign<i8> for Wrapping<i8>

fn bitand_assign(&mut self, other: i8)

Performs the &= operation.

impl BitAndAssign<isize> for Wrapping<isize>

fn bitand_assign(&mut self, other: isize)

Performs the &= operation.

impl BitAndAssign<u128> for Wrapping<u128>

fn bitand_assign(&mut self, other: u128)

Performs the &= operation.

impl BitAndAssign<u16> for Wrapping<u16>

fn bitand_assign(&mut self, other: u16)

Performs the &= operation.

impl BitAndAssign<u32> for Wrapping<u32>

fn bitand_assign(&mut self, other: u32)

Performs the &= operation.

impl BitAndAssign<u64> for Wrapping<u64>

fn bitand_assign(&mut self, other: u64)

Performs the &= operation.

impl BitAndAssign<u8> for Wrapping<u8>

fn bitand_assign(&mut self, other: u8)

Performs the &= operation.

impl BitAndAssign<usize> for Wrapping<usize>

fn bitand_assign(&mut self, other: usize)

Performs the &= operation.

impl BitAndAssign for Wrapping<i128>

fn bitand_assign(&mut self, other: Wrapping<i128>)

Performs the &= operation.

impl BitAndAssign for Wrapping<i16>

fn bitand_assign(&mut self, other: Wrapping<i16>)

Performs the &= operation.

impl BitAndAssign for Wrapping<i32>

fn bitand_assign(&mut self, other: Wrapping<i32>)

Performs the &= operation.

impl BitAndAssign for Wrapping<i64>

fn bitand_assign(&mut self, other: Wrapping<i64>)

Performs the &= operation.

impl BitAndAssign for Wrapping<i8>

fn bitand_assign(&mut self, other: Wrapping<i8>)

Performs the &= operation.

impl BitAndAssign for Wrapping<isize>

fn bitand_assign(&mut self, other: Wrapping<isize>)

Performs the &= operation.

impl BitAndAssign for Wrapping<u128>

fn bitand_assign(&mut self, other: Wrapping<u128>)

Performs the &= operation.

impl BitAndAssign for Wrapping<u16>

fn bitand_assign(&mut self, other: Wrapping<u16>)

Performs the &= operation.

impl BitAndAssign for Wrapping<u32>

fn bitand_assign(&mut self, other: Wrapping<u32>)

Performs the &= operation.

impl BitAndAssign for Wrapping<u64>

fn bitand_assign(&mut self, other: Wrapping<u64>)

Performs the &= operation.

impl BitAndAssign for Wrapping<u8>

fn bitand_assign(&mut self, other: Wrapping<u8>)

Performs the &= operation.

impl BitAndAssign for Wrapping<usize>

fn bitand_assign(&mut self, other: Wrapping<usize>)

Performs the &= operation.

impl BitOr<&Wrapping<i128>> for &Wrapping<i128>

type Output = <Wrapping<i128> as BitOr>::Output

The resulting type after applying the | operator.

fn bitor(self, other: &Wrapping<i128>) -> <Wrapping<i128> as BitOr>::Output

Performs the | operation.

impl BitOr<&Wrapping<i128>> for Wrapping<i128>

type Output = <Wrapping<i128> as BitOr>::Output

The resulting type after applying the | operator.

fn bitor(self, other: &Wrapping<i128>) -> <Wrapping<i128> as BitOr>::Output

Performs the | operation.

impl BitOr<&Wrapping<i16>> for &Wrapping<i16>

type Output = <Wrapping<i16> as BitOr>::Output

The resulting type after applying the | operator.

fn bitor(self, other: &Wrapping<i16>) -> <Wrapping<i16> as BitOr>::Output

Performs the | operation.

impl BitOr<&Wrapping<i16>> for Wrapping<i16>

type Output = <Wrapping<i16> as BitOr>::Output

The resulting type after applying the | operator.

fn bitor(self, other: &Wrapping<i16>) -> <Wrapping<i16> as BitOr>::Output

Performs the | operation.

impl BitOr<&Wrapping<i32>> for &Wrapping<i32>

type Output = <Wrapping<i32> as BitOr>::Output

The resulting type after applying the | operator.

fn bitor(self, other: &Wrapping<i32>) -> <Wrapping<i32> as BitOr>::Output

Performs the | operation.

impl BitOr<&Wrapping<i32>> for Wrapping<i32>

type Output = <Wrapping<i32> as BitOr>::Output

The resulting type after applying the | operator.

fn bitor(self, other: &Wrapping<i32>) -> <Wrapping<i32> as BitOr>::Output

Performs the | operation.

impl BitOr<&Wrapping<i64>> for &Wrapping<i64>

type Output = <Wrapping<i64> as BitOr>::Output

The resulting type after applying the | operator.

fn bitor(self, other: &Wrapping<i64>) -> <Wrapping<i64> as BitOr>::Output

Performs the | operation.

impl BitOr<&Wrapping<i64>> for Wrapping<i64>

type Output = <Wrapping<i64> as BitOr>::Output

The resulting type after applying the | operator.

fn bitor(self, other: &Wrapping<i64>) -> <Wrapping<i64> as BitOr>::Output

Performs the | operation.

impl BitOr<&Wrapping<i8>> for &Wrapping<i8>

type Output = <Wrapping<i8> as BitOr>::Output

The resulting type after applying the | operator.

fn bitor(self, other: &Wrapping<i8>) -> <Wrapping<i8> as BitOr>::Output

Performs the | operation.

impl BitOr<&Wrapping<i8>> for Wrapping<i8>

type Output = <Wrapping<i8> as BitOr>::Output

The resulting type after applying the | operator.

fn bitor(self, other: &Wrapping<i8>) -> <Wrapping<i8> as BitOr>::Output

Performs the | operation.

impl BitOr<&Wrapping<isize>> for &Wrapping<isize>

type Output = <Wrapping<isize> as BitOr>::Output

The resulting type after applying the | operator.

fn bitor(self, other: &Wrapping<isize>) -> <Wrapping<isize> as BitOr>::Output

Performs the | operation.

impl BitOr<&Wrapping<isize>> for Wrapping<isize>

type Output = <Wrapping<isize> as BitOr>::Output

The resulting type after applying the | operator.

fn bitor(self, other: &Wrapping<isize>) -> <Wrapping<isize> as BitOr>::Output

Performs the | operation.

impl BitOr<&Wrapping<u128>> for &Wrapping<u128>

type Output = <Wrapping<u128> as BitOr>::Output

The resulting type after applying the | operator.

fn bitor(self, other: &Wrapping<u128>) -> <Wrapping<u128> as BitOr>::Output

Performs the | operation.

impl BitOr<&Wrapping<u128>> for Wrapping<u128>

type Output = <Wrapping<u128> as BitOr>::Output

The resulting type after applying the | operator.

fn bitor(self, other: &Wrapping<u128>) -> <Wrapping<u128> as BitOr>::Output

Performs the | operation.

impl BitOr<&Wrapping<u16>> for &Wrapping<u16>

type Output = <Wrapping<u16> as BitOr>::Output

The resulting type after applying the | operator.

fn bitor(self, other: &Wrapping<u16>) -> <Wrapping<u16> as BitOr>::Output

Performs the | operation.

impl BitOr<&Wrapping<u16>> for Wrapping<u16>

type Output = <Wrapping<u16> as BitOr>::Output

The resulting type after applying the | operator.

fn bitor(self, other: &Wrapping<u16>) -> <Wrapping<u16> as BitOr>::Output

Performs the | operation.

impl BitOr<&Wrapping<u32>> for &Wrapping<u32>

type Output = <Wrapping<u32> as BitOr>::Output

The resulting type after applying the | operator.

fn bitor(self, other: &Wrapping<u32>) -> <Wrapping<u32> as BitOr>::Output

Performs the | operation.

impl BitOr<&Wrapping<u32>> for Wrapping<u32>

type Output = <Wrapping<u32> as BitOr>::Output

The resulting type after applying the | operator.

fn bitor(self, other: &Wrapping<u32>) -> <Wrapping<u32> as BitOr>::Output

Performs the | operation.

impl BitOr<&Wrapping<u64>> for &Wrapping<u64>

type Output = <Wrapping<u64> as BitOr>::Output

The resulting type after applying the | operator.

fn bitor(self, other: &Wrapping<u64>) -> <Wrapping<u64> as BitOr>::Output

Performs the | operation.

impl BitOr<&Wrapping<u64>> for Wrapping<u64>

type Output = <Wrapping<u64> as BitOr>::Output

The resulting type after applying the | operator.

fn bitor(self, other: &Wrapping<u64>) -> <Wrapping<u64> as BitOr>::Output

Performs the | operation.

impl BitOr<&Wrapping<u8>> for &Wrapping<u8>

type Output = <Wrapping<u8> as BitOr>::Output

The resulting type after applying the | operator.

fn bitor(self, other: &Wrapping<u8>) -> <Wrapping<u8> as BitOr>::Output

Performs the | operation.

impl BitOr<&Wrapping<u8>> for Wrapping<u8>

type Output = <Wrapping<u8> as BitOr>::Output

The resulting type after applying the | operator.

fn bitor(self, other: &Wrapping<u8>) -> <Wrapping<u8> as BitOr>::Output

Performs the | operation.

impl BitOr<&Wrapping<usize>> for &Wrapping<usize>

type Output = <Wrapping<usize> as BitOr>::Output

The resulting type after applying the | operator.

fn bitor(self, other: &Wrapping<usize>) -> <Wrapping<usize> as BitOr>::Output

Performs the | operation.

impl BitOr<&Wrapping<usize>> for Wrapping<usize>

type Output = <Wrapping<usize> as BitOr>::Output

The resulting type after applying the | operator.

fn bitor(self, other: &Wrapping<usize>) -> <Wrapping<usize> as BitOr>::Output

Performs the | operation.

impl<'a> BitOr<Wrapping<i128>> for &'a Wrapping<i128>

type Output = <Wrapping<i128> as BitOr>::Output

The resulting type after applying the | operator.

fn bitor(self, other: Wrapping<i128>) -> <Wrapping<i128> as BitOr>::Output

Performs the | operation.

impl<'a> BitOr<Wrapping<i16>> for &'a Wrapping<i16>

type Output = <Wrapping<i16> as BitOr>::Output

The resulting type after applying the | operator.

fn bitor(self, other: Wrapping<i16>) -> <Wrapping<i16> as BitOr>::Output

Performs the | operation.

impl<'a> BitOr<Wrapping<i32>> for &'a Wrapping<i32>

type Output = <Wrapping<i32> as BitOr>::Output

The resulting type after applying the | operator.

fn bitor(self, other: Wrapping<i32>) -> <Wrapping<i32> as BitOr>::Output

Performs the | operation.

impl<'a> BitOr<Wrapping<i64>> for &'a Wrapping<i64>

type Output = <Wrapping<i64> as BitOr>::Output

The resulting type after applying the | operator.

fn bitor(self, other: Wrapping<i64>) -> <Wrapping<i64> as BitOr>::Output

Performs the | operation.

impl<'a> BitOr<Wrapping<i8>> for &'a Wrapping<i8>

type Output = <Wrapping<i8> as BitOr>::Output

The resulting type after applying the | operator.

fn bitor(self, other: Wrapping<i8>) -> <Wrapping<i8> as BitOr>::Output

Performs the | operation.

impl<'a> BitOr<Wrapping<isize>> for &'a Wrapping<isize>

type Output = <Wrapping<isize> as BitOr>::Output

The resulting type after applying the | operator.

fn bitor(self, other: Wrapping<isize>) -> <Wrapping<isize> as BitOr>::Output

Performs the | operation.

impl<'a> BitOr<Wrapping<u128>> for &'a Wrapping<u128>

type Output = <Wrapping<u128> as BitOr>::Output

The resulting type after applying the | operator.

fn bitor(self, other: Wrapping<u128>) -> <Wrapping<u128> as BitOr>::Output

Performs the | operation.

impl<'a> BitOr<Wrapping<u16>> for &'a Wrapping<u16>

type Output = <Wrapping<u16> as BitOr>::Output

The resulting type after applying the | operator.

fn bitor(self, other: Wrapping<u16>) -> <Wrapping<u16> as BitOr>::Output

Performs the | operation.

impl<'a> BitOr<Wrapping<u32>> for &'a Wrapping<u32>

type Output = <Wrapping<u32> as BitOr>::Output

The resulting type after applying the | operator.

fn bitor(self, other: Wrapping<u32>) -> <Wrapping<u32> as BitOr>::Output

Performs the | operation.

impl<'a> BitOr<Wrapping<u64>> for &'a Wrapping<u64>

type Output = <Wrapping<u64> as BitOr>::Output

The resulting type after applying the | operator.

fn bitor(self, other: Wrapping<u64>) -> <Wrapping<u64> as BitOr>::Output

Performs the | operation.

impl<'a> BitOr<Wrapping<u8>> for &'a Wrapping<u8>

type Output = <Wrapping<u8> as BitOr>::Output

The resulting type after applying the | operator.

fn bitor(self, other: Wrapping<u8>) -> <Wrapping<u8> as BitOr>::Output

Performs the | operation.

impl<'a> BitOr<Wrapping<usize>> for &'a Wrapping<usize>

type Output = <Wrapping<usize> as BitOr>::Output

The resulting type after applying the | operator.

fn bitor(self, other: Wrapping<usize>) -> <Wrapping<usize> as BitOr>::Output

Performs the | operation.

impl BitOr for Wrapping<i128>

type Output = Wrapping<i128>

The resulting type after applying the | operator.

fn bitor(self, other: Wrapping<i128>) -> Wrapping<i128>

Performs the | operation.

impl BitOr for Wrapping<i16>

type Output = Wrapping<i16>

The resulting type after applying the | operator.

fn bitor(self, other: Wrapping<i16>) -> Wrapping<i16>

Performs the | operation.

impl BitOr for Wrapping<i32>

type Output = Wrapping<i32>

The resulting type after applying the | operator.

fn bitor(self, other: Wrapping<i32>) -> Wrapping<i32>

Performs the | operation.

impl BitOr for Wrapping<i64>

type Output = Wrapping<i64>

The resulting type after applying the | operator.

fn bitor(self, other: Wrapping<i64>) -> Wrapping<i64>

Performs the | operation.

impl BitOr for Wrapping<i8>

type Output = Wrapping<i8>

The resulting type after applying the | operator.

fn bitor(self, other: Wrapping<i8>) -> Wrapping<i8>

Performs the | operation.

impl BitOr for Wrapping<isize>

type Output = Wrapping<isize>

The resulting type after applying the | operator.

fn bitor(self, other: Wrapping<isize>) -> Wrapping<isize>

Performs the | operation.

impl BitOr for Wrapping<u128>

type Output = Wrapping<u128>

The resulting type after applying the | operator.

fn bitor(self, other: Wrapping<u128>) -> Wrapping<u128>

Performs the | operation.

impl BitOr for Wrapping<u16>

type Output = Wrapping<u16>

The resulting type after applying the | operator.

fn bitor(self, other: Wrapping<u16>) -> Wrapping<u16>

Performs the | operation.

impl BitOr for Wrapping<u32>

type Output = Wrapping<u32>

The resulting type after applying the | operator.

fn bitor(self, other: Wrapping<u32>) -> Wrapping<u32>

Performs the | operation.

impl BitOr for Wrapping<u64>

type Output = Wrapping<u64>

The resulting type after applying the | operator.

fn bitor(self, other: Wrapping<u64>) -> Wrapping<u64>

Performs the | operation.

impl BitOr for Wrapping<u8>

type Output = Wrapping<u8>

The resulting type after applying the | operator.

fn bitor(self, other: Wrapping<u8>) -> Wrapping<u8>

Performs the | operation.

impl BitOr for Wrapping<usize>

type Output = Wrapping<usize>

The resulting type after applying the | operator.

fn bitor(self, other: Wrapping<usize>) -> Wrapping<usize>

Performs the | operation.

impl BitOrAssign<&Wrapping<i128>> for Wrapping<i128>

fn bitor_assign(&mut self, other: &Wrapping<i128>)

Performs the |= operation.

impl BitOrAssign<&Wrapping<i16>> for Wrapping<i16>

fn bitor_assign(&mut self, other: &Wrapping<i16>)

Performs the |= operation.

impl BitOrAssign<&Wrapping<i32>> for Wrapping<i32>

fn bitor_assign(&mut self, other: &Wrapping<i32>)

Performs the |= operation.

impl BitOrAssign<&Wrapping<i64>> for Wrapping<i64>

fn bitor_assign(&mut self, other: &Wrapping<i64>)

Performs the |= operation.

impl BitOrAssign<&Wrapping<i8>> for Wrapping<i8>

fn bitor_assign(&mut self, other: &Wrapping<i8>)

Performs the |= operation.

impl BitOrAssign<&Wrapping<isize>> for Wrapping<isize>

fn bitor_assign(&mut self, other: &Wrapping<isize>)

Performs the |= operation.

impl BitOrAssign<&Wrapping<u128>> for Wrapping<u128>

fn bitor_assign(&mut self, other: &Wrapping<u128>)

Performs the |= operation.

impl BitOrAssign<&Wrapping<u16>> for Wrapping<u16>

fn bitor_assign(&mut self, other: &Wrapping<u16>)

Performs the |= operation.

impl BitOrAssign<&Wrapping<u32>> for Wrapping<u32>

fn bitor_assign(&mut self, other: &Wrapping<u32>)

Performs the |= operation.

impl BitOrAssign<&Wrapping<u64>> for Wrapping<u64>

fn bitor_assign(&mut self, other: &Wrapping<u64>)

Performs the |= operation.

impl BitOrAssign<&Wrapping<u8>> for Wrapping<u8>

fn bitor_assign(&mut self, other: &Wrapping<u8>)

Performs the |= operation.

impl BitOrAssign<&Wrapping<usize>> for Wrapping<usize>

fn bitor_assign(&mut self, other: &Wrapping<usize>)

Performs the |= operation.

impl BitOrAssign<&i128> for Wrapping<i128>

fn bitor_assign(&mut self, other: &i128)

Performs the |= operation.

impl BitOrAssign<&i16> for Wrapping<i16>

fn bitor_assign(&mut self, other: &i16)

Performs the |= operation.

impl BitOrAssign<&i32> for Wrapping<i32>

fn bitor_assign(&mut self, other: &i32)

Performs the |= operation.

impl BitOrAssign<&i64> for Wrapping<i64>

fn bitor_assign(&mut self, other: &i64)

Performs the |= operation.

impl BitOrAssign<&i8> for Wrapping<i8>

fn bitor_assign(&mut self, other: &i8)

Performs the |= operation.

impl BitOrAssign<&isize> for Wrapping<isize>

fn bitor_assign(&mut self, other: &isize)

Performs the |= operation.

impl BitOrAssign<&u128> for Wrapping<u128>

fn bitor_assign(&mut self, other: &u128)

Performs the |= operation.

impl BitOrAssign<&u16> for Wrapping<u16>

fn bitor_assign(&mut self, other: &u16)

Performs the |= operation.

impl BitOrAssign<&u32> for Wrapping<u32>

fn bitor_assign(&mut self, other: &u32)

Performs the |= operation.

impl BitOrAssign<&u64> for Wrapping<u64>

fn bitor_assign(&mut self, other: &u64)

Performs the |= operation.

impl BitOrAssign<&u8> for Wrapping<u8>

fn bitor_assign(&mut self, other: &u8)

Performs the |= operation.

impl BitOrAssign<&usize> for Wrapping<usize>

fn bitor_assign(&mut self, other: &usize)

Performs the |= operation.

impl BitOrAssign<i128> for Wrapping<i128>

fn bitor_assign(&mut self, other: i128)

Performs the |= operation.

impl BitOrAssign<i16> for Wrapping<i16>

fn bitor_assign(&mut self, other: i16)

Performs the |= operation.

impl BitOrAssign<i32> for Wrapping<i32>

fn bitor_assign(&mut self, other: i32)

Performs the |= operation.

impl BitOrAssign<i64> for Wrapping<i64>

fn bitor_assign(&mut self, other: i64)

Performs the |= operation.

impl BitOrAssign<i8> for Wrapping<i8>

fn bitor_assign(&mut self, other: i8)

Performs the |= operation.

impl BitOrAssign<isize> for Wrapping<isize>

fn bitor_assign(&mut self, other: isize)

Performs the |= operation.

impl BitOrAssign<u128> for Wrapping<u128>

fn bitor_assign(&mut self, other: u128)

Performs the |= operation.

impl BitOrAssign<u16> for Wrapping<u16>

fn bitor_assign(&mut self, other: u16)

Performs the |= operation.

impl BitOrAssign<u32> for Wrapping<u32>

fn bitor_assign(&mut self, other: u32)

Performs the |= operation.

impl BitOrAssign<u64> for Wrapping<u64>

fn bitor_assign(&mut self, other: u64)

Performs the |= operation.

impl BitOrAssign<u8> for Wrapping<u8>

fn bitor_assign(&mut self, other: u8)

Performs the |= operation.

impl BitOrAssign<usize> for Wrapping<usize>

fn bitor_assign(&mut self, other: usize)

Performs the |= operation.

impl BitOrAssign for Wrapping<i128>

fn bitor_assign(&mut self, other: Wrapping<i128>)

Performs the |= operation.

impl BitOrAssign for Wrapping<i16>

fn bitor_assign(&mut self, other: Wrapping<i16>)

Performs the |= operation.

impl BitOrAssign for Wrapping<i32>

fn bitor_assign(&mut self, other: Wrapping<i32>)

Performs the |= operation.

impl BitOrAssign for Wrapping<i64>

fn bitor_assign(&mut self, other: Wrapping<i64>)

Performs the |= operation.

impl BitOrAssign for Wrapping<i8>

fn bitor_assign(&mut self, other: Wrapping<i8>)

Performs the |= operation.

impl BitOrAssign for Wrapping<isize>

fn bitor_assign(&mut self, other: Wrapping<isize>)

Performs the |= operation.

impl BitOrAssign for Wrapping<u128>

fn bitor_assign(&mut self, other: Wrapping<u128>)

Performs the |= operation.

impl BitOrAssign for Wrapping<u16>

fn bitor_assign(&mut self, other: Wrapping<u16>)

Performs the |= operation.

impl BitOrAssign for Wrapping<u32>

fn bitor_assign(&mut self, other: Wrapping<u32>)

Performs the |= operation.

impl BitOrAssign for Wrapping<u64>

fn bitor_assign(&mut self, other: Wrapping<u64>)

Performs the |= operation.

impl BitOrAssign for Wrapping<u8>

fn bitor_assign(&mut self, other: Wrapping<u8>)

Performs the |= operation.

impl BitOrAssign for Wrapping<usize>

fn bitor_assign(&mut self, other: Wrapping<usize>)

Performs the |= operation.

impl BitXor<&Wrapping<i128>> for &Wrapping<i128>

type Output = <Wrapping<i128> as BitXor>::Output

The resulting type after applying the ^ operator.

fn bitxor(self, other: &Wrapping<i128>) -> <Wrapping<i128> as BitXor>::Output

Performs the ^ operation.

impl BitXor<&Wrapping<i128>> for Wrapping<i128>

type Output = <Wrapping<i128> as BitXor>::Output

The resulting type after applying the ^ operator.

fn bitxor(self, other: &Wrapping<i128>) -> <Wrapping<i128> as BitXor>::Output

Performs the ^ operation.

impl BitXor<&Wrapping<i16>> for &Wrapping<i16>

type Output = <Wrapping<i16> as BitXor>::Output

The resulting type after applying the ^ operator.

fn bitxor(self, other: &Wrapping<i16>) -> <Wrapping<i16> as BitXor>::Output

Performs the ^ operation.

impl BitXor<&Wrapping<i16>> for Wrapping<i16>

type Output = <Wrapping<i16> as BitXor>::Output

The resulting type after applying the ^ operator.

fn bitxor(self, other: &Wrapping<i16>) -> <Wrapping<i16> as BitXor>::Output

Performs the ^ operation.

impl BitXor<&Wrapping<i32>> for &Wrapping<i32>

type Output = <Wrapping<i32> as BitXor>::Output

The resulting type after applying the ^ operator.

fn bitxor(self, other: &Wrapping<i32>) -> <Wrapping<i32> as BitXor>::Output

Performs the ^ operation.

impl BitXor<&Wrapping<i32>> for Wrapping<i32>

type Output = <Wrapping<i32> as BitXor>::Output

The resulting type after applying the ^ operator.

fn bitxor(self, other: &Wrapping<i32>) -> <Wrapping<i32> as BitXor>::Output

Performs the ^ operation.

impl BitXor<&Wrapping<i64>> for &Wrapping<i64>

type Output = <Wrapping<i64> as BitXor>::Output

The resulting type after applying the ^ operator.

fn bitxor(self, other: &Wrapping<i64>) -> <Wrapping<i64> as BitXor>::Output

Performs the ^ operation.

impl BitXor<&Wrapping<i64>> for Wrapping<i64>

type Output = <Wrapping<i64> as BitXor>::Output

The resulting type after applying the ^ operator.

fn bitxor(self, other: &Wrapping<i64>) -> <Wrapping<i64> as BitXor>::Output

Performs the ^ operation.

impl BitXor<&Wrapping<i8>> for &Wrapping<i8>

type Output = <Wrapping<i8> as BitXor>::Output

The resulting type after applying the ^ operator.

fn bitxor(self, other: &Wrapping<i8>) -> <Wrapping<i8> as BitXor>::Output

Performs the ^ operation.

impl BitXor<&Wrapping<i8>> for Wrapping<i8>

type Output = <Wrapping<i8> as BitXor>::Output

The resulting type after applying the ^ operator.

fn bitxor(self, other: &Wrapping<i8>) -> <Wrapping<i8> as BitXor>::Output

Performs the ^ operation.

impl BitXor<&Wrapping<isize>> for &Wrapping<isize>

type Output = <Wrapping<isize> as BitXor>::Output

The resulting type after applying the ^ operator.

fn bitxor(self, other: &Wrapping<isize>) -> <Wrapping<isize> as BitXor>::Output

Performs the ^ operation.

impl BitXor<&Wrapping<isize>> for Wrapping<isize>

type Output = <Wrapping<isize> as BitXor>::Output

The resulting type after applying the ^ operator.

fn bitxor(self, other: &Wrapping<isize>) -> <Wrapping<isize> as BitXor>::Output

Performs the ^ operation.

impl BitXor<&Wrapping<u128>> for &Wrapping<u128>

type Output = <Wrapping<u128> as BitXor>::Output

The resulting type after applying the ^ operator.

fn bitxor(self, other: &Wrapping<u128>) -> <Wrapping<u128> as BitXor>::Output

Performs the ^ operation.

impl BitXor<&Wrapping<u128>> for Wrapping<u128>

type Output = <Wrapping<u128> as BitXor>::Output

The resulting type after applying the ^ operator.

fn bitxor(self, other: &Wrapping<u128>) -> <Wrapping<u128> as BitXor>::Output

Performs the ^ operation.

impl BitXor<&Wrapping<u16>> for &Wrapping<u16>

type Output = <Wrapping<u16> as BitXor>::Output

The resulting type after applying the ^ operator.

fn bitxor(self, other: &Wrapping<u16>) -> <Wrapping<u16> as BitXor>::Output

Performs the ^ operation.

impl BitXor<&Wrapping<u16>> for Wrapping<u16>

type Output = <Wrapping<u16> as BitXor>::Output

The resulting type after applying the ^ operator.

fn bitxor(self, other: &Wrapping<u16>) -> <Wrapping<u16> as BitXor>::Output

Performs the ^ operation.

impl BitXor<&Wrapping<u32>> for &Wrapping<u32>

type Output = <Wrapping<u32> as BitXor>::Output

The resulting type after applying the ^ operator.

fn bitxor(self, other: &Wrapping<u32>) -> <Wrapping<u32> as BitXor>::Output

Performs the ^ operation.

impl BitXor<&Wrapping<u32>> for Wrapping<u32>

type Output = <Wrapping<u32> as BitXor>::Output

The resulting type after applying the ^ operator.

fn bitxor(self, other: &Wrapping<u32>) -> <Wrapping<u32> as BitXor>::Output

Performs the ^ operation.

impl BitXor<&Wrapping<u64>> for &Wrapping<u64>

type Output = <Wrapping<u64> as BitXor>::Output

The resulting type after applying the ^ operator.

fn bitxor(self, other: &Wrapping<u64>) -> <Wrapping<u64> as BitXor>::Output

Performs the ^ operation.

impl BitXor<&Wrapping<u64>> for Wrapping<u64>

type Output = <Wrapping<u64> as BitXor>::Output

The resulting type after applying the ^ operator.

fn bitxor(self, other: &Wrapping<u64>) -> <Wrapping<u64> as BitXor>::Output

Performs the ^ operation.

impl BitXor<&Wrapping<u8>> for &Wrapping<u8>

type Output = <Wrapping<u8> as BitXor>::Output

The resulting type after applying the ^ operator.

fn bitxor(self, other: &Wrapping<u8>) -> <Wrapping<u8> as BitXor>::Output

Performs the ^ operation.

impl BitXor<&Wrapping<u8>> for Wrapping<u8>

type Output = <Wrapping<u8> as BitXor>::Output

The resulting type after applying the ^ operator.

fn bitxor(self, other: &Wrapping<u8>) -> <Wrapping<u8> as BitXor>::Output

Performs the ^ operation.

impl BitXor<&Wrapping<usize>> for &Wrapping<usize>

type Output = <Wrapping<usize> as BitXor>::Output

The resulting type after applying the ^ operator.

fn bitxor(self, other: &Wrapping<usize>) -> <Wrapping<usize> as BitXor>::Output

Performs the ^ operation.

impl BitXor<&Wrapping<usize>> for Wrapping<usize>

type Output = <Wrapping<usize> as BitXor>::Output

The resulting type after applying the ^ operator.

fn bitxor(self, other: &Wrapping<usize>) -> <Wrapping<usize> as BitXor>::Output

Performs the ^ operation.

impl<'a> BitXor<Wrapping<i128>> for &'a Wrapping<i128>

type Output = <Wrapping<i128> as BitXor>::Output

The resulting type after applying the ^ operator.

fn bitxor(self, other: Wrapping<i128>) -> <Wrapping<i128> as BitXor>::Output

Performs the ^ operation.

impl<'a> BitXor<Wrapping<i16>> for &'a Wrapping<i16>

type Output = <Wrapping<i16> as BitXor>::Output

The resulting type after applying the ^ operator.

fn bitxor(self, other: Wrapping<i16>) -> <Wrapping<i16> as BitXor>::Output

Performs the ^ operation.

impl<'a> BitXor<Wrapping<i32>> for &'a Wrapping<i32>

type Output = <Wrapping<i32> as BitXor>::Output

The resulting type after applying the ^ operator.

fn bitxor(self, other: Wrapping<i32>) -> <Wrapping<i32> as BitXor>::Output

Performs the ^ operation.

impl<'a> BitXor<Wrapping<i64>> for &'a Wrapping<i64>

type Output = <Wrapping<i64> as BitXor>::Output

The resulting type after applying the ^ operator.

fn bitxor(self, other: Wrapping<i64>) -> <Wrapping<i64> as BitXor>::Output

Performs the ^ operation.

impl<'a> BitXor<Wrapping<i8>> for &'a Wrapping<i8>

type Output = <Wrapping<i8> as BitXor>::Output

The resulting type after applying the ^ operator.

fn bitxor(self, other: Wrapping<i8>) -> <Wrapping<i8> as BitXor>::Output

Performs the ^ operation.

impl<'a> BitXor<Wrapping<isize>> for &'a Wrapping<isize>

type Output = <Wrapping<isize> as BitXor>::Output

The resulting type after applying the ^ operator.

fn bitxor(self, other: Wrapping<isize>) -> <Wrapping<isize> as BitXor>::Output

Performs the ^ operation.

impl<'a> BitXor<Wrapping<u128>> for &'a Wrapping<u128>

type Output = <Wrapping<u128> as BitXor>::Output

The resulting type after applying the ^ operator.

fn bitxor(self, other: Wrapping<u128>) -> <Wrapping<u128> as BitXor>::Output

Performs the ^ operation.

impl<'a> BitXor<Wrapping<u16>> for &'a Wrapping<u16>

type Output = <Wrapping<u16> as BitXor>::Output

The resulting type after applying the ^ operator.

fn bitxor(self, other: Wrapping<u16>) -> <Wrapping<u16> as BitXor>::Output

Performs the ^ operation.

impl<'a> BitXor<Wrapping<u32>> for &'a Wrapping<u32>

type Output = <Wrapping<u32> as BitXor>::Output

The resulting type after applying the ^ operator.

fn bitxor(self, other: Wrapping<u32>) -> <Wrapping<u32> as BitXor>::Output

Performs the ^ operation.

impl<'a> BitXor<Wrapping<u64>> for &'a Wrapping<u64>

type Output = <Wrapping<u64> as BitXor>::Output

The resulting type after applying the ^ operator.

fn bitxor(self, other: Wrapping<u64>) -> <Wrapping<u64> as BitXor>::Output

Performs the ^ operation.

impl<'a> BitXor<Wrapping<u8>> for &'a Wrapping<u8>

type Output = <Wrapping<u8> as BitXor>::Output

The resulting type after applying the ^ operator.

fn bitxor(self, other: Wrapping<u8>) -> <Wrapping<u8> as BitXor>::Output

Performs the ^ operation.

impl<'a> BitXor<Wrapping<usize>> for &'a Wrapping<usize>

type Output = <Wrapping<usize> as BitXor>::Output

The resulting type after applying the ^ operator.

fn bitxor(self, other: Wrapping<usize>) -> <Wrapping<usize> as BitXor>::Output

Performs the ^ operation.

impl BitXor for Wrapping<i128>

type Output = Wrapping<i128>

The resulting type after applying the ^ operator.

fn bitxor(self, other: Wrapping<i128>) -> Wrapping<i128>

Performs the ^ operation.

impl BitXor for Wrapping<i16>

type Output = Wrapping<i16>

The resulting type after applying the ^ operator.

fn bitxor(self, other: Wrapping<i16>) -> Wrapping<i16>

Performs the ^ operation.

impl BitXor for Wrapping<i32>

type Output = Wrapping<i32>

The resulting type after applying the ^ operator.

fn bitxor(self, other: Wrapping<i32>) -> Wrapping<i32>

Performs the ^ operation.

impl BitXor for Wrapping<i64>

type Output = Wrapping<i64>

The resulting type after applying the ^ operator.

fn bitxor(self, other: Wrapping<i64>) -> Wrapping<i64>

Performs the ^ operation.

impl BitXor for Wrapping<i8>

type Output = Wrapping<i8>

The resulting type after applying the ^ operator.

fn bitxor(self, other: Wrapping<i8>) -> Wrapping<i8>

Performs the ^ operation.

impl BitXor for Wrapping<isize>

type Output = Wrapping<isize>

The resulting type after applying the ^ operator.

fn bitxor(self, other: Wrapping<isize>) -> Wrapping<isize>

Performs the ^ operation.

impl BitXor for Wrapping<u128>

type Output = Wrapping<u128>

The resulting type after applying the ^ operator.

fn bitxor(self, other: Wrapping<u128>) -> Wrapping<u128>

Performs the ^ operation.

impl BitXor for Wrapping<u16>

type Output = Wrapping<u16>

The resulting type after applying the ^ operator.

fn bitxor(self, other: Wrapping<u16>) -> Wrapping<u16>

Performs the ^ operation.

impl BitXor for Wrapping<u32>

type Output = Wrapping<u32>

The resulting type after applying the ^ operator.

fn bitxor(self, other: Wrapping<u32>) -> Wrapping<u32>

Performs the ^ operation.

impl BitXor for Wrapping<u64>

type Output = Wrapping<u64>

The resulting type after applying the ^ operator.

fn bitxor(self, other: Wrapping<u64>) -> Wrapping<u64>

Performs the ^ operation.

impl BitXor for Wrapping<u8>

type Output = Wrapping<u8>

The resulting type after applying the ^ operator.

fn bitxor(self, other: Wrapping<u8>) -> Wrapping<u8>

Performs the ^ operation.

impl BitXor for Wrapping<usize>

type Output = Wrapping<usize>

The resulting type after applying the ^ operator.

fn bitxor(self, other: Wrapping<usize>) -> Wrapping<usize>

Performs the ^ operation.

impl BitXorAssign<&Wrapping<i128>> for Wrapping<i128>

fn bitxor_assign(&mut self, other: &Wrapping<i128>)

Performs the ^= operation.

impl BitXorAssign<&Wrapping<i16>> for Wrapping<i16>

fn bitxor_assign(&mut self, other: &Wrapping<i16>)

Performs the ^= operation.

impl BitXorAssign<&Wrapping<i32>> for Wrapping<i32>

fn bitxor_assign(&mut self, other: &Wrapping<i32>)

Performs the ^= operation.

impl BitXorAssign<&Wrapping<i64>> for Wrapping<i64>

fn bitxor_assign(&mut self, other: &Wrapping<i64>)

Performs the ^= operation.

impl BitXorAssign<&Wrapping<i8>> for Wrapping<i8>

fn bitxor_assign(&mut self, other: &Wrapping<i8>)

Performs the ^= operation.

impl BitXorAssign<&Wrapping<isize>> for Wrapping<isize>

fn bitxor_assign(&mut self, other: &Wrapping<isize>)

Performs the ^= operation.

impl BitXorAssign<&Wrapping<u128>> for Wrapping<u128>

fn bitxor_assign(&mut self, other: &Wrapping<u128>)

Performs the ^= operation.

impl BitXorAssign<&Wrapping<u16>> for Wrapping<u16>

fn bitxor_assign(&mut self, other: &Wrapping<u16>)

Performs the ^= operation.

impl BitXorAssign<&Wrapping<u32>> for Wrapping<u32>

fn bitxor_assign(&mut self, other: &Wrapping<u32>)

Performs the ^= operation.

impl BitXorAssign<&Wrapping<u64>> for Wrapping<u64>

fn bitxor_assign(&mut self, other: &Wrapping<u64>)

Performs the ^= operation.

impl BitXorAssign<&Wrapping<u8>> for Wrapping<u8>

fn bitxor_assign(&mut self, other: &Wrapping<u8>)

Performs the ^= operation.

impl BitXorAssign<&Wrapping<usize>> for Wrapping<usize>

fn bitxor_assign(&mut self, other: &Wrapping<usize>)

Performs the ^= operation.

impl BitXorAssign<&i128> for Wrapping<i128>

fn bitxor_assign(&mut self, other: &i128)

Performs the ^= operation.

impl BitXorAssign<&i16> for Wrapping<i16>

fn bitxor_assign(&mut self, other: &i16)

Performs the ^= operation.

impl BitXorAssign<&i32> for Wrapping<i32>

fn bitxor_assign(&mut self, other: &i32)

Performs the ^= operation.

impl BitXorAssign<&i64> for Wrapping<i64>

fn bitxor_assign(&mut self, other: &i64)

Performs the ^= operation.

impl BitXorAssign<&i8> for Wrapping<i8>

fn bitxor_assign(&mut self, other: &i8)

Performs the ^= operation.

impl BitXorAssign<&isize> for Wrapping<isize>

fn bitxor_assign(&mut self, other: &isize)

Performs the ^= operation.

impl BitXorAssign<&u128> for Wrapping<u128>

fn bitxor_assign(&mut self, other: &u128)

Performs the ^= operation.

impl BitXorAssign<&u16> for Wrapping<u16>

fn bitxor_assign(&mut self, other: &u16)

Performs the ^= operation.

impl BitXorAssign<&u32> for Wrapping<u32>

fn bitxor_assign(&mut self, other: &u32)

Performs the ^= operation.

impl BitXorAssign<&u64> for Wrapping<u64>

fn bitxor_assign(&mut self, other: &u64)

Performs the ^= operation.

impl BitXorAssign<&u8> for Wrapping<u8>

fn bitxor_assign(&mut self, other: &u8)

Performs the ^= operation.

impl BitXorAssign<&usize> for Wrapping<usize>

fn bitxor_assign(&mut self, other: &usize)

Performs the ^= operation.

impl BitXorAssign<i128> for Wrapping<i128>

fn bitxor_assign(&mut self, other: i128)

Performs the ^= operation.

impl BitXorAssign<i16> for Wrapping<i16>

fn bitxor_assign(&mut self, other: i16)

Performs the ^= operation.

impl BitXorAssign<i32> for Wrapping<i32>

fn bitxor_assign(&mut self, other: i32)

Performs the ^= operation.

impl BitXorAssign<i64> for Wrapping<i64>

fn bitxor_assign(&mut self, other: i64)

Performs the ^= operation.

impl BitXorAssign<i8> for Wrapping<i8>

fn bitxor_assign(&mut self, other: i8)

Performs the ^= operation.

impl BitXorAssign<isize> for Wrapping<isize>

fn bitxor_assign(&mut self, other: isize)

Performs the ^= operation.

impl BitXorAssign<u128> for Wrapping<u128>

fn bitxor_assign(&mut self, other: u128)

Performs the ^= operation.

impl BitXorAssign<u16> for Wrapping<u16>

fn bitxor_assign(&mut self, other: u16)

Performs the ^= operation.

impl BitXorAssign<u32> for Wrapping<u32>

fn bitxor_assign(&mut self, other: u32)

Performs the ^= operation.

impl BitXorAssign<u64> for Wrapping<u64>

fn bitxor_assign(&mut self, other: u64)

Performs the ^= operation.

impl BitXorAssign<u8> for Wrapping<u8>

fn bitxor_assign(&mut self, other: u8)

Performs the ^= operation.

impl BitXorAssign<usize> for Wrapping<usize>

fn bitxor_assign(&mut self, other: usize)

Performs the ^= operation.

impl BitXorAssign for Wrapping<i128>

fn bitxor_assign(&mut self, other: Wrapping<i128>)

Performs the ^= operation.

impl BitXorAssign for Wrapping<i16>

fn bitxor_assign(&mut self, other: Wrapping<i16>)

Performs the ^= operation.

impl BitXorAssign for Wrapping<i32>

fn bitxor_assign(&mut self, other: Wrapping<i32>)

Performs the ^= operation.

impl BitXorAssign for Wrapping<i64>

fn bitxor_assign(&mut self, other: Wrapping<i64>)

Performs the ^= operation.

impl BitXorAssign for Wrapping<i8>

fn bitxor_assign(&mut self, other: Wrapping<i8>)

Performs the ^= operation.

impl BitXorAssign for Wrapping<isize>

fn bitxor_assign(&mut self, other: Wrapping<isize>)

Performs the ^= operation.

impl BitXorAssign for Wrapping<u128>

fn bitxor_assign(&mut self, other: Wrapping<u128>)

Performs the ^= operation.

impl BitXorAssign for Wrapping<u16>

fn bitxor_assign(&mut self, other: Wrapping<u16>)

Performs the ^= operation.

impl BitXorAssign for Wrapping<u32>

fn bitxor_assign(&mut self, other: Wrapping<u32>)

Performs the ^= operation.

impl BitXorAssign for Wrapping<u64>

fn bitxor_assign(&mut self, other: Wrapping<u64>)

Performs the ^= operation.

impl BitXorAssign for Wrapping<u8>

fn bitxor_assign(&mut self, other: Wrapping<u8>)

Performs the ^= operation.

impl BitXorAssign for Wrapping<usize>

fn bitxor_assign(&mut self, other: Wrapping<usize>)

Performs the ^= operation.

impl<T> Clone for Wrapping<T>

where T: Clone,

fn clone(&self) -> Wrapping<T>

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl<T> Debug for Wrapping<T>

where T: Debug,

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.

impl<T> Default for Wrapping<T>

where T: Default,

fn default() -> Wrapping<T>

Returns the “default value” for a type.

impl<T> Display for Wrapping<T>

where T: Display,

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.

impl Div<&Wrapping<i128>> for &Wrapping<i128>

type Output = <Wrapping<i128> as Div>::Output

The resulting type after applying the / operator.

fn div(self, other: &Wrapping<i128>) -> <Wrapping<i128> as Div>::Output

Performs the / operation.

impl Div<&Wrapping<i128>> for Wrapping<i128>

type Output = <Wrapping<i128> as Div>::Output

The resulting type after applying the / operator.

fn div(self, other: &Wrapping<i128>) -> <Wrapping<i128> as Div>::Output

Performs the / operation.

impl Div<&Wrapping<i16>> for &Wrapping<i16>

type Output = <Wrapping<i16> as Div>::Output

The resulting type after applying the / operator.

fn div(self, other: &Wrapping<i16>) -> <Wrapping<i16> as Div>::Output

Performs the / operation.

impl Div<&Wrapping<i16>> for Wrapping<i16>

type Output = <Wrapping<i16> as Div>::Output

The resulting type after applying the / operator.

fn div(self, other: &Wrapping<i16>) -> <Wrapping<i16> as Div>::Output

Performs the / operation.

impl Div<&Wrapping<i32>> for &Wrapping<i32>

type Output = <Wrapping<i32> as Div>::Output

The resulting type after applying the / operator.

fn div(self, other: &Wrapping<i32>) -> <Wrapping<i32> as Div>::Output

Performs the / operation.

impl Div<&Wrapping<i32>> for Wrapping<i32>

type Output = <Wrapping<i32> as Div>::Output

The resulting type after applying the / operator.

fn div(self, other: &Wrapping<i32>) -> <Wrapping<i32> as Div>::Output

Performs the / operation.

impl Div<&Wrapping<i64>> for &Wrapping<i64>

type Output = <Wrapping<i64> as Div>::Output

The resulting type after applying the / operator.

fn div(self, other: &Wrapping<i64>) -> <Wrapping<i64> as Div>::Output

Performs the / operation.

impl Div<&Wrapping<i64>> for Wrapping<i64>

type Output = <Wrapping<i64> as Div>::Output

The resulting type after applying the / operator.

fn div(self, other: &Wrapping<i64>) -> <Wrapping<i64> as Div>::Output

Performs the / operation.

impl Div<&Wrapping<i8>> for &Wrapping<i8>

type Output = <Wrapping<i8> as Div>::Output

The resulting type after applying the / operator.

fn div(self, other: &Wrapping<i8>) -> <Wrapping<i8> as Div>::Output

Performs the / operation.

impl Div<&Wrapping<i8>> for Wrapping<i8>

type Output = <Wrapping<i8> as Div>::Output

The resulting type after applying the / operator.

fn div(self, other: &Wrapping<i8>) -> <Wrapping<i8> as Div>::Output

Performs the / operation.

impl Div<&Wrapping<isize>> for &Wrapping<isize>

type Output = <Wrapping<isize> as Div>::Output

The resulting type after applying the / operator.

fn div(self, other: &Wrapping<isize>) -> <Wrapping<isize> as Div>::Output

Performs the / operation.

impl Div<&Wrapping<isize>> for Wrapping<isize>

type Output = <Wrapping<isize> as Div>::Output

The resulting type after applying the / operator.

fn div(self, other: &Wrapping<isize>) -> <Wrapping<isize> as Div>::Output

Performs the / operation.

impl Div<&Wrapping<u128>> for &Wrapping<u128>

type Output = <Wrapping<u128> as Div>::Output

The resulting type after applying the / operator.

fn div(self, other: &Wrapping<u128>) -> <Wrapping<u128> as Div>::Output

Performs the / operation.

impl Div<&Wrapping<u128>> for Wrapping<u128>

type Output = <Wrapping<u128> as Div>::Output

The resulting type after applying the / operator.

fn div(self, other: &Wrapping<u128>) -> <Wrapping<u128> as Div>::Output

Performs the / operation.

impl Div<&Wrapping<u16>> for &Wrapping<u16>

type Output = <Wrapping<u16> as Div>::Output

The resulting type after applying the / operator.

fn div(self, other: &Wrapping<u16>) -> <Wrapping<u16> as Div>::Output

Performs the / operation.

impl Div<&Wrapping<u16>> for Wrapping<u16>

type Output = <Wrapping<u16> as Div>::Output

The resulting type after applying the / operator.

fn div(self, other: &Wrapping<u16>) -> <Wrapping<u16> as Div>::Output

Performs the / operation.

impl Div<&Wrapping<u32>> for &Wrapping<u32>

type Output = <Wrapping<u32> as Div>::Output

The resulting type after applying the / operator.

fn div(self, other: &Wrapping<u32>) -> <Wrapping<u32> as Div>::Output

Performs the / operation.

impl Div<&Wrapping<u32>> for Wrapping<u32>

type Output = <Wrapping<u32> as Div>::Output

The resulting type after applying the / operator.

fn div(self, other: &Wrapping<u32>) -> <Wrapping<u32> as Div>::Output

Performs the / operation.

impl Div<&Wrapping<u64>> for &Wrapping<u64>

type Output = <Wrapping<u64> as Div>::Output

The resulting type after applying the / operator.

fn div(self, other: &Wrapping<u64>) -> <Wrapping<u64> as Div>::Output

Performs the / operation.

impl Div<&Wrapping<u64>> for Wrapping<u64>

type Output = <Wrapping<u64> as Div>::Output

The resulting type after applying the / operator.

fn div(self, other: &Wrapping<u64>) -> <Wrapping<u64> as Div>::Output

Performs the / operation.

impl Div<&Wrapping<u8>> for &Wrapping<u8>

type Output = <Wrapping<u8> as Div>::Output

The resulting type after applying the / operator.

fn div(self, other: &Wrapping<u8>) -> <Wrapping<u8> as Div>::Output

Performs the / operation.

impl Div<&Wrapping<u8>> for Wrapping<u8>

type Output = <Wrapping<u8> as Div>::Output

The resulting type after applying the / operator.

fn div(self, other: &Wrapping<u8>) -> <Wrapping<u8> as Div>::Output

Performs the / operation.

impl Div<&Wrapping<usize>> for &Wrapping<usize>

type Output = <Wrapping<usize> as Div>::Output

The resulting type after applying the / operator.

fn div(self, other: &Wrapping<usize>) -> <Wrapping<usize> as Div>::Output

Performs the / operation.

impl Div<&Wrapping<usize>> for Wrapping<usize>

type Output = <Wrapping<usize> as Div>::Output

The resulting type after applying the / operator.

fn div(self, other: &Wrapping<usize>) -> <Wrapping<usize> as Div>::Output

Performs the / operation.

impl<'a> Div<Wrapping<i128>> for &'a Wrapping<i128>

type Output = <Wrapping<i128> as Div>::Output

The resulting type after applying the / operator.

fn div(self, other: Wrapping<i128>) -> <Wrapping<i128> as Div>::Output

Performs the / operation.

impl<'a> Div<Wrapping<i16>> for &'a Wrapping<i16>

type Output = <Wrapping<i16> as Div>::Output

The resulting type after applying the / operator.

fn div(self, other: Wrapping<i16>) -> <Wrapping<i16> as Div>::Output

Performs the / operation.

impl<'a> Div<Wrapping<i32>> for &'a Wrapping<i32>

type Output = <Wrapping<i32> as Div>::Output

The resulting type after applying the / operator.

fn div(self, other: Wrapping<i32>) -> <Wrapping<i32> as Div>::Output

Performs the / operation.

impl<'a> Div<Wrapping<i64>> for &'a Wrapping<i64>

type Output = <Wrapping<i64> as Div>::Output

The resulting type after applying the / operator.

fn div(self, other: Wrapping<i64>) -> <Wrapping<i64> as Div>::Output

Performs the / operation.

impl<'a> Div<Wrapping<i8>> for &'a Wrapping<i8>

type Output = <Wrapping<i8> as Div>::Output

The resulting type after applying the / operator.

fn div(self, other: Wrapping<i8>) -> <Wrapping<i8> as Div>::Output

Performs the / operation.

impl<'a> Div<Wrapping<isize>> for &'a Wrapping<isize>

type Output = <Wrapping<isize> as Div>::Output

The resulting type after applying the / operator.

fn div(self, other: Wrapping<isize>) -> <Wrapping<isize> as Div>::Output

Performs the / operation.

impl<'a> Div<Wrapping<u128>> for &'a Wrapping<u128>

type Output = <Wrapping<u128> as Div>::Output

The resulting type after applying the / operator.

fn div(self, other: Wrapping<u128>) -> <Wrapping<u128> as Div>::Output

Performs the / operation.

impl<'a> Div<Wrapping<u16>> for &'a Wrapping<u16>

type Output = <Wrapping<u16> as Div>::Output

The resulting type after applying the / operator.

fn div(self, other: Wrapping<u16>) -> <Wrapping<u16> as Div>::Output

Performs the / operation.

impl<'a> Div<Wrapping<u32>> for &'a Wrapping<u32>

type Output = <Wrapping<u32> as Div>::Output

The resulting type after applying the / operator.

fn div(self, other: Wrapping<u32>) -> <Wrapping<u32> as Div>::Output

Performs the / operation.

impl<'a> Div<Wrapping<u64>> for &'a Wrapping<u64>

type Output = <Wrapping<u64> as Div>::Output

The resulting type after applying the / operator.

fn div(self, other: Wrapping<u64>) -> <Wrapping<u64> as Div>::Output

Performs the / operation.

impl<'a> Div<Wrapping<u8>> for &'a Wrapping<u8>

type Output = <Wrapping<u8> as Div>::Output

The resulting type after applying the / operator.

fn div(self, other: Wrapping<u8>) -> <Wrapping<u8> as Div>::Output

Performs the / operation.

impl<'a> Div<Wrapping<usize>> for &'a Wrapping<usize>

type Output = <Wrapping<usize> as Div>::Output

The resulting type after applying the / operator.

fn div(self, other: Wrapping<usize>) -> <Wrapping<usize> as Div>::Output

Performs the / operation.

impl Div for Wrapping<i128>

type Output = Wrapping<i128>

The resulting type after applying the / operator.

fn div(self, other: Wrapping<i128>) -> Wrapping<i128>

Performs the / operation.

impl Div for Wrapping<i16>

type Output = Wrapping<i16>

The resulting type after applying the / operator.

fn div(self, other: Wrapping<i16>) -> Wrapping<i16>

Performs the / operation.

impl Div for Wrapping<i32>

type Output = Wrapping<i32>

The resulting type after applying the / operator.

fn div(self, other: Wrapping<i32>) -> Wrapping<i32>

Performs the / operation.

impl Div for Wrapping<i64>

type Output = Wrapping<i64>

The resulting type after applying the / operator.

fn div(self, other: Wrapping<i64>) -> Wrapping<i64>

Performs the / operation.

impl Div for Wrapping<i8>

type Output = Wrapping<i8>

The resulting type after applying the / operator.

fn div(self, other: Wrapping<i8>) -> Wrapping<i8>

Performs the / operation.

impl Div for Wrapping<isize>

type Output = Wrapping<isize>

The resulting type after applying the / operator.

fn div(self, other: Wrapping<isize>) -> Wrapping<isize>

Performs the / operation.

impl Div for Wrapping<u128>

type Output = Wrapping<u128>

The resulting type after applying the / operator.

fn div(self, other: Wrapping<u128>) -> Wrapping<u128>

Performs the / operation.

impl Div for Wrapping<u16>

type Output = Wrapping<u16>

The resulting type after applying the / operator.

fn div(self, other: Wrapping<u16>) -> Wrapping<u16>

Performs the / operation.

impl Div for Wrapping<u32>

type Output = Wrapping<u32>

The resulting type after applying the / operator.

fn div(self, other: Wrapping<u32>) -> Wrapping<u32>

Performs the / operation.

impl Div for Wrapping<u64>

type Output = Wrapping<u64>

The resulting type after applying the / operator.

fn div(self, other: Wrapping<u64>) -> Wrapping<u64>

Performs the / operation.

impl Div for Wrapping<u8>

type Output = Wrapping<u8>

The resulting type after applying the / operator.

fn div(self, other: Wrapping<u8>) -> Wrapping<u8>

Performs the / operation.

impl Div for Wrapping<usize>

type Output = Wrapping<usize>

The resulting type after applying the / operator.

fn div(self, other: Wrapping<usize>) -> Wrapping<usize>

Performs the / operation.

impl DivAssign<&Wrapping<i128>> for Wrapping<i128>

fn div_assign(&mut self, other: &Wrapping<i128>)

Performs the /= operation.

impl DivAssign<&Wrapping<i16>> for Wrapping<i16>

fn div_assign(&mut self, other: &Wrapping<i16>)

Performs the /= operation.

impl DivAssign<&Wrapping<i32>> for Wrapping<i32>

fn div_assign(&mut self, other: &Wrapping<i32>)

Performs the /= operation.

impl DivAssign<&Wrapping<i64>> for Wrapping<i64>

fn div_assign(&mut self, other: &Wrapping<i64>)

Performs the /= operation.

impl DivAssign<&Wrapping<i8>> for Wrapping<i8>

fn div_assign(&mut self, other: &Wrapping<i8>)

Performs the /= operation.

impl DivAssign<&Wrapping<isize>> for Wrapping<isize>

fn div_assign(&mut self, other: &Wrapping<isize>)

Performs the /= operation.

impl DivAssign<&Wrapping<u128>> for Wrapping<u128>

fn div_assign(&mut self, other: &Wrapping<u128>)

Performs the /= operation.

impl DivAssign<&Wrapping<u16>> for Wrapping<u16>

fn div_assign(&mut self, other: &Wrapping<u16>)

Performs the /= operation.

impl DivAssign<&Wrapping<u32>> for Wrapping<u32>

fn div_assign(&mut self, other: &Wrapping<u32>)

Performs the /= operation.

impl DivAssign<&Wrapping<u64>> for Wrapping<u64>

fn div_assign(&mut self, other: &Wrapping<u64>)

Performs the /= operation.

impl DivAssign<&Wrapping<u8>> for Wrapping<u8>

fn div_assign(&mut self, other: &Wrapping<u8>)

Performs the /= operation.

impl DivAssign<&Wrapping<usize>> for Wrapping<usize>

fn div_assign(&mut self, other: &Wrapping<usize>)

Performs the /= operation.

impl DivAssign<&i128> for Wrapping<i128>

fn div_assign(&mut self, other: &i128)

Performs the /= operation.

impl DivAssign<&i16> for Wrapping<i16>

fn div_assign(&mut self, other: &i16)

Performs the /= operation.

impl DivAssign<&i32> for Wrapping<i32>

fn div_assign(&mut self, other: &i32)

Performs the /= operation.

impl DivAssign<&i64> for Wrapping<i64>

fn div_assign(&mut self, other: &i64)

Performs the /= operation.

impl DivAssign<&i8> for Wrapping<i8>

fn div_assign(&mut self, other: &i8)

Performs the /= operation.

impl DivAssign<&isize> for Wrapping<isize>

fn div_assign(&mut self, other: &isize)

Performs the /= operation.

impl DivAssign<&u128> for Wrapping<u128>

fn div_assign(&mut self, other: &u128)

Performs the /= operation.

impl DivAssign<&u16> for Wrapping<u16>

fn div_assign(&mut self, other: &u16)

Performs the /= operation.

impl DivAssign<&u32> for Wrapping<u32>

fn div_assign(&mut self, other: &u32)

Performs the /= operation.

impl DivAssign<&u64> for Wrapping<u64>

fn div_assign(&mut self, other: &u64)

Performs the /= operation.

impl DivAssign<&u8> for Wrapping<u8>

fn div_assign(&mut self, other: &u8)

Performs the /= operation.

impl DivAssign<&usize> for Wrapping<usize>

fn div_assign(&mut self, other: &usize)

Performs the /= operation.

impl DivAssign<i128> for Wrapping<i128>

fn div_assign(&mut self, other: i128)

Performs the /= operation.

impl DivAssign<i16> for Wrapping<i16>

fn div_assign(&mut self, other: i16)

Performs the /= operation.

impl DivAssign<i32> for Wrapping<i32>

fn div_assign(&mut self, other: i32)

Performs the /= operation.

impl DivAssign<i64> for Wrapping<i64>

fn div_assign(&mut self, other: i64)

Performs the /= operation.

impl DivAssign<i8> for Wrapping<i8>

fn div_assign(&mut self, other: i8)

Performs the /= operation.

impl DivAssign<isize> for Wrapping<isize>

fn div_assign(&mut self, other: isize)

Performs the /= operation.

impl DivAssign<u128> for Wrapping<u128>

fn div_assign(&mut self, other: u128)

Performs the /= operation.

impl DivAssign<u16> for Wrapping<u16>

fn div_assign(&mut self, other: u16)

Performs the /= operation.

impl DivAssign<u32> for Wrapping<u32>

fn div_assign(&mut self, other: u32)

Performs the /= operation.

impl DivAssign<u64> for Wrapping<u64>

fn div_assign(&mut self, other: u64)

Performs the /= operation.

impl DivAssign<u8> for Wrapping<u8>

fn div_assign(&mut self, other: u8)

Performs the /= operation.

impl DivAssign<usize> for Wrapping<usize>

fn div_assign(&mut self, other: usize)

Performs the /= operation.

impl DivAssign for Wrapping<i128>

fn div_assign(&mut self, other: Wrapping<i128>)

Performs the /= operation.

impl DivAssign for Wrapping<i16>

fn div_assign(&mut self, other: Wrapping<i16>)

Performs the /= operation.

impl DivAssign for Wrapping<i32>

fn div_assign(&mut self, other: Wrapping<i32>)

Performs the /= operation.

impl DivAssign for Wrapping<i64>

fn div_assign(&mut self, other: Wrapping<i64>)

Performs the /= operation.

impl DivAssign for Wrapping<i8>

fn div_assign(&mut self, other: Wrapping<i8>)

Performs the /= operation.

impl DivAssign for Wrapping<isize>

fn div_assign(&mut self, other: Wrapping<isize>)

Performs the /= operation.

impl DivAssign for Wrapping<u128>

fn div_assign(&mut self, other: Wrapping<u128>)

Performs the /= operation.

impl DivAssign for Wrapping<u16>

fn div_assign(&mut self, other: Wrapping<u16>)

Performs the /= operation.

impl DivAssign for Wrapping<u32>

fn div_assign(&mut self, other: Wrapping<u32>)

Performs the /= operation.

impl DivAssign for Wrapping<u64>

fn div_assign(&mut self, other: Wrapping<u64>)

Performs the /= operation.

impl DivAssign for Wrapping<u8>

fn div_assign(&mut self, other: Wrapping<u8>)

Performs the /= operation.

impl DivAssign for Wrapping<usize>

fn div_assign(&mut self, other: Wrapping<usize>)

Performs the /= operation.

impl<T> Hash for Wrapping<T>

where T: Hash,

fn hash<__H>(&self, state: &mut __H)

where __H: Hasher,

Feeds this value into the given Hasher.

fn hash_slice<H>(data: &[Self], state: &mut H)

where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher.

impl<T> LowerHex for Wrapping<T>

where T: LowerHex,

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.

impl Mul<&Wrapping<i128>> for &Wrapping<i128>

type Output = <Wrapping<i128> as Mul>::Output

The resulting type after applying the * operator.

fn mul(self, other: &Wrapping<i128>) -> <Wrapping<i128> as Mul>::Output

Performs the * operation.

impl Mul<&Wrapping<i128>> for Wrapping<i128>

type Output = <Wrapping<i128> as Mul>::Output

The resulting type after applying the * operator.

fn mul(self, other: &Wrapping<i128>) -> <Wrapping<i128> as Mul>::Output

Performs the * operation.

impl Mul<&Wrapping<i16>> for &Wrapping<i16>

type Output = <Wrapping<i16> as Mul>::Output

The resulting type after applying the * operator.

fn mul(self, other: &Wrapping<i16>) -> <Wrapping<i16> as Mul>::Output

Performs the * operation.

impl Mul<&Wrapping<i16>> for Wrapping<i16>

type Output = <Wrapping<i16> as Mul>::Output

The resulting type after applying the * operator.

fn mul(self, other: &Wrapping<i16>) -> <Wrapping<i16> as Mul>::Output

Performs the * operation.

impl Mul<&Wrapping<i32>> for &Wrapping<i32>

type Output = <Wrapping<i32> as Mul>::Output

The resulting type after applying the * operator.

fn mul(self, other: &Wrapping<i32>) -> <Wrapping<i32> as Mul>::Output

Performs the * operation.

impl Mul<&Wrapping<i32>> for Wrapping<i32>

type Output = <Wrapping<i32> as Mul>::Output

The resulting type after applying the * operator.

fn mul(self, other: &Wrapping<i32>) -> <Wrapping<i32> as Mul>::Output

Performs the * operation.

impl Mul<&Wrapping<i64>> for &Wrapping<i64>

type Output = <Wrapping<i64> as Mul>::Output

The resulting type after applying the * operator.

fn mul(self, other: &Wrapping<i64>) -> <Wrapping<i64> as Mul>::Output

Performs the * operation.

impl Mul<&Wrapping<i64>> for Wrapping<i64>

type Output = <Wrapping<i64> as Mul>::Output

The resulting type after applying the * operator.

fn mul(self, other: &Wrapping<i64>) -> <Wrapping<i64> as Mul>::Output

Performs the * operation.

impl Mul<&Wrapping<i8>> for &Wrapping<i8>

type Output = <Wrapping<i8> as Mul>::Output

The resulting type after applying the * operator.

fn mul(self, other: &Wrapping<i8>) -> <Wrapping<i8> as Mul>::Output

Performs the * operation.

impl Mul<&Wrapping<i8>> for Wrapping<i8>

type Output = <Wrapping<i8> as Mul>::Output

The resulting type after applying the * operator.

fn mul(self, other: &Wrapping<i8>) -> <Wrapping<i8> as Mul>::Output

Performs the * operation.

impl Mul<&Wrapping<isize>> for &Wrapping<isize>

type Output = <Wrapping<isize> as Mul>::Output

The resulting type after applying the * operator.

fn mul(self, other: &Wrapping<isize>) -> <Wrapping<isize> as Mul>::Output

Performs the * operation.

impl Mul<&Wrapping<isize>> for Wrapping<isize>

type Output = <Wrapping<isize> as Mul>::Output

The resulting type after applying the * operator.

fn mul(self, other: &Wrapping<isize>) -> <Wrapping<isize> as Mul>::Output

Performs the * operation.

impl Mul<&Wrapping<u128>> for &Wrapping<u128>

type Output = <Wrapping<u128> as Mul>::Output

The resulting type after applying the * operator.

fn mul(self, other: &Wrapping<u128>) -> <Wrapping<u128> as Mul>::Output

Performs the * operation.

impl Mul<&Wrapping<u128>> for Wrapping<u128>

type Output = <Wrapping<u128> as Mul>::Output

The resulting type after applying the * operator.

fn mul(self, other: &Wrapping<u128>) -> <Wrapping<u128> as Mul>::Output

Performs the * operation.

impl Mul<&Wrapping<u16>> for &Wrapping<u16>

type Output = <Wrapping<u16> as Mul>::Output

The resulting type after applying the * operator.

fn mul(self, other: &Wrapping<u16>) -> <Wrapping<u16> as Mul>::Output

Performs the * operation.

impl Mul<&Wrapping<u16>> for Wrapping<u16>

type Output = <Wrapping<u16> as Mul>::Output

The resulting type after applying the * operator.

fn mul(self, other: &Wrapping<u16>) -> <Wrapping<u16> as Mul>::Output

Performs the * operation.

impl Mul<&Wrapping<u32>> for &Wrapping<u32>

type Output = <Wrapping<u32> as Mul>::Output

The resulting type after applying the * operator.

fn mul(self, other: &Wrapping<u32>) -> <Wrapping<u32> as Mul>::Output

Performs the * operation.

impl Mul<&Wrapping<u32>> for Wrapping<u32>

type Output = <Wrapping<u32> as Mul>::Output

The resulting type after applying the * operator.

fn mul(self, other: &Wrapping<u32>) -> <Wrapping<u32> as Mul>::Output

Performs the * operation.

impl Mul<&Wrapping<u64>> for &Wrapping<u64>

type Output = <Wrapping<u64> as Mul>::Output

The resulting type after applying the * operator.

fn mul(self, other: &Wrapping<u64>) -> <Wrapping<u64> as Mul>::Output

Performs the * operation.

impl Mul<&Wrapping<u64>> for Wrapping<u64>

type Output = <Wrapping<u64> as Mul>::Output

The resulting type after applying the * operator.

fn mul(self, other: &Wrapping<u64>) -> <Wrapping<u64> as Mul>::Output

Performs the * operation.

impl Mul<&Wrapping<u8>> for &Wrapping<u8>

type Output = <Wrapping<u8> as Mul>::Output

The resulting type after applying the * operator.

fn mul(self, other: &Wrapping<u8>) -> <Wrapping<u8> as Mul>::Output

Performs the * operation.

impl Mul<&Wrapping<u8>> for Wrapping<u8>

type Output = <Wrapping<u8> as Mul>::Output

The resulting type after applying the * operator.

fn mul(self, other: &Wrapping<u8>) -> <Wrapping<u8> as Mul>::Output

Performs the * operation.

impl Mul<&Wrapping<usize>> for &Wrapping<usize>

type Output = <Wrapping<usize> as Mul>::Output

The resulting type after applying the * operator.

fn mul(self, other: &Wrapping<usize>) -> <Wrapping<usize> as Mul>::Output

Performs the * operation.

impl Mul<&Wrapping<usize>> for Wrapping<usize>

type Output = <Wrapping<usize> as Mul>::Output

The resulting type after applying the * operator.

fn mul(self, other: &Wrapping<usize>) -> <Wrapping<usize> as Mul>::Output

Performs the * operation.

impl<'a> Mul<Wrapping<i128>> for &'a Wrapping<i128>

type Output = <Wrapping<i128> as Mul>::Output

The resulting type after applying the * operator.

fn mul(self, other: Wrapping<i128>) -> <Wrapping<i128> as Mul>::Output

Performs the * operation.

impl<'a> Mul<Wrapping<i16>> for &'a Wrapping<i16>

type Output = <Wrapping<i16> as Mul>::Output

The resulting type after applying the * operator.

fn mul(self, other: Wrapping<i16>) -> <Wrapping<i16> as Mul>::Output

Performs the * operation.

impl<'a> Mul<Wrapping<i32>> for &'a Wrapping<i32>

type Output = <Wrapping<i32> as Mul>::Output

The resulting type after applying the * operator.

fn mul(self, other: Wrapping<i32>) -> <Wrapping<i32> as Mul>::Output

Performs the * operation.

impl<'a> Mul<Wrapping<i64>> for &'a Wrapping<i64>

type Output = <Wrapping<i64> as Mul>::Output

The resulting type after applying the * operator.

fn mul(self, other: Wrapping<i64>) -> <Wrapping<i64> as Mul>::Output

Performs the * operation.

impl<'a> Mul<Wrapping<i8>> for &'a Wrapping<i8>

type Output = <Wrapping<i8> as Mul>::Output

The resulting type after applying the * operator.

fn mul(self, other: Wrapping<i8>) -> <Wrapping<i8> as Mul>::Output

Performs the * operation.

impl<'a> Mul<Wrapping<isize>> for &'a Wrapping<isize>

type Output = <Wrapping<isize> as Mul>::Output

The resulting type after applying the * operator.

fn mul(self, other: Wrapping<isize>) -> <Wrapping<isize> as Mul>::Output

Performs the * operation.

impl<'a> Mul<Wrapping<u128>> for &'a Wrapping<u128>

type Output = <Wrapping<u128> as Mul>::Output

The resulting type after applying the * operator.

fn mul(self, other: Wrapping<u128>) -> <Wrapping<u128> as Mul>::Output

Performs the * operation.

impl<'a> Mul<Wrapping<u16>> for &'a Wrapping<u16>

type Output = <Wrapping<u16> as Mul>::Output

The resulting type after applying the * operator.

fn mul(self, other: Wrapping<u16>) -> <Wrapping<u16> as Mul>::Output

Performs the * operation.

impl<'a> Mul<Wrapping<u32>> for &'a Wrapping<u32>

type Output = <Wrapping<u32> as Mul>::Output

The resulting type after applying the * operator.

fn mul(self, other: Wrapping<u32>) -> <Wrapping<u32> as Mul>::Output

Performs the * operation.

impl<'a> Mul<Wrapping<u64>> for &'a Wrapping<u64>

type Output = <Wrapping<u64> as Mul>::Output

The resulting type after applying the * operator.

fn mul(self, other: Wrapping<u64>) -> <Wrapping<u64> as Mul>::Output

Performs the * operation.

impl<'a> Mul<Wrapping<u8>> for &'a Wrapping<u8>

type Output = <Wrapping<u8> as Mul>::Output

The resulting type after applying the * operator.

fn mul(self, other: Wrapping<u8>) -> <Wrapping<u8> as Mul>::Output

Performs the * operation.

impl<'a> Mul<Wrapping<usize>> for &'a Wrapping<usize>

type Output = <Wrapping<usize> as Mul>::Output

The resulting type after applying the * operator.

fn mul(self, other: Wrapping<usize>) -> <Wrapping<usize> as Mul>::Output

Performs the * operation.

impl Mul for Wrapping<i128>

type Output = Wrapping<i128>

The resulting type after applying the * operator.

fn mul(self, other: Wrapping<i128>) -> Wrapping<i128>

Performs the * operation.

impl Mul for Wrapping<i16>

type Output = Wrapping<i16>

The resulting type after applying the * operator.

fn mul(self, other: Wrapping<i16>) -> Wrapping<i16>

Performs the * operation.

impl Mul for Wrapping<i32>

type Output = Wrapping<i32>

The resulting type after applying the * operator.

fn mul(self, other: Wrapping<i32>) -> Wrapping<i32>

Performs the * operation.

impl Mul for Wrapping<i64>

type Output = Wrapping<i64>

The resulting type after applying the * operator.

fn mul(self, other: Wrapping<i64>) -> Wrapping<i64>

Performs the * operation.

impl Mul for Wrapping<i8>

type Output = Wrapping<i8>

The resulting type after applying the * operator.

fn mul(self, other: Wrapping<i8>) -> Wrapping<i8>

Performs the * operation.

impl Mul for Wrapping<isize>

type Output = Wrapping<isize>

The resulting type after applying the * operator.

fn mul(self, other: Wrapping<isize>) -> Wrapping<isize>

Performs the * operation.

impl Mul for Wrapping<u128>

type Output = Wrapping<u128>

The resulting type after applying the * operator.

fn mul(self, other: Wrapping<u128>) -> Wrapping<u128>

Performs the * operation.

impl Mul for Wrapping<u16>

type Output = Wrapping<u16>

The resulting type after applying the * operator.

fn mul(self, other: Wrapping<u16>) -> Wrapping<u16>

Performs the * operation.

impl Mul for Wrapping<u32>

type Output = Wrapping<u32>

The resulting type after applying the * operator.

fn mul(self, other: Wrapping<u32>) -> Wrapping<u32>

Performs the * operation.

impl Mul for Wrapping<u64>

type Output = Wrapping<u64>

The resulting type after applying the * operator.

fn mul(self, other: Wrapping<u64>) -> Wrapping<u64>

Performs the * operation.

impl Mul for Wrapping<u8>

type Output = Wrapping<u8>

The resulting type after applying the * operator.

fn mul(self, other: Wrapping<u8>) -> Wrapping<u8>

Performs the * operation.

impl Mul for Wrapping<usize>

type Output = Wrapping<usize>

The resulting type after applying the * operator.

fn mul(self, other: Wrapping<usize>) -> Wrapping<usize>

Performs the * operation.

impl MulAssign<&Wrapping<i128>> for Wrapping<i128>

fn mul_assign(&mut self, other: &Wrapping<i128>)

Performs the *= operation.

impl MulAssign<&Wrapping<i16>> for Wrapping<i16>

fn mul_assign(&mut self, other: &Wrapping<i16>)

Performs the *= operation.

impl MulAssign<&Wrapping<i32>> for Wrapping<i32>

fn mul_assign(&mut self, other: &Wrapping<i32>)

Performs the *= operation.

impl MulAssign<&Wrapping<i64>> for Wrapping<i64>

fn mul_assign(&mut self, other: &Wrapping<i64>)

Performs the *= operation.

impl MulAssign<&Wrapping<i8>> for Wrapping<i8>

fn mul_assign(&mut self, other: &Wrapping<i8>)

Performs the *= operation.

impl MulAssign<&Wrapping<isize>> for Wrapping<isize>

fn mul_assign(&mut self, other: &Wrapping<isize>)

Performs the *= operation.

impl MulAssign<&Wrapping<u128>> for Wrapping<u128>

fn mul_assign(&mut self, other: &Wrapping<u128>)

Performs the *= operation.

impl MulAssign<&Wrapping<u16>> for Wrapping<u16>

fn mul_assign(&mut self, other: &Wrapping<u16>)

Performs the *= operation.

impl MulAssign<&Wrapping<u32>> for Wrapping<u32>

fn mul_assign(&mut self, other: &Wrapping<u32>)

Performs the *= operation.

impl MulAssign<&Wrapping<u64>> for Wrapping<u64>

fn mul_assign(&mut self, other: &Wrapping<u64>)

Performs the *= operation.

impl MulAssign<&Wrapping<u8>> for Wrapping<u8>

fn mul_assign(&mut self, other: &Wrapping<u8>)

Performs the *= operation.

impl MulAssign<&Wrapping<usize>> for Wrapping<usize>

fn mul_assign(&mut self, other: &Wrapping<usize>)

Performs the *= operation.

impl MulAssign<&i128> for Wrapping<i128>

fn mul_assign(&mut self, other: &i128)

Performs the *= operation.

impl MulAssign<&i16> for Wrapping<i16>

fn mul_assign(&mut self, other: &i16)

Performs the *= operation.

impl MulAssign<&i32> for Wrapping<i32>

fn mul_assign(&mut self, other: &i32)

Performs the *= operation.

impl MulAssign<&i64> for Wrapping<i64>

fn mul_assign(&mut self, other: &i64)

Performs the *= operation.

impl MulAssign<&i8> for Wrapping<i8>

fn mul_assign(&mut self, other: &i8)

Performs the *= operation.

impl MulAssign<&isize> for Wrapping<isize>

fn mul_assign(&mut self, other: &isize)

Performs the *= operation.

impl MulAssign<&u128> for Wrapping<u128>

fn mul_assign(&mut self, other: &u128)

Performs the *= operation.

impl MulAssign<&u16> for Wrapping<u16>

fn mul_assign(&mut self, other: &u16)

Performs the *= operation.

impl MulAssign<&u32> for Wrapping<u32>

fn mul_assign(&mut self, other: &u32)

Performs the *= operation.

impl MulAssign<&u64> for Wrapping<u64>

fn mul_assign(&mut self, other: &u64)

Performs the *= operation.

impl MulAssign<&u8> for Wrapping<u8>

fn mul_assign(&mut self, other: &u8)

Performs the *= operation.

impl MulAssign<&usize> for Wrapping<usize>

fn mul_assign(&mut self, other: &usize)

Performs the *= operation.

impl MulAssign<i128> for Wrapping<i128>

fn mul_assign(&mut self, other: i128)

Performs the *= operation.

impl MulAssign<i16> for Wrapping<i16>

fn mul_assign(&mut self, other: i16)

Performs the *= operation.

impl MulAssign<i32> for Wrapping<i32>

fn mul_assign(&mut self, other: i32)

Performs the *= operation.

impl MulAssign<i64> for Wrapping<i64>

fn mul_assign(&mut self, other: i64)

Performs the *= operation.

impl MulAssign<i8> for Wrapping<i8>

fn mul_assign(&mut self, other: i8)

Performs the *= operation.

impl MulAssign<isize> for Wrapping<isize>

fn mul_assign(&mut self, other: isize)

Performs the *= operation.

impl MulAssign<u128> for Wrapping<u128>

fn mul_assign(&mut self, other: u128)

Performs the *= operation.

impl MulAssign<u16> for Wrapping<u16>

fn mul_assign(&mut self, other: u16)

Performs the *= operation.

impl MulAssign<u32> for Wrapping<u32>

fn mul_assign(&mut self, other: u32)

Performs the *= operation.

impl MulAssign<u64> for Wrapping<u64>

fn mul_assign(&mut self, other: u64)

Performs the *= operation.

impl MulAssign<u8> for Wrapping<u8>

fn mul_assign(&mut self, other: u8)

Performs the *= operation.

impl MulAssign<usize> for Wrapping<usize>

fn mul_assign(&mut self, other: usize)

Performs the *= operation.

impl MulAssign for Wrapping<i128>

fn mul_assign(&mut self, other: Wrapping<i128>)

Performs the *= operation.

impl MulAssign for Wrapping<i16>

fn mul_assign(&mut self, other: Wrapping<i16>)

Performs the *= operation.

impl MulAssign for Wrapping<i32>

fn mul_assign(&mut self, other: Wrapping<i32>)

Performs the *= operation.

impl MulAssign for Wrapping<i64>

fn mul_assign(&mut self, other: Wrapping<i64>)

Performs the *= operation.

impl MulAssign for Wrapping<i8>

fn mul_assign(&mut self, other: Wrapping<i8>)

Performs the *= operation.

impl MulAssign for Wrapping<isize>

fn mul_assign(&mut self, other: Wrapping<isize>)

Performs the *= operation.

impl MulAssign for Wrapping<u128>

fn mul_assign(&mut self, other: Wrapping<u128>)

Performs the *= operation.

impl MulAssign for Wrapping<u16>

fn mul_assign(&mut self, other: Wrapping<u16>)

Performs the *= operation.

impl MulAssign for Wrapping<u32>

fn mul_assign(&mut self, other: Wrapping<u32>)

Performs the *= operation.

impl MulAssign for Wrapping<u64>

fn mul_assign(&mut self, other: Wrapping<u64>)

Performs the *= operation.

impl MulAssign for Wrapping<u8>

fn mul_assign(&mut self, other: Wrapping<u8>)

Performs the *= operation.

impl MulAssign for Wrapping<usize>

fn mul_assign(&mut self, other: Wrapping<usize>)

Performs the *= operation.

impl Neg for &Wrapping<i128>

type Output = <Wrapping<i128> as Neg>::Output

The resulting type after applying the - operator.

fn neg(self) -> <Wrapping<i128> as Neg>::Output

Performs the unary - operation.

impl Neg for &Wrapping<i16>

type Output = <Wrapping<i16> as Neg>::Output

The resulting type after applying the - operator.

fn neg(self) -> <Wrapping<i16> as Neg>::Output

Performs the unary - operation.

impl Neg for &Wrapping<i32>

type Output = <Wrapping<i32> as Neg>::Output

The resulting type after applying the - operator.

fn neg(self) -> <Wrapping<i32> as Neg>::Output

Performs the unary - operation.

impl Neg for &Wrapping<i64>

type Output = <Wrapping<i64> as Neg>::Output

The resulting type after applying the - operator.

fn neg(self) -> <Wrapping<i64> as Neg>::Output

Performs the unary - operation.

impl Neg for &Wrapping<i8>

type Output = <Wrapping<i8> as Neg>::Output

The resulting type after applying the - operator.

fn neg(self) -> <Wrapping<i8> as Neg>::Output

Performs the unary - operation.

impl Neg for &Wrapping<isize>

type Output = <Wrapping<isize> as Neg>::Output

The resulting type after applying the - operator.

fn neg(self) -> <Wrapping<isize> as Neg>::Output

Performs the unary - operation.

impl Neg for &Wrapping<u128>

type Output = <Wrapping<u128> as Neg>::Output

The resulting type after applying the - operator.

fn neg(self) -> <Wrapping<u128> as Neg>::Output

Performs the unary - operation.

impl Neg for &Wrapping<u16>

type Output = <Wrapping<u16> as Neg>::Output

The resulting type after applying the - operator.

fn neg(self) -> <Wrapping<u16> as Neg>::Output

Performs the unary - operation.

impl Neg for &Wrapping<u32>

type Output = <Wrapping<u32> as Neg>::Output

The resulting type after applying the - operator.

fn neg(self) -> <Wrapping<u32> as Neg>::Output

Performs the unary - operation.

impl Neg for &Wrapping<u64>

type Output = <Wrapping<u64> as Neg>::Output

The resulting type after applying the - operator.

fn neg(self) -> <Wrapping<u64> as Neg>::Output

Performs the unary - operation.

impl Neg for &Wrapping<u8>

type Output = <Wrapping<u8> as Neg>::Output

The resulting type after applying the - operator.

fn neg(self) -> <Wrapping<u8> as Neg>::Output

Performs the unary - operation.

impl Neg for &Wrapping<usize>

type Output = <Wrapping<usize> as Neg>::Output

The resulting type after applying the - operator.

fn neg(self) -> <Wrapping<usize> as Neg>::Output

Performs the unary - operation.

impl Neg for Wrapping<i128>

type Output = Wrapping<i128>

The resulting type after applying the - operator.

fn neg(self) -> Wrapping<i128>

Performs the unary - operation.

impl Neg for Wrapping<i16>

type Output = Wrapping<i16>

The resulting type after applying the - operator.

fn neg(self) -> Wrapping<i16>

Performs the unary - operation.

impl Neg for Wrapping<i32>

type Output = Wrapping<i32>

The resulting type after applying the - operator.

fn neg(self) -> Wrapping<i32>

Performs the unary - operation.

impl Neg for Wrapping<i64>

type Output = Wrapping<i64>

The resulting type after applying the - operator.

fn neg(self) -> Wrapping<i64>

Performs the unary - operation.

impl Neg for Wrapping<i8>

type Output = Wrapping<i8>

The resulting type after applying the - operator.

fn neg(self) -> Wrapping<i8>

Performs the unary - operation.

impl Neg for Wrapping<isize>

type Output = Wrapping<isize>

The resulting type after applying the - operator.

fn neg(self) -> Wrapping<isize>

Performs the unary - operation.

impl Neg for Wrapping<u128>

type Output = Wrapping<u128>

The resulting type after applying the - operator.

fn neg(self) -> Wrapping<u128>

Performs the unary - operation.

impl Neg for Wrapping<u16>

type Output = Wrapping<u16>

The resulting type after applying the - operator.

fn neg(self) -> Wrapping<u16>

Performs the unary - operation.

impl Neg for Wrapping<u32>

type Output = Wrapping<u32>

The resulting type after applying the - operator.

fn neg(self) -> Wrapping<u32>

Performs the unary - operation.

impl Neg for Wrapping<u64>

type Output = Wrapping<u64>

The resulting type after applying the - operator.

fn neg(self) -> Wrapping<u64>

Performs the unary - operation.

impl Neg for Wrapping<u8>

type Output = Wrapping<u8>

The resulting type after applying the - operator.

fn neg(self) -> Wrapping<u8>

Performs the unary - operation.

impl Neg for Wrapping<usize>

type Output = Wrapping<usize>

The resulting type after applying the - operator.

fn neg(self) -> Wrapping<usize>

Performs the unary - operation.

impl Not for &Wrapping<i128>

type Output = <Wrapping<i128> as Not>::Output

The resulting type after applying the ! operator.

fn not(self) -> <Wrapping<i128> as Not>::Output

Performs the unary ! operation.

impl Not for &Wrapping<i16>

type Output = <Wrapping<i16> as Not>::Output

The resulting type after applying the ! operator.

fn not(self) -> <Wrapping<i16> as Not>::Output

Performs the unary ! operation.

impl Not for &Wrapping<i32>

type Output = <Wrapping<i32> as Not>::Output

The resulting type after applying the ! operator.

fn not(self) -> <Wrapping<i32> as Not>::Output

Performs the unary ! operation.

impl Not for &Wrapping<i64>

type Output = <Wrapping<i64> as Not>::Output

The resulting type after applying the ! operator.

fn not(self) -> <Wrapping<i64> as Not>::Output

Performs the unary ! operation.

impl Not for &Wrapping<i8>

type Output = <Wrapping<i8> as Not>::Output

The resulting type after applying the ! operator.

fn not(self) -> <Wrapping<i8> as Not>::Output

Performs the unary ! operation.

impl Not for &Wrapping<isize>

type Output = <Wrapping<isize> as Not>::Output

The resulting type after applying the ! operator.

fn not(self) -> <Wrapping<isize> as Not>::Output

Performs the unary ! operation.

impl Not for &Wrapping<u128>

type Output = <Wrapping<u128> as Not>::Output

The resulting type after applying the ! operator.

fn not(self) -> <Wrapping<u128> as Not>::Output

Performs the unary ! operation.

impl Not for &Wrapping<u16>

type Output = <Wrapping<u16> as Not>::Output

The resulting type after applying the ! operator.

fn not(self) -> <Wrapping<u16> as Not>::Output

Performs the unary ! operation.

impl Not for &Wrapping<u32>

type Output = <Wrapping<u32> as Not>::Output

The resulting type after applying the ! operator.

fn not(self) -> <Wrapping<u32> as Not>::Output

Performs the unary ! operation.

impl Not for &Wrapping<u64>

type Output = <Wrapping<u64> as Not>::Output

The resulting type after applying the ! operator.

fn not(self) -> <Wrapping<u64> as Not>::Output

Performs the unary ! operation.

impl Not for &Wrapping<u8>

type Output = <Wrapping<u8> as Not>::Output

The resulting type after applying the ! operator.

fn not(self) -> <Wrapping<u8> as Not>::Output

Performs the unary ! operation.

impl Not for &Wrapping<usize>

type Output = <Wrapping<usize> as Not>::Output

The resulting type after applying the ! operator.

fn not(self) -> <Wrapping<usize> as Not>::Output

Performs the unary ! operation.

impl Not for Wrapping<i128>

type Output = Wrapping<i128>

The resulting type after applying the ! operator.

fn not(self) -> Wrapping<i128>

Performs the unary ! operation.

impl Not for Wrapping<i16>

type Output = Wrapping<i16>

The resulting type after applying the ! operator.

fn not(self) -> Wrapping<i16>

Performs the unary ! operation.

impl Not for Wrapping<i32>

type Output = Wrapping<i32>

The resulting type after applying the ! operator.

fn not(self) -> Wrapping<i32>

Performs the unary ! operation.

impl Not for Wrapping<i64>

type Output = Wrapping<i64>

The resulting type after applying the ! operator.

fn not(self) -> Wrapping<i64>

Performs the unary ! operation.

impl Not for Wrapping<i8>

type Output = Wrapping<i8>

The resulting type after applying the ! operator.

fn not(self) -> Wrapping<i8>

Performs the unary ! operation.

impl Not for Wrapping<isize>

type Output = Wrapping<isize>

The resulting type after applying the ! operator.

fn not(self) -> Wrapping<isize>

Performs the unary ! operation.

impl Not for Wrapping<u128>

type Output = Wrapping<u128>

The resulting type after applying the ! operator.

fn not(self) -> Wrapping<u128>

Performs the unary ! operation.

impl Not for Wrapping<u16>

type Output = Wrapping<u16>

The resulting type after applying the ! operator.

fn not(self) -> Wrapping<u16>

Performs the unary ! operation.

impl Not for Wrapping<u32>

type Output = Wrapping<u32>

The resulting type after applying the ! operator.

fn not(self) -> Wrapping<u32>

Performs the unary ! operation.

impl Not for Wrapping<u64>

type Output = Wrapping<u64>

The resulting type after applying the ! operator.

fn not(self) -> Wrapping<u64>

Performs the unary ! operation.

impl Not for Wrapping<u8>

type Output = Wrapping<u8>

The resulting type after applying the ! operator.

fn not(self) -> Wrapping<u8>

Performs the unary ! operation.

impl Not for Wrapping<usize>

type Output = Wrapping<usize>

The resulting type after applying the ! operator.

fn not(self) -> Wrapping<usize>

Performs the unary ! operation.

impl<T> Octal for Wrapping<T>

where T: Octal,

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.

impl<T> Ord for Wrapping<T>

where T: Ord,

fn cmp(&self, other: &Wrapping<T>) -> Ordering

This method returns an Ordering between self and other.

fn max(self, other: Self) -> Self

where Self: Sized,

Compares and returns the maximum of two values.

fn min(self, other: Self) -> Self

where Self: Sized,

Compares and returns the minimum of two values.

fn clamp(self, min: Self, max: Self) -> Self

where Self: Sized + PartialOrd,

Restrict a value to a certain interval.

impl<T> PartialEq for Wrapping<T>

where T: PartialEq,

fn eq(&self, other: &Wrapping<T>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<T> PartialOrd for Wrapping<T>

where T: PartialOrd,

fn partial_cmp(&self, other: &Wrapping<T>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<'a> Product<&'a Wrapping<i128>> for Wrapping<i128>

fn product<I>(iter: I) -> Wrapping<i128>

where I: Iterator<Item = &'a Wrapping<i128>>,

Method which takes an iterator and generates Self from the elements by multiplying the items.

impl<'a> Product<&'a Wrapping<i16>> for Wrapping<i16>

fn product<I>(iter: I) -> Wrapping<i16>

where I: Iterator<Item = &'a Wrapping<i16>>,

Method which takes an iterator and generates Self from the elements by multiplying the items.

impl<'a> Product<&'a Wrapping<i32>> for Wrapping<i32>

fn product<I>(iter: I) -> Wrapping<i32>

where I: Iterator<Item = &'a Wrapping<i32>>,

Method which takes an iterator and generates Self from the elements by multiplying the items.

impl<'a> Product<&'a Wrapping<i64>> for Wrapping<i64>

fn product<I>(iter: I) -> Wrapping<i64>

where I: Iterator<Item = &'a Wrapping<i64>>,

Method which takes an iterator and generates Self from the elements by multiplying the items.

impl<'a> Product<&'a Wrapping<i8>> for Wrapping<i8>

fn product<I>(iter: I) -> Wrapping<i8>

where I: Iterator<Item = &'a Wrapping<i8>>,

Method which takes an iterator and generates Self from the elements by multiplying the items.

impl<'a> Product<&'a Wrapping<isize>> for Wrapping<isize>

fn product<I>(iter: I) -> Wrapping<isize>

where I: Iterator<Item = &'a Wrapping<isize>>,

Method which takes an iterator and generates Self from the elements by multiplying the items.

impl<'a> Product<&'a Wrapping<u128>> for Wrapping<u128>

fn product<I>(iter: I) -> Wrapping<u128>

where I: Iterator<Item = &'a Wrapping<u128>>,

Method which takes an iterator and generates Self from the elements by multiplying the items.

impl<'a> Product<&'a Wrapping<u16>> for Wrapping<u16>

fn product<I>(iter: I) -> Wrapping<u16>

where I: Iterator<Item = &'a Wrapping<u16>>,

Method which takes an iterator and generates Self from the elements by multiplying the items.

impl<'a> Product<&'a Wrapping<u32>> for Wrapping<u32>

fn product<I>(iter: I) -> Wrapping<u32>

where I: Iterator<Item = &'a Wrapping<u32>>,

Method which takes an iterator and generates Self from the elements by multiplying the items.

impl<'a> Product<&'a Wrapping<u64>> for Wrapping<u64>

fn product<I>(iter: I) -> Wrapping<u64>

where I: Iterator<Item = &'a Wrapping<u64>>,

Method which takes an iterator and generates Self from the elements by multiplying the items.

impl<'a> Product<&'a Wrapping<u8>> for Wrapping<u8>

fn product<I>(iter: I) -> Wrapping<u8>

where I: Iterator<Item = &'a Wrapping<u8>>,

Method which takes an iterator and generates Self from the elements by multiplying the items.

impl<'a> Product<&'a Wrapping<usize>> for Wrapping<usize>

fn product<I>(iter: I) -> Wrapping<usize>

where I: Iterator<Item = &'a Wrapping<usize>>,

Method which takes an iterator and generates Self from the elements by multiplying the items.

impl Product for Wrapping<i128>

fn product<I>(iter: I) -> Wrapping<i128>

where I: Iterator<Item = Wrapping<i128>>,

Method which takes an iterator and generates Self from the elements by multiplying the items.

impl Product for Wrapping<i16>

fn product<I>(iter: I) -> Wrapping<i16>

where I: Iterator<Item = Wrapping<i16>>,

Method which takes an iterator and generates Self from the elements by multiplying the items.

impl Product for Wrapping<i32>

fn product<I>(iter: I) -> Wrapping<i32>

where I: Iterator<Item = Wrapping<i32>>,

Method which takes an iterator and generates Self from the elements by multiplying the items.

impl Product for Wrapping<i64>

fn product<I>(iter: I) -> Wrapping<i64>

where I: Iterator<Item = Wrapping<i64>>,

Method which takes an iterator and generates Self from the elements by multiplying the items.

impl Product for Wrapping<i8>

fn product<I>(iter: I) -> Wrapping<i8>

where I: Iterator<Item = Wrapping<i8>>,

Method which takes an iterator and generates Self from the elements by multiplying the items.

impl Product for Wrapping<isize>

fn product<I>(iter: I) -> Wrapping<isize>

where I: Iterator<Item = Wrapping<isize>>,

Method which takes an iterator and generates Self from the elements by multiplying the items.

impl Product for Wrapping<u128>

fn product<I>(iter: I) -> Wrapping<u128>

where I: Iterator<Item = Wrapping<u128>>,

Method which takes an iterator and generates Self from the elements by multiplying the items.

impl Product for Wrapping<u16>

fn product<I>(iter: I) -> Wrapping<u16>

where I: Iterator<Item = Wrapping<u16>>,

Method which takes an iterator and generates Self from the elements by multiplying the items.

impl Product for Wrapping<u32>

fn product<I>(iter: I) -> Wrapping<u32>

where I: Iterator<Item = Wrapping<u32>>,

Method which takes an iterator and generates Self from the elements by multiplying the items.

impl Product for Wrapping<u64>

fn product<I>(iter: I) -> Wrapping<u64>

where I: Iterator<Item = Wrapping<u64>>,

Method which takes an iterator and generates Self from the elements by multiplying the items.

impl Product for Wrapping<u8>

fn product<I>(iter: I) -> Wrapping<u8>

where I: Iterator<Item = Wrapping<u8>>,

Method which takes an iterator and generates Self from the elements by multiplying the items.

impl Product for Wrapping<usize>

fn product<I>(iter: I) -> Wrapping<usize>

where I: Iterator<Item = Wrapping<usize>>,

Method which takes an iterator and generates Self from the elements by multiplying the items.

impl Rem<&Wrapping<i128>> for &Wrapping<i128>

type Output = <Wrapping<i128> as Rem>::Output

The resulting type after applying the % operator.

fn rem(self, other: &Wrapping<i128>) -> <Wrapping<i128> as Rem>::Output

Performs the % operation.

impl Rem<&Wrapping<i128>> for Wrapping<i128>

type Output = <Wrapping<i128> as Rem>::Output

The resulting type after applying the % operator.

fn rem(self, other: &Wrapping<i128>) -> <Wrapping<i128> as Rem>::Output

Performs the % operation.

impl Rem<&Wrapping<i16>> for &Wrapping<i16>

type Output = <Wrapping<i16> as Rem>::Output

The resulting type after applying the % operator.

fn rem(self, other: &Wrapping<i16>) -> <Wrapping<i16> as Rem>::Output

Performs the % operation.

impl Rem<&Wrapping<i16>> for Wrapping<i16>

type Output = <Wrapping<i16> as Rem>::Output

The resulting type after applying the % operator.

fn rem(self, other: &Wrapping<i16>) -> <Wrapping<i16> as Rem>::Output

Performs the % operation.

impl Rem<&Wrapping<i32>> for &Wrapping<i32>

type Output = <Wrapping<i32> as Rem>::Output

The resulting type after applying the % operator.

fn rem(self, other: &Wrapping<i32>) -> <Wrapping<i32> as Rem>::Output

Performs the % operation.

impl Rem<&Wrapping<i32>> for Wrapping<i32>

type Output = <Wrapping<i32> as Rem>::Output

The resulting type after applying the % operator.

fn rem(self, other: &Wrapping<i32>) -> <Wrapping<i32> as Rem>::Output

Performs the % operation.

impl Rem<&Wrapping<i64>> for &Wrapping<i64>

type Output = <Wrapping<i64> as Rem>::Output

The resulting type after applying the % operator.

fn rem(self, other: &Wrapping<i64>) -> <Wrapping<i64> as Rem>::Output

Performs the % operation.

impl Rem<&Wrapping<i64>> for Wrapping<i64>

type Output = <Wrapping<i64> as Rem>::Output

The resulting type after applying the % operator.

fn rem(self, other: &Wrapping<i64>) -> <Wrapping<i64> as Rem>::Output

Performs the % operation.

impl Rem<&Wrapping<i8>> for &Wrapping<i8>

type Output = <Wrapping<i8> as Rem>::Output

The resulting type after applying the % operator.

fn rem(self, other: &Wrapping<i8>) -> <Wrapping<i8> as Rem>::Output

Performs the % operation.

impl Rem<&Wrapping<i8>> for Wrapping<i8>

type Output = <Wrapping<i8> as Rem>::Output

The resulting type after applying the % operator.

fn rem(self, other: &Wrapping<i8>) -> <Wrapping<i8> as Rem>::Output

Performs the % operation.

impl Rem<&Wrapping<isize>> for &Wrapping<isize>

type Output = <Wrapping<isize> as Rem>::Output

The resulting type after applying the % operator.

fn rem(self, other: &Wrapping<isize>) -> <Wrapping<isize> as Rem>::Output

Performs the % operation.

impl Rem<&Wrapping<isize>> for Wrapping<isize>

type Output = <Wrapping<isize> as Rem>::Output

The resulting type after applying the % operator.

fn rem(self, other: &Wrapping<isize>) -> <Wrapping<isize> as Rem>::Output

Performs the % operation.

impl Rem<&Wrapping<u128>> for &Wrapping<u128>

type Output = <Wrapping<u128> as Rem>::Output

The resulting type after applying the % operator.

fn rem(self, other: &Wrapping<u128>) -> <Wrapping<u128> as Rem>::Output

Performs the % operation.

impl Rem<&Wrapping<u128>> for Wrapping<u128>

type Output = <Wrapping<u128> as Rem>::Output

The resulting type after applying the % operator.

fn rem(self, other: &Wrapping<u128>) -> <Wrapping<u128> as Rem>::Output

Performs the % operation.

impl Rem<&Wrapping<u16>> for &Wrapping<u16>

type Output = <Wrapping<u16> as Rem>::Output

The resulting type after applying the % operator.

fn rem(self, other: &Wrapping<u16>) -> <Wrapping<u16> as Rem>::Output

Performs the % operation.

impl Rem<&Wrapping<u16>> for Wrapping<u16>

type Output = <Wrapping<u16> as Rem>::Output

The resulting type after applying the % operator.

fn rem(self, other: &Wrapping<u16>) -> <Wrapping<u16> as Rem>::Output

Performs the % operation.

impl Rem<&Wrapping<u32>> for &Wrapping<u32>

type Output = <Wrapping<u32> as Rem>::Output

The resulting type after applying the % operator.

fn rem(self, other: &Wrapping<u32>) -> <Wrapping<u32> as Rem>::Output

Performs the % operation.

impl Rem<&Wrapping<u32>> for Wrapping<u32>

type Output = <Wrapping<u32> as Rem>::Output

The resulting type after applying the % operator.

fn rem(self, other: &Wrapping<u32>) -> <Wrapping<u32> as Rem>::Output

Performs the % operation.

impl Rem<&Wrapping<u64>> for &Wrapping<u64>

type Output = <Wrapping<u64> as Rem>::Output

The resulting type after applying the % operator.

fn rem(self, other: &Wrapping<u64>) -> <Wrapping<u64> as Rem>::Output

Performs the % operation.

impl Rem<&Wrapping<u64>> for Wrapping<u64>

type Output = <Wrapping<u64> as Rem>::Output

The resulting type after applying the % operator.

fn rem(self, other: &Wrapping<u64>) -> <Wrapping<u64> as Rem>::Output

Performs the % operation.

impl Rem<&Wrapping<u8>> for &Wrapping<u8>

type Output = <Wrapping<u8> as Rem>::Output

The resulting type after applying the % operator.

fn rem(self, other: &Wrapping<u8>) -> <Wrapping<u8> as Rem>::Output

Performs the % operation.

impl Rem<&Wrapping<u8>> for Wrapping<u8>

type Output = <Wrapping<u8> as Rem>::Output

The resulting type after applying the % operator.

fn rem(self, other: &Wrapping<u8>) -> <Wrapping<u8> as Rem>::Output

Performs the % operation.

impl Rem<&Wrapping<usize>> for &Wrapping<usize>

type Output = <Wrapping<usize> as Rem>::Output

The resulting type after applying the % operator.

fn rem(self, other: &Wrapping<usize>) -> <Wrapping<usize> as Rem>::Output

Performs the % operation.

impl Rem<&Wrapping<usize>> for Wrapping<usize>

type Output = <Wrapping<usize> as Rem>::Output

The resulting type after applying the % operator.

fn rem(self, other: &Wrapping<usize>) -> <Wrapping<usize> as Rem>::Output

Performs the % operation.

impl<'a> Rem<Wrapping<i128>> for &'a Wrapping<i128>

type Output = <Wrapping<i128> as Rem>::Output

The resulting type after applying the % operator.

fn rem(self, other: Wrapping<i128>) -> <Wrapping<i128> as Rem>::Output

Performs the % operation.

impl<'a> Rem<Wrapping<i16>> for &'a Wrapping<i16>

type Output = <Wrapping<i16> as Rem>::Output

The resulting type after applying the % operator.

fn rem(self, other: Wrapping<i16>) -> <Wrapping<i16> as Rem>::Output

Performs the % operation.

impl<'a> Rem<Wrapping<i32>> for &'a Wrapping<i32>

type Output = <Wrapping<i32> as Rem>::Output

The resulting type after applying the % operator.

fn rem(self, other: Wrapping<i32>) -> <Wrapping<i32> as Rem>::Output

Performs the % operation.

impl<'a> Rem<Wrapping<i64>> for &'a Wrapping<i64>

type Output = <Wrapping<i64> as Rem>::Output

The resulting type after applying the % operator.

fn rem(self, other: Wrapping<i64>) -> <Wrapping<i64> as Rem>::Output

Performs the % operation.

impl<'a> Rem<Wrapping<i8>> for &'a Wrapping<i8>

type Output = <Wrapping<i8> as Rem>::Output

The resulting type after applying the % operator.

fn rem(self, other: Wrapping<i8>) -> <Wrapping<i8> as Rem>::Output

Performs the % operation.

impl<'a> Rem<Wrapping<isize>> for &'a Wrapping<isize>

type Output = <Wrapping<isize> as Rem>::Output

The resulting type after applying the % operator.

fn rem(self, other: Wrapping<isize>) -> <Wrapping<isize> as Rem>::Output

Performs the % operation.

impl<'a> Rem<Wrapping<u128>> for &'a Wrapping<u128>

type Output = <Wrapping<u128> as Rem>::Output

The resulting type after applying the % operator.

fn rem(self, other: Wrapping<u128>) -> <Wrapping<u128> as Rem>::Output

Performs the % operation.

impl<'a> Rem<Wrapping<u16>> for &'a Wrapping<u16>

type Output = <Wrapping<u16> as Rem>::Output

The resulting type after applying the % operator.

fn rem(self, other: Wrapping<u16>) -> <Wrapping<u16> as Rem>::Output

Performs the % operation.

impl<'a> Rem<Wrapping<u32>> for &'a Wrapping<u32>

type Output = <Wrapping<u32> as Rem>::Output

The resulting type after applying the % operator.

fn rem(self, other: Wrapping<u32>) -> <Wrapping<u32> as Rem>::Output

Performs the % operation.

impl<'a> Rem<Wrapping<u64>> for &'a Wrapping<u64>

type Output = <Wrapping<u64> as Rem>::Output

The resulting type after applying the % operator.

fn rem(self, other: Wrapping<u64>) -> <Wrapping<u64> as Rem>::Output

Performs the % operation.

impl<'a> Rem<Wrapping<u8>> for &'a Wrapping<u8>

type Output = <Wrapping<u8> as Rem>::Output

The resulting type after applying the % operator.

fn rem(self, other: Wrapping<u8>) -> <Wrapping<u8> as Rem>::Output

Performs the % operation.

impl<'a> Rem<Wrapping<usize>> for &'a Wrapping<usize>

type Output = <Wrapping<usize> as Rem>::Output

The resulting type after applying the % operator.

fn rem(self, other: Wrapping<usize>) -> <Wrapping<usize> as Rem>::Output

Performs the % operation.

impl Rem for Wrapping<i128>

type Output = Wrapping<i128>

The resulting type after applying the % operator.

fn rem(self, other: Wrapping<i128>) -> Wrapping<i128>

Performs the % operation.

impl Rem for Wrapping<i16>

type Output = Wrapping<i16>

The resulting type after applying the % operator.

fn rem(self, other: Wrapping<i16>) -> Wrapping<i16>

Performs the % operation.

impl Rem for Wrapping<i32>

type Output = Wrapping<i32>

The resulting type after applying the % operator.

fn rem(self, other: Wrapping<i32>) -> Wrapping<i32>

Performs the % operation.

impl Rem for Wrapping<i64>

type Output = Wrapping<i64>

The resulting type after applying the % operator.

fn rem(self, other: Wrapping<i64>) -> Wrapping<i64>

Performs the % operation.

impl Rem for Wrapping<i8>

type Output = Wrapping<i8>

The resulting type after applying the % operator.

fn rem(self, other: Wrapping<i8>) -> Wrapping<i8>

Performs the % operation.

impl Rem for Wrapping<isize>

type Output = Wrapping<isize>

The resulting type after applying the % operator.

fn rem(self, other: Wrapping<isize>) -> Wrapping<isize>

Performs the % operation.

impl Rem for Wrapping<u128>

type Output = Wrapping<u128>

The resulting type after applying the % operator.

fn rem(self, other: Wrapping<u128>) -> Wrapping<u128>

Performs the % operation.

impl Rem for Wrapping<u16>

type Output = Wrapping<u16>

The resulting type after applying the % operator.

fn rem(self, other: Wrapping<u16>) -> Wrapping<u16>

Performs the % operation.

impl Rem for Wrapping<u32>

type Output = Wrapping<u32>

The resulting type after applying the % operator.

fn rem(self, other: Wrapping<u32>) -> Wrapping<u32>

Performs the % operation.

impl Rem for Wrapping<u64>

type Output = Wrapping<u64>

The resulting type after applying the % operator.

fn rem(self, other: Wrapping<u64>) -> Wrapping<u64>

Performs the % operation.

impl Rem for Wrapping<u8>

type Output = Wrapping<u8>

The resulting type after applying the % operator.

fn rem(self, other: Wrapping<u8>) -> Wrapping<u8>

Performs the % operation.

impl Rem for Wrapping<usize>

type Output = Wrapping<usize>

The resulting type after applying the % operator.

fn rem(self, other: Wrapping<usize>) -> Wrapping<usize>

Performs the % operation.

impl RemAssign<&Wrapping<i128>> for Wrapping<i128>

fn rem_assign(&mut self, other: &Wrapping<i128>)

Performs the %= operation.

impl RemAssign<&Wrapping<i16>> for Wrapping<i16>

fn rem_assign(&mut self, other: &Wrapping<i16>)

Performs the %= operation.

impl RemAssign<&Wrapping<i32>> for Wrapping<i32>

fn rem_assign(&mut self, other: &Wrapping<i32>)

Performs the %= operation.

impl RemAssign<&Wrapping<i64>> for Wrapping<i64>

fn rem_assign(&mut self, other: &Wrapping<i64>)

Performs the %= operation.

impl RemAssign<&Wrapping<i8>> for Wrapping<i8>

fn rem_assign(&mut self, other: &Wrapping<i8>)

Performs the %= operation.

impl RemAssign<&Wrapping<isize>> for Wrapping<isize>

fn rem_assign(&mut self, other: &Wrapping<isize>)

Performs the %= operation.

impl RemAssign<&Wrapping<u128>> for Wrapping<u128>

fn rem_assign(&mut self, other: &Wrapping<u128>)

Performs the %= operation.

impl RemAssign<&Wrapping<u16>> for Wrapping<u16>

fn rem_assign(&mut self, other: &Wrapping<u16>)

Performs the %= operation.

impl RemAssign<&Wrapping<u32>> for Wrapping<u32>

fn rem_assign(&mut self, other: &Wrapping<u32>)

Performs the %= operation.

impl RemAssign<&Wrapping<u64>> for Wrapping<u64>

fn rem_assign(&mut self, other: &Wrapping<u64>)

Performs the %= operation.

impl RemAssign<&Wrapping<u8>> for Wrapping<u8>

fn rem_assign(&mut self, other: &Wrapping<u8>)

Performs the %= operation.

impl RemAssign<&Wrapping<usize>> for Wrapping<usize>

fn rem_assign(&mut self, other: &Wrapping<usize>)

Performs the %= operation.

impl RemAssign<&i128> for Wrapping<i128>

fn rem_assign(&mut self, other: &i128)

Performs the %= operation.

impl RemAssign<&i16> for Wrapping<i16>

fn rem_assign(&mut self, other: &i16)

Performs the %= operation.

impl RemAssign<&i32> for Wrapping<i32>

fn rem_assign(&mut self, other: &i32)

Performs the %= operation.

impl RemAssign<&i64> for Wrapping<i64>

fn rem_assign(&mut self, other: &i64)

Performs the %= operation.

impl RemAssign<&i8> for Wrapping<i8>

fn rem_assign(&mut self, other: &i8)

Performs the %= operation.

impl RemAssign<&isize> for Wrapping<isize>

fn rem_assign(&mut self, other: &isize)

Performs the %= operation.

impl RemAssign<&u128> for Wrapping<u128>

fn rem_assign(&mut self, other: &u128)

Performs the %= operation.

impl RemAssign<&u16> for Wrapping<u16>

fn rem_assign(&mut self, other: &u16)

Performs the %= operation.

impl RemAssign<&u32> for Wrapping<u32>

fn rem_assign(&mut self, other: &u32)

Performs the %= operation.

impl RemAssign<&u64> for Wrapping<u64>

fn rem_assign(&mut self, other: &u64)

Performs the %= operation.

impl RemAssign<&u8> for Wrapping<u8>

fn rem_assign(&mut self, other: &u8)

Performs the %= operation.

impl RemAssign<&usize> for Wrapping<usize>

fn rem_assign(&mut self, other: &usize)

Performs the %= operation.

impl RemAssign<i128> for Wrapping<i128>

fn rem_assign(&mut self, other: i128)

Performs the %= operation.

impl RemAssign<i16> for Wrapping<i16>

fn rem_assign(&mut self, other: i16)

Performs the %= operation.

impl RemAssign<i32> for Wrapping<i32>

fn rem_assign(&mut self, other: i32)

Performs the %= operation.

impl RemAssign<i64> for Wrapping<i64>

fn rem_assign(&mut self, other: i64)

Performs the %= operation.

impl RemAssign<i8> for Wrapping<i8>

fn rem_assign(&mut self, other: i8)

Performs the %= operation.

impl RemAssign<isize> for Wrapping<isize>

fn rem_assign(&mut self, other: isize)

Performs the %= operation.

impl RemAssign<u128> for Wrapping<u128>

fn rem_assign(&mut self, other: u128)

Performs the %= operation.

impl RemAssign<u16> for Wrapping<u16>

fn rem_assign(&mut self, other: u16)

Performs the %= operation.

impl RemAssign<u32> for Wrapping<u32>

fn rem_assign(&mut self, other: u32)

Performs the %= operation.

impl RemAssign<u64> for Wrapping<u64>

fn rem_assign(&mut self, other: u64)

Performs the %= operation.

impl RemAssign<u8> for Wrapping<u8>

fn rem_assign(&mut self, other: u8)

Performs the %= operation.

impl RemAssign<usize> for Wrapping<usize>

fn rem_assign(&mut self, other: usize)

Performs the %= operation.

impl RemAssign for Wrapping<i128>

fn rem_assign(&mut self, other: Wrapping<i128>)

Performs the %= operation.

impl RemAssign for Wrapping<i16>

fn rem_assign(&mut self, other: Wrapping<i16>)

Performs the %= operation.

impl RemAssign for Wrapping<i32>

fn rem_assign(&mut self, other: Wrapping<i32>)

Performs the %= operation.

impl RemAssign for Wrapping<i64>

fn rem_assign(&mut self, other: Wrapping<i64>)

Performs the %= operation.

impl RemAssign for Wrapping<i8>

fn rem_assign(&mut self, other: Wrapping<i8>)

Performs the %= operation.

impl RemAssign for Wrapping<isize>

fn rem_assign(&mut self, other: Wrapping<isize>)

Performs the %= operation.

impl RemAssign for Wrapping<u128>

fn rem_assign(&mut self, other: Wrapping<u128>)

Performs the %= operation.

impl RemAssign for Wrapping<u16>

fn rem_assign(&mut self, other: Wrapping<u16>)

Performs the %= operation.

impl RemAssign for Wrapping<u32>

fn rem_assign(&mut self, other: Wrapping<u32>)

Performs the %= operation.

impl RemAssign for Wrapping<u64>

fn rem_assign(&mut self, other: Wrapping<u64>)

Performs the %= operation.

impl RemAssign for Wrapping<u8>

fn rem_assign(&mut self, other: Wrapping<u8>)

Performs the %= operation.

impl RemAssign for Wrapping<usize>

fn rem_assign(&mut self, other: Wrapping<usize>)

Performs the %= operation.

impl Shl<&usize> for &Wrapping<i128>

type Output = <Wrapping<i128> as Shl<usize>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &usize) -> <Wrapping<i128> as Shl<usize>>::Output

Performs the << operation.

impl Shl<&usize> for &Wrapping<i16>

type Output = <Wrapping<i16> as Shl<usize>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &usize) -> <Wrapping<i16> as Shl<usize>>::Output

Performs the << operation.

impl Shl<&usize> for &Wrapping<i32>

type Output = <Wrapping<i32> as Shl<usize>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &usize) -> <Wrapping<i32> as Shl<usize>>::Output

Performs the << operation.

impl Shl<&usize> for &Wrapping<i64>

type Output = <Wrapping<i64> as Shl<usize>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &usize) -> <Wrapping<i64> as Shl<usize>>::Output

Performs the << operation.

impl Shl<&usize> for &Wrapping<i8>

type Output = <Wrapping<i8> as Shl<usize>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &usize) -> <Wrapping<i8> as Shl<usize>>::Output

Performs the << operation.

impl Shl<&usize> for &Wrapping<isize>

type Output = <Wrapping<isize> as Shl<usize>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &usize) -> <Wrapping<isize> as Shl<usize>>::Output

Performs the << operation.

impl Shl<&usize> for &Wrapping<u128>

type Output = <Wrapping<u128> as Shl<usize>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &usize) -> <Wrapping<u128> as Shl<usize>>::Output

Performs the << operation.

impl Shl<&usize> for &Wrapping<u16>

type Output = <Wrapping<u16> as Shl<usize>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &usize) -> <Wrapping<u16> as Shl<usize>>::Output

Performs the << operation.

impl Shl<&usize> for &Wrapping<u32>

type Output = <Wrapping<u32> as Shl<usize>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &usize) -> <Wrapping<u32> as Shl<usize>>::Output

Performs the << operation.

impl Shl<&usize> for &Wrapping<u64>

type Output = <Wrapping<u64> as Shl<usize>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &usize) -> <Wrapping<u64> as Shl<usize>>::Output

Performs the << operation.

impl Shl<&usize> for &Wrapping<u8>

type Output = <Wrapping<u8> as Shl<usize>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &usize) -> <Wrapping<u8> as Shl<usize>>::Output

Performs the << operation.

impl Shl<&usize> for &Wrapping<usize>

type Output = <Wrapping<usize> as Shl<usize>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &usize) -> <Wrapping<usize> as Shl<usize>>::Output

Performs the << operation.

impl Shl<&usize> for Wrapping<i128>

type Output = <Wrapping<i128> as Shl<usize>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &usize) -> <Wrapping<i128> as Shl<usize>>::Output

Performs the << operation.

impl Shl<&usize> for Wrapping<i16>

type Output = <Wrapping<i16> as Shl<usize>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &usize) -> <Wrapping<i16> as Shl<usize>>::Output

Performs the << operation.

impl Shl<&usize> for Wrapping<i32>

type Output = <Wrapping<i32> as Shl<usize>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &usize) -> <Wrapping<i32> as Shl<usize>>::Output

Performs the << operation.

impl Shl<&usize> for Wrapping<i64>

type Output = <Wrapping<i64> as Shl<usize>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &usize) -> <Wrapping<i64> as Shl<usize>>::Output

Performs the << operation.

impl Shl<&usize> for Wrapping<i8>

type Output = <Wrapping<i8> as Shl<usize>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &usize) -> <Wrapping<i8> as Shl<usize>>::Output

Performs the << operation.

impl Shl<&usize> for Wrapping<isize>

type Output = <Wrapping<isize> as Shl<usize>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &usize) -> <Wrapping<isize> as Shl<usize>>::Output

Performs the << operation.

impl Shl<&usize> for Wrapping<u128>

type Output = <Wrapping<u128> as Shl<usize>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &usize) -> <Wrapping<u128> as Shl<usize>>::Output

Performs the << operation.

impl Shl<&usize> for Wrapping<u16>

type Output = <Wrapping<u16> as Shl<usize>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &usize) -> <Wrapping<u16> as Shl<usize>>::Output

Performs the << operation.

impl Shl<&usize> for Wrapping<u32>

type Output = <Wrapping<u32> as Shl<usize>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &usize) -> <Wrapping<u32> as Shl<usize>>::Output

Performs the << operation.

impl Shl<&usize> for Wrapping<u64>

type Output = <Wrapping<u64> as Shl<usize>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &usize) -> <Wrapping<u64> as Shl<usize>>::Output

Performs the << operation.

impl Shl<&usize> for Wrapping<u8>

type Output = <Wrapping<u8> as Shl<usize>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &usize) -> <Wrapping<u8> as Shl<usize>>::Output

Performs the << operation.

impl Shl<&usize> for Wrapping<usize>

type Output = <Wrapping<usize> as Shl<usize>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &usize) -> <Wrapping<usize> as Shl<usize>>::Output

Performs the << operation.

impl<'a> Shl<usize> for &'a Wrapping<i128>

type Output = <Wrapping<i128> as Shl<usize>>::Output

The resulting type after applying the << operator.

fn shl(self, other: usize) -> <Wrapping<i128> as Shl<usize>>::Output

Performs the << operation.

impl<'a> Shl<usize> for &'a Wrapping<i16>

type Output = <Wrapping<i16> as Shl<usize>>::Output

The resulting type after applying the << operator.

fn shl(self, other: usize) -> <Wrapping<i16> as Shl<usize>>::Output

Performs the << operation.

impl<'a> Shl<usize> for &'a Wrapping<i32>

type Output = <Wrapping<i32> as Shl<usize>>::Output

The resulting type after applying the << operator.

fn shl(self, other: usize) -> <Wrapping<i32> as Shl<usize>>::Output

Performs the << operation.

impl<'a> Shl<usize> for &'a Wrapping<i64>

type Output = <Wrapping<i64> as Shl<usize>>::Output

The resulting type after applying the << operator.

fn shl(self, other: usize) -> <Wrapping<i64> as Shl<usize>>::Output

Performs the << operation.

impl<'a> Shl<usize> for &'a Wrapping<i8>

type Output = <Wrapping<i8> as Shl<usize>>::Output

The resulting type after applying the << operator.

fn shl(self, other: usize) -> <Wrapping<i8> as Shl<usize>>::Output

Performs the << operation.

impl<'a> Shl<usize> for &'a Wrapping<isize>

type Output = <Wrapping<isize> as Shl<usize>>::Output

The resulting type after applying the << operator.

fn shl(self, other: usize) -> <Wrapping<isize> as Shl<usize>>::Output

Performs the << operation.

impl<'a> Shl<usize> for &'a Wrapping<u128>

type Output = <Wrapping<u128> as Shl<usize>>::Output

The resulting type after applying the << operator.

fn shl(self, other: usize) -> <Wrapping<u128> as Shl<usize>>::Output

Performs the << operation.

impl<'a> Shl<usize> for &'a Wrapping<u16>

type Output = <Wrapping<u16> as Shl<usize>>::Output

The resulting type after applying the << operator.

fn shl(self, other: usize) -> <Wrapping<u16> as Shl<usize>>::Output

Performs the << operation.

impl<'a> Shl<usize> for &'a Wrapping<u32>

type Output = <Wrapping<u32> as Shl<usize>>::Output

The resulting type after applying the << operator.

fn shl(self, other: usize) -> <Wrapping<u32> as Shl<usize>>::Output

Performs the << operation.

impl<'a> Shl<usize> for &'a Wrapping<u64>

type Output = <Wrapping<u64> as Shl<usize>>::Output

The resulting type after applying the << operator.

fn shl(self, other: usize) -> <Wrapping<u64> as Shl<usize>>::Output

Performs the << operation.

impl<'a> Shl<usize> for &'a Wrapping<u8>

type Output = <Wrapping<u8> as Shl<usize>>::Output

The resulting type after applying the << operator.

fn shl(self, other: usize) -> <Wrapping<u8> as Shl<usize>>::Output

Performs the << operation.

impl<'a> Shl<usize> for &'a Wrapping<usize>

type Output = <Wrapping<usize> as Shl<usize>>::Output

The resulting type after applying the << operator.

fn shl(self, other: usize) -> <Wrapping<usize> as Shl<usize>>::Output

Performs the << operation.

impl Shl<usize> for Wrapping<i128>

type Output = Wrapping<i128>

The resulting type after applying the << operator.

fn shl(self, other: usize) -> Wrapping<i128>

Performs the << operation.

impl Shl<usize> for Wrapping<i16>

type Output = Wrapping<i16>

The resulting type after applying the << operator.

fn shl(self, other: usize) -> Wrapping<i16>

Performs the << operation.

impl Shl<usize> for Wrapping<i32>

type Output = Wrapping<i32>

The resulting type after applying the << operator.

fn shl(self, other: usize) -> Wrapping<i32>

Performs the << operation.

impl Shl<usize> for Wrapping<i64>

type Output = Wrapping<i64>

The resulting type after applying the << operator.

fn shl(self, other: usize) -> Wrapping<i64>

Performs the << operation.

impl Shl<usize> for Wrapping<i8>

type Output = Wrapping<i8>

The resulting type after applying the << operator.

fn shl(self, other: usize) -> Wrapping<i8>

Performs the << operation.

impl Shl<usize> for Wrapping<isize>

type Output = Wrapping<isize>

The resulting type after applying the << operator.

fn shl(self, other: usize) -> Wrapping<isize>

Performs the << operation.

impl Shl<usize> for Wrapping<u128>

type Output = Wrapping<u128>

The resulting type after applying the << operator.

fn shl(self, other: usize) -> Wrapping<u128>

Performs the << operation.

impl Shl<usize> for Wrapping<u16>

type Output = Wrapping<u16>

The resulting type after applying the << operator.

fn shl(self, other: usize) -> Wrapping<u16>

Performs the << operation.

impl Shl<usize> for Wrapping<u32>

type Output = Wrapping<u32>

The resulting type after applying the << operator.

fn shl(self, other: usize) -> Wrapping<u32>

Performs the << operation.

impl Shl<usize> for Wrapping<u64>

type Output = Wrapping<u64>

The resulting type after applying the << operator.

fn shl(self, other: usize) -> Wrapping<u64>

Performs the << operation.

impl Shl<usize> for Wrapping<u8>

type Output = Wrapping<u8>

The resulting type after applying the << operator.

fn shl(self, other: usize) -> Wrapping<u8>

Performs the << operation.

impl Shl<usize> for Wrapping<usize>

type Output = Wrapping<usize>

The resulting type after applying the << operator.

fn shl(self, other: usize) -> Wrapping<usize>

Performs the << operation.

impl ShlAssign<&usize> for Wrapping<i128>

fn shl_assign(&mut self, other: &usize)

Performs the <<= operation.

impl ShlAssign<&usize> for Wrapping<i16>

fn shl_assign(&mut self, other: &usize)

Performs the <<= operation.

impl ShlAssign<&usize> for Wrapping<i32>

fn shl_assign(&mut self, other: &usize)

Performs the <<= operation.

impl ShlAssign<&usize> for Wrapping<i64>

fn shl_assign(&mut self, other: &usize)

Performs the <<= operation.

impl ShlAssign<&usize> for Wrapping<i8>

fn shl_assign(&mut self, other: &usize)

Performs the <<= operation.

impl ShlAssign<&usize> for Wrapping<isize>

fn shl_assign(&mut self, other: &usize)

Performs the <<= operation.

impl ShlAssign<&usize> for Wrapping<u128>

fn shl_assign(&mut self, other: &usize)

Performs the <<= operation.

impl ShlAssign<&usize> for Wrapping<u16>

fn shl_assign(&mut self, other: &usize)

Performs the <<= operation.

impl ShlAssign<&usize> for Wrapping<u32>

fn shl_assign(&mut self, other: &usize)

Performs the <<= operation.

impl ShlAssign<&usize> for Wrapping<u64>

fn shl_assign(&mut self, other: &usize)

Performs the <<= operation.

impl ShlAssign<&usize> for Wrapping<u8>

fn shl_assign(&mut self, other: &usize)

Performs the <<= operation.

impl ShlAssign<&usize> for Wrapping<usize>

fn shl_assign(&mut self, other: &usize)

Performs the <<= operation.

impl ShlAssign<usize> for Wrapping<i128>

fn shl_assign(&mut self, other: usize)

Performs the <<= operation.

impl ShlAssign<usize> for Wrapping<i16>

fn shl_assign(&mut self, other: usize)

Performs the <<= operation.

impl ShlAssign<usize> for Wrapping<i32>

fn shl_assign(&mut self, other: usize)

Performs the <<= operation.

impl ShlAssign<usize> for Wrapping<i64>

fn shl_assign(&mut self, other: usize)

Performs the <<= operation.

impl ShlAssign<usize> for Wrapping<i8>

fn shl_assign(&mut self, other: usize)

Performs the <<= operation.

impl ShlAssign<usize> for Wrapping<isize>

fn shl_assign(&mut self, other: usize)

Performs the <<= operation.

impl ShlAssign<usize> for Wrapping<u128>

fn shl_assign(&mut self, other: usize)

Performs the <<= operation.

impl ShlAssign<usize> for Wrapping<u16>

fn shl_assign(&mut self, other: usize)

Performs the <<= operation.

impl ShlAssign<usize> for Wrapping<u32>

fn shl_assign(&mut self, other: usize)

Performs the <<= operation.

impl ShlAssign<usize> for Wrapping<u64>

fn shl_assign(&mut self, other: usize)

Performs the <<= operation.

impl ShlAssign<usize> for Wrapping<u8>

fn shl_assign(&mut self, other: usize)

Performs the <<= operation.

impl ShlAssign<usize> for Wrapping<usize>

fn shl_assign(&mut self, other: usize)

Performs the <<= operation.

impl Shr<&usize> for &Wrapping<i128>

type Output = <Wrapping<i128> as Shr<usize>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &usize) -> <Wrapping<i128> as Shr<usize>>::Output

Performs the >> operation.

impl Shr<&usize> for &Wrapping<i16>

type Output = <Wrapping<i16> as Shr<usize>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &usize) -> <Wrapping<i16> as Shr<usize>>::Output

Performs the >> operation.

impl Shr<&usize> for &Wrapping<i32>

type Output = <Wrapping<i32> as Shr<usize>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &usize) -> <Wrapping<i32> as Shr<usize>>::Output

Performs the >> operation.

impl Shr<&usize> for &Wrapping<i64>

type Output = <Wrapping<i64> as Shr<usize>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &usize) -> <Wrapping<i64> as Shr<usize>>::Output

Performs the >> operation.

impl Shr<&usize> for &Wrapping<i8>

type Output = <Wrapping<i8> as Shr<usize>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &usize) -> <Wrapping<i8> as Shr<usize>>::Output

Performs the >> operation.

impl Shr<&usize> for &Wrapping<isize>

type Output = <Wrapping<isize> as Shr<usize>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &usize) -> <Wrapping<isize> as Shr<usize>>::Output

Performs the >> operation.

impl Shr<&usize> for &Wrapping<u128>

type Output = <Wrapping<u128> as Shr<usize>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &usize) -> <Wrapping<u128> as Shr<usize>>::Output

Performs the >> operation.

impl Shr<&usize> for &Wrapping<u16>

type Output = <Wrapping<u16> as Shr<usize>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &usize) -> <Wrapping<u16> as Shr<usize>>::Output

Performs the >> operation.

impl Shr<&usize> for &Wrapping<u32>

type Output = <Wrapping<u32> as Shr<usize>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &usize) -> <Wrapping<u32> as Shr<usize>>::Output

Performs the >> operation.

impl Shr<&usize> for &Wrapping<u64>

type Output = <Wrapping<u64> as Shr<usize>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &usize) -> <Wrapping<u64> as Shr<usize>>::Output

Performs the >> operation.

impl Shr<&usize> for &Wrapping<u8>

type Output = <Wrapping<u8> as Shr<usize>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &usize) -> <Wrapping<u8> as Shr<usize>>::Output

Performs the >> operation.

impl Shr<&usize> for &Wrapping<usize>

type Output = <Wrapping<usize> as Shr<usize>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &usize) -> <Wrapping<usize> as Shr<usize>>::Output

Performs the >> operation.

impl Shr<&usize> for Wrapping<i128>

type Output = <Wrapping<i128> as Shr<usize>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &usize) -> <Wrapping<i128> as Shr<usize>>::Output

Performs the >> operation.

impl Shr<&usize> for Wrapping<i16>

type Output = <Wrapping<i16> as Shr<usize>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &usize) -> <Wrapping<i16> as Shr<usize>>::Output

Performs the >> operation.

impl Shr<&usize> for Wrapping<i32>

type Output = <Wrapping<i32> as Shr<usize>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &usize) -> <Wrapping<i32> as Shr<usize>>::Output

Performs the >> operation.

impl Shr<&usize> for Wrapping<i64>

type Output = <Wrapping<i64> as Shr<usize>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &usize) -> <Wrapping<i64> as Shr<usize>>::Output

Performs the >> operation.

impl Shr<&usize> for Wrapping<i8>

type Output = <Wrapping<i8> as Shr<usize>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &usize) -> <Wrapping<i8> as Shr<usize>>::Output

Performs the >> operation.

impl Shr<&usize> for Wrapping<isize>

type Output = <Wrapping<isize> as Shr<usize>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &usize) -> <Wrapping<isize> as Shr<usize>>::Output

Performs the >> operation.

impl Shr<&usize> for Wrapping<u128>

type Output = <Wrapping<u128> as Shr<usize>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &usize) -> <Wrapping<u128> as Shr<usize>>::Output

Performs the >> operation.

impl Shr<&usize> for Wrapping<u16>

type Output = <Wrapping<u16> as Shr<usize>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &usize) -> <Wrapping<u16> as Shr<usize>>::Output

Performs the >> operation.

impl Shr<&usize> for Wrapping<u32>

type Output = <Wrapping<u32> as Shr<usize>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &usize) -> <Wrapping<u32> as Shr<usize>>::Output

Performs the >> operation.

impl Shr<&usize> for Wrapping<u64>

type Output = <Wrapping<u64> as Shr<usize>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &usize) -> <Wrapping<u64> as Shr<usize>>::Output

Performs the >> operation.

impl Shr<&usize> for Wrapping<u8>

type Output = <Wrapping<u8> as Shr<usize>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &usize) -> <Wrapping<u8> as Shr<usize>>::Output

Performs the >> operation.

impl Shr<&usize> for Wrapping<usize>

type Output = <Wrapping<usize> as Shr<usize>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &usize) -> <Wrapping<usize> as Shr<usize>>::Output

Performs the >> operation.

impl<'a> Shr<usize> for &'a Wrapping<i128>

type Output = <Wrapping<i128> as Shr<usize>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: usize) -> <Wrapping<i128> as Shr<usize>>::Output

Performs the >> operation.

impl<'a> Shr<usize> for &'a Wrapping<i16>

type Output = <Wrapping<i16> as Shr<usize>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: usize) -> <Wrapping<i16> as Shr<usize>>::Output

Performs the >> operation.

impl<'a> Shr<usize> for &'a Wrapping<i32>

type Output = <Wrapping<i32> as Shr<usize>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: usize) -> <Wrapping<i32> as Shr<usize>>::Output

Performs the >> operation.

impl<'a> Shr<usize> for &'a Wrapping<i64>

type Output = <Wrapping<i64> as Shr<usize>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: usize) -> <Wrapping<i64> as Shr<usize>>::Output

Performs the >> operation.

impl<'a> Shr<usize> for &'a Wrapping<i8>

type Output = <Wrapping<i8> as Shr<usize>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: usize) -> <Wrapping<i8> as Shr<usize>>::Output

Performs the >> operation.

impl<'a> Shr<usize> for &'a Wrapping<isize>

type Output = <Wrapping<isize> as Shr<usize>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: usize) -> <Wrapping<isize> as Shr<usize>>::Output

Performs the >> operation.

impl<'a> Shr<usize> for &'a Wrapping<u128>

type Output = <Wrapping<u128> as Shr<usize>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: usize) -> <Wrapping<u128> as Shr<usize>>::Output

Performs the >> operation.

impl<'a> Shr<usize> for &'a Wrapping<u16>

type Output = <Wrapping<u16> as Shr<usize>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: usize) -> <Wrapping<u16> as Shr<usize>>::Output

Performs the >> operation.

impl<'a> Shr<usize> for &'a Wrapping<u32>

type Output = <Wrapping<u32> as Shr<usize>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: usize) -> <Wrapping<u32> as Shr<usize>>::Output

Performs the >> operation.

impl<'a> Shr<usize> for &'a Wrapping<u64>

type Output = <Wrapping<u64> as Shr<usize>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: usize) -> <Wrapping<u64> as Shr<usize>>::Output

Performs the >> operation.

impl<'a> Shr<usize> for &'a Wrapping<u8>

type Output = <Wrapping<u8> as Shr<usize>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: usize) -> <Wrapping<u8> as Shr<usize>>::Output

Performs the >> operation.

impl<'a> Shr<usize> for &'a Wrapping<usize>

type Output = <Wrapping<usize> as Shr<usize>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: usize) -> <Wrapping<usize> as Shr<usize>>::Output

Performs the >> operation.

impl Shr<usize> for Wrapping<i128>

type Output = Wrapping<i128>

The resulting type after applying the >> operator.

fn shr(self, other: usize) -> Wrapping<i128>

Performs the >> operation.

impl Shr<usize> for Wrapping<i16>

type Output = Wrapping<i16>

The resulting type after applying the >> operator.

fn shr(self, other: usize) -> Wrapping<i16>

Performs the >> operation.

impl Shr<usize> for Wrapping<i32>

type Output = Wrapping<i32>

The resulting type after applying the >> operator.

fn shr(self, other: usize) -> Wrapping<i32>

Performs the >> operation.

impl Shr<usize> for Wrapping<i64>

type Output = Wrapping<i64>

The resulting type after applying the >> operator.

fn shr(self, other: usize) -> Wrapping<i64>

Performs the >> operation.

impl Shr<usize> for Wrapping<i8>

type Output = Wrapping<i8>

The resulting type after applying the >> operator.

fn shr(self, other: usize) -> Wrapping<i8>

Performs the >> operation.

impl Shr<usize> for Wrapping<isize>

type Output = Wrapping<isize>

The resulting type after applying the >> operator.

fn shr(self, other: usize) -> Wrapping<isize>

Performs the >> operation.

impl Shr<usize> for Wrapping<u128>

type Output = Wrapping<u128>

The resulting type after applying the >> operator.

fn shr(self, other: usize) -> Wrapping<u128>

Performs the >> operation.

impl Shr<usize> for Wrapping<u16>

type Output = Wrapping<u16>

The resulting type after applying the >> operator.

fn shr(self, other: usize) -> Wrapping<u16>

Performs the >> operation.

impl Shr<usize> for Wrapping<u32>

type Output = Wrapping<u32>

The resulting type after applying the >> operator.

fn shr(self, other: usize) -> Wrapping<u32>

Performs the >> operation.

impl Shr<usize> for Wrapping<u64>

type Output = Wrapping<u64>

The resulting type after applying the >> operator.

fn shr(self, other: usize) -> Wrapping<u64>

Performs the >> operation.

impl Shr<usize> for Wrapping<u8>

type Output = Wrapping<u8>

The resulting type after applying the >> operator.

fn shr(self, other: usize) -> Wrapping<u8>

Performs the >> operation.

impl Shr<usize> for Wrapping<usize>

type Output = Wrapping<usize>

The resulting type after applying the >> operator.

fn shr(self, other: usize) -> Wrapping<usize>

Performs the >> operation.

impl ShrAssign<&usize> for Wrapping<i128>

fn shr_assign(&mut self, other: &usize)

Performs the >>= operation.

impl ShrAssign<&usize> for Wrapping<i16>

fn shr_assign(&mut self, other: &usize)

Performs the >>= operation.

impl ShrAssign<&usize> for Wrapping<i32>

fn shr_assign(&mut self, other: &usize)

Performs the >>= operation.

impl ShrAssign<&usize> for Wrapping<i64>

fn shr_assign(&mut self, other: &usize)

Performs the >>= operation.

impl ShrAssign<&usize> for Wrapping<i8>

fn shr_assign(&mut self, other: &usize)

Performs the >>= operation.

impl ShrAssign<&usize> for Wrapping<isize>

fn shr_assign(&mut self, other: &usize)

Performs the >>= operation.

impl ShrAssign<&usize> for Wrapping<u128>

fn shr_assign(&mut self, other: &usize)

Performs the >>= operation.

impl ShrAssign<&usize> for Wrapping<u16>

fn shr_assign(&mut self, other: &usize)

Performs the >>= operation.

impl ShrAssign<&usize> for Wrapping<u32>

fn shr_assign(&mut self, other: &usize)

Performs the >>= operation.

impl ShrAssign<&usize> for Wrapping<u64>

fn shr_assign(&mut self, other: &usize)

Performs the >>= operation.

impl ShrAssign<&usize> for Wrapping<u8>

fn shr_assign(&mut self, other: &usize)

Performs the >>= operation.

impl ShrAssign<&usize> for Wrapping<usize>

fn shr_assign(&mut self, other: &usize)

Performs the >>= operation.

impl ShrAssign<usize> for Wrapping<i128>

fn shr_assign(&mut self, other: usize)

Performs the >>= operation.

impl ShrAssign<usize> for Wrapping<i16>

fn shr_assign(&mut self, other: usize)

Performs the >>= operation.

impl ShrAssign<usize> for Wrapping<i32>

fn shr_assign(&mut self, other: usize)

Performs the >>= operation.

impl ShrAssign<usize> for Wrapping<i64>

fn shr_assign(&mut self, other: usize)

Performs the >>= operation.

impl ShrAssign<usize> for Wrapping<i8>

fn shr_assign(&mut self, other: usize)

Performs the >>= operation.

impl ShrAssign<usize> for Wrapping<isize>

fn shr_assign(&mut self, other: usize)

Performs the >>= operation.

impl ShrAssign<usize> for Wrapping<u128>

fn shr_assign(&mut self, other: usize)

Performs the >>= operation.

impl ShrAssign<usize> for Wrapping<u16>

fn shr_assign(&mut self, other: usize)

Performs the >>= operation.

impl ShrAssign<usize> for Wrapping<u32>

fn shr_assign(&mut self, other: usize)

Performs the >>= operation.

impl ShrAssign<usize> for Wrapping<u64>

fn shr_assign(&mut self, other: usize)

Performs the >>= operation.

impl ShrAssign<usize> for Wrapping<u8>

fn shr_assign(&mut self, other: usize)

Performs the >>= operation.

impl ShrAssign<usize> for Wrapping<usize>

fn shr_assign(&mut self, other: usize)

Performs the >>= operation.

impl Sub<&Wrapping<i128>> for &Wrapping<i128>

type Output = <Wrapping<i128> as Sub>::Output

The resulting type after applying the - operator.

fn sub(self, other: &Wrapping<i128>) -> <Wrapping<i128> as Sub>::Output

Performs the - operation.

impl Sub<&Wrapping<i128>> for Wrapping<i128>

type Output = <Wrapping<i128> as Sub>::Output

The resulting type after applying the - operator.

fn sub(self, other: &Wrapping<i128>) -> <Wrapping<i128> as Sub>::Output

Performs the - operation.

impl Sub<&Wrapping<i16>> for &Wrapping<i16>

type Output = <Wrapping<i16> as Sub>::Output

The resulting type after applying the - operator.

fn sub(self, other: &Wrapping<i16>) -> <Wrapping<i16> as Sub>::Output

Performs the - operation.

impl Sub<&Wrapping<i16>> for Wrapping<i16>

type Output = <Wrapping<i16> as Sub>::Output

The resulting type after applying the - operator.

fn sub(self, other: &Wrapping<i16>) -> <Wrapping<i16> as Sub>::Output

Performs the - operation.

impl Sub<&Wrapping<i32>> for &Wrapping<i32>

type Output = <Wrapping<i32> as Sub>::Output

The resulting type after applying the - operator.

fn sub(self, other: &Wrapping<i32>) -> <Wrapping<i32> as Sub>::Output

Performs the - operation.

impl Sub<&Wrapping<i32>> for Wrapping<i32>

type Output = <Wrapping<i32> as Sub>::Output

The resulting type after applying the - operator.

fn sub(self, other: &Wrapping<i32>) -> <Wrapping<i32> as Sub>::Output

Performs the - operation.

impl Sub<&Wrapping<i64>> for &Wrapping<i64>

type Output = <Wrapping<i64> as Sub>::Output

The resulting type after applying the - operator.

fn sub(self, other: &Wrapping<i64>) -> <Wrapping<i64> as Sub>::Output

Performs the - operation.

impl Sub<&Wrapping<i64>> for Wrapping<i64>

type Output = <Wrapping<i64> as Sub>::Output

The resulting type after applying the - operator.

fn sub(self, other: &Wrapping<i64>) -> <Wrapping<i64> as Sub>::Output

Performs the - operation.

impl Sub<&Wrapping<i8>> for &Wrapping<i8>

type Output = <Wrapping<i8> as Sub>::Output

The resulting type after applying the - operator.

fn sub(self, other: &Wrapping<i8>) -> <Wrapping<i8> as Sub>::Output

Performs the - operation.

impl Sub<&Wrapping<i8>> for Wrapping<i8>

type Output = <Wrapping<i8> as Sub>::Output

The resulting type after applying the - operator.

fn sub(self, other: &Wrapping<i8>) -> <Wrapping<i8> as Sub>::Output

Performs the - operation.

impl Sub<&Wrapping<isize>> for &Wrapping<isize>

type Output = <Wrapping<isize> as Sub>::Output

The resulting type after applying the - operator.

fn sub(self, other: &Wrapping<isize>) -> <Wrapping<isize> as Sub>::Output

Performs the - operation.

impl Sub<&Wrapping<isize>> for Wrapping<isize>

type Output = <Wrapping<isize> as Sub>::Output

The resulting type after applying the - operator.

fn sub(self, other: &Wrapping<isize>) -> <Wrapping<isize> as Sub>::Output

Performs the - operation.

impl Sub<&Wrapping<u128>> for &Wrapping<u128>

type Output = <Wrapping<u128> as Sub>::Output

The resulting type after applying the - operator.

fn sub(self, other: &Wrapping<u128>) -> <Wrapping<u128> as Sub>::Output

Performs the - operation.

impl Sub<&Wrapping<u128>> for Wrapping<u128>

type Output = <Wrapping<u128> as Sub>::Output

The resulting type after applying the - operator.

fn sub(self, other: &Wrapping<u128>) -> <Wrapping<u128> as Sub>::Output

Performs the - operation.

impl Sub<&Wrapping<u16>> for &Wrapping<u16>

type Output = <Wrapping<u16> as Sub>::Output

The resulting type after applying the - operator.

fn sub(self, other: &Wrapping<u16>) -> <Wrapping<u16> as Sub>::Output

Performs the - operation.

impl Sub<&Wrapping<u16>> for Wrapping<u16>

type Output = <Wrapping<u16> as Sub>::Output

The resulting type after applying the - operator.

fn sub(self, other: &Wrapping<u16>) -> <Wrapping<u16> as Sub>::Output

Performs the - operation.

impl Sub<&Wrapping<u32>> for &Wrapping<u32>

type Output = <Wrapping<u32> as Sub>::Output

The resulting type after applying the - operator.

fn sub(self, other: &Wrapping<u32>) -> <Wrapping<u32> as Sub>::Output

Performs the - operation.

impl Sub<&Wrapping<u32>> for Wrapping<u32>

type Output = <Wrapping<u32> as Sub>::Output

The resulting type after applying the - operator.

fn sub(self, other: &Wrapping<u32>) -> <Wrapping<u32> as Sub>::Output

Performs the - operation.

impl Sub<&Wrapping<u64>> for &Wrapping<u64>

type Output = <Wrapping<u64> as Sub>::Output

The resulting type after applying the - operator.

fn sub(self, other: &Wrapping<u64>) -> <Wrapping<u64> as Sub>::Output

Performs the - operation.

impl Sub<&Wrapping<u64>> for Wrapping<u64>

type Output = <Wrapping<u64> as Sub>::Output

The resulting type after applying the - operator.

fn sub(self, other: &Wrapping<u64>) -> <Wrapping<u64> as Sub>::Output

Performs the - operation.

impl Sub<&Wrapping<u8>> for &Wrapping<u8>

type Output = <Wrapping<u8> as Sub>::Output

The resulting type after applying the - operator.

fn sub(self, other: &Wrapping<u8>) -> <Wrapping<u8> as Sub>::Output

Performs the - operation.

impl Sub<&Wrapping<u8>> for Wrapping<u8>

type Output = <Wrapping<u8> as Sub>::Output

The resulting type after applying the - operator.

fn sub(self, other: &Wrapping<u8>) -> <Wrapping<u8> as Sub>::Output

Performs the - operation.

impl Sub<&Wrapping<usize>> for &Wrapping<usize>

type Output = <Wrapping<usize> as Sub>::Output

The resulting type after applying the - operator.

fn sub(self, other: &Wrapping<usize>) -> <Wrapping<usize> as Sub>::Output

Performs the - operation.

impl Sub<&Wrapping<usize>> for Wrapping<usize>

type Output = <Wrapping<usize> as Sub>::Output

The resulting type after applying the - operator.

fn sub(self, other: &Wrapping<usize>) -> <Wrapping<usize> as Sub>::Output

Performs the - operation.

impl<'a> Sub<Wrapping<i128>> for &'a Wrapping<i128>

type Output = <Wrapping<i128> as Sub>::Output

The resulting type after applying the - operator.

fn sub(self, other: Wrapping<i128>) -> <Wrapping<i128> as Sub>::Output

Performs the - operation.

impl<'a> Sub<Wrapping<i16>> for &'a Wrapping<i16>

type Output = <Wrapping<i16> as Sub>::Output

The resulting type after applying the - operator.

fn sub(self, other: Wrapping<i16>) -> <Wrapping<i16> as Sub>::Output

Performs the - operation.

impl<'a> Sub<Wrapping<i32>> for &'a Wrapping<i32>

type Output = <Wrapping<i32> as Sub>::Output

The resulting type after applying the - operator.

fn sub(self, other: Wrapping<i32>) -> <Wrapping<i32> as Sub>::Output

Performs the - operation.

impl<'a> Sub<Wrapping<i64>> for &'a Wrapping<i64>

type Output = <Wrapping<i64> as Sub>::Output

The resulting type after applying the - operator.

fn sub(self, other: Wrapping<i64>) -> <Wrapping<i64> as Sub>::Output

Performs the - operation.

impl<'a> Sub<Wrapping<i8>> for &'a Wrapping<i8>

type Output = <Wrapping<i8> as Sub>::Output

The resulting type after applying the - operator.

fn sub(self, other: Wrapping<i8>) -> <Wrapping<i8> as Sub>::Output

Performs the - operation.

impl<'a> Sub<Wrapping<isize>> for &'a Wrapping<isize>

type Output = <Wrapping<isize> as Sub>::Output

The resulting type after applying the - operator.

fn sub(self, other: Wrapping<isize>) -> <Wrapping<isize> as Sub>::Output

Performs the - operation.

impl<'a> Sub<Wrapping<u128>> for &'a Wrapping<u128>

type Output = <Wrapping<u128> as Sub>::Output

The resulting type after applying the - operator.

fn sub(self, other: Wrapping<u128>) -> <Wrapping<u128> as Sub>::Output

Performs the - operation.

impl<'a> Sub<Wrapping<u16>> for &'a Wrapping<u16>

type Output = <Wrapping<u16> as Sub>::Output

The resulting type after applying the - operator.

fn sub(self, other: Wrapping<u16>) -> <Wrapping<u16> as Sub>::Output

Performs the - operation.

impl<'a> Sub<Wrapping<u32>> for &'a Wrapping<u32>

type Output = <Wrapping<u32> as Sub>::Output

The resulting type after applying the - operator.

fn sub(self, other: Wrapping<u32>) -> <Wrapping<u32> as Sub>::Output

Performs the - operation.

impl<'a> Sub<Wrapping<u64>> for &'a Wrapping<u64>

type Output = <Wrapping<u64> as Sub>::Output

The resulting type after applying the - operator.

fn sub(self, other: Wrapping<u64>) -> <Wrapping<u64> as Sub>::Output

Performs the - operation.

impl<'a> Sub<Wrapping<u8>> for &'a Wrapping<u8>

type Output = <Wrapping<u8> as Sub>::Output

The resulting type after applying the - operator.

fn sub(self, other: Wrapping<u8>) -> <Wrapping<u8> as Sub>::Output

Performs the - operation.

impl<'a> Sub<Wrapping<usize>> for &'a Wrapping<usize>

type Output = <Wrapping<usize> as Sub>::Output

The resulting type after applying the - operator.

fn sub(self, other: Wrapping<usize>) -> <Wrapping<usize> as Sub>::Output

Performs the - operation.

impl Sub for Wrapping<i128>

type Output = Wrapping<i128>

The resulting type after applying the - operator.

fn sub(self, other: Wrapping<i128>) -> Wrapping<i128>

Performs the - operation.

impl Sub for Wrapping<i16>

type Output = Wrapping<i16>

The resulting type after applying the - operator.

fn sub(self, other: Wrapping<i16>) -> Wrapping<i16>

Performs the - operation.

impl Sub for Wrapping<i32>

type Output = Wrapping<i32>

The resulting type after applying the - operator.

fn sub(self, other: Wrapping<i32>) -> Wrapping<i32>

Performs the - operation.

impl Sub for Wrapping<i64>

type Output = Wrapping<i64>

The resulting type after applying the - operator.

fn sub(self, other: Wrapping<i64>) -> Wrapping<i64>

Performs the - operation.

impl Sub for Wrapping<i8>

type Output = Wrapping<i8>

The resulting type after applying the - operator.

fn sub(self, other: Wrapping<i8>) -> Wrapping<i8>

Performs the - operation.

impl Sub for Wrapping<isize>

type Output = Wrapping<isize>

The resulting type after applying the - operator.

fn sub(self, other: Wrapping<isize>) -> Wrapping<isize>

Performs the - operation.

impl Sub for Wrapping<u128>

type Output = Wrapping<u128>

The resulting type after applying the - operator.

fn sub(self, other: Wrapping<u128>) -> Wrapping<u128>

Performs the - operation.

impl Sub for Wrapping<u16>

type Output = Wrapping<u16>

The resulting type after applying the - operator.

fn sub(self, other: Wrapping<u16>) -> Wrapping<u16>

Performs the - operation.

impl Sub for Wrapping<u32>

type Output = Wrapping<u32>

The resulting type after applying the - operator.

fn sub(self, other: Wrapping<u32>) -> Wrapping<u32>

Performs the - operation.

impl Sub for Wrapping<u64>

type Output = Wrapping<u64>

The resulting type after applying the - operator.

fn sub(self, other: Wrapping<u64>) -> Wrapping<u64>

Performs the - operation.

impl Sub for Wrapping<u8>

type Output = Wrapping<u8>

The resulting type after applying the - operator.

fn sub(self, other: Wrapping<u8>) -> Wrapping<u8>

Performs the - operation.

impl Sub for Wrapping<usize>

type Output = Wrapping<usize>

The resulting type after applying the - operator.

fn sub(self, other: Wrapping<usize>) -> Wrapping<usize>

Performs the - operation.

impl SubAssign<&Wrapping<i128>> for Wrapping<i128>

fn sub_assign(&mut self, other: &Wrapping<i128>)

Performs the -= operation.

impl SubAssign<&Wrapping<i16>> for Wrapping<i16>

fn sub_assign(&mut self, other: &Wrapping<i16>)

Performs the -= operation.

impl SubAssign<&Wrapping<i32>> for Wrapping<i32>

fn sub_assign(&mut self, other: &Wrapping<i32>)

Performs the -= operation.

impl SubAssign<&Wrapping<i64>> for Wrapping<i64>

fn sub_assign(&mut self, other: &Wrapping<i64>)

Performs the -= operation.

impl SubAssign<&Wrapping<i8>> for Wrapping<i8>

fn sub_assign(&mut self, other: &Wrapping<i8>)

Performs the -= operation.

impl SubAssign<&Wrapping<isize>> for Wrapping<isize>

fn sub_assign(&mut self, other: &Wrapping<isize>)

Performs the -= operation.

impl SubAssign<&Wrapping<u128>> for Wrapping<u128>

fn sub_assign(&mut self, other: &Wrapping<u128>)

Performs the -= operation.

impl SubAssign<&Wrapping<u16>> for Wrapping<u16>

fn sub_assign(&mut self, other: &Wrapping<u16>)

Performs the -= operation.

impl SubAssign<&Wrapping<u32>> for Wrapping<u32>

fn sub_assign(&mut self, other: &Wrapping<u32>)

Performs the -= operation.

impl SubAssign<&Wrapping<u64>> for Wrapping<u64>

fn sub_assign(&mut self, other: &Wrapping<u64>)

Performs the -= operation.

impl SubAssign<&Wrapping<u8>> for Wrapping<u8>

fn sub_assign(&mut self, other: &Wrapping<u8>)

Performs the -= operation.

impl SubAssign<&Wrapping<usize>> for Wrapping<usize>

fn sub_assign(&mut self, other: &Wrapping<usize>)

Performs the -= operation.

impl SubAssign<&i128> for Wrapping<i128>

fn sub_assign(&mut self, other: &i128)

Performs the -= operation.

impl SubAssign<&i16> for Wrapping<i16>

fn sub_assign(&mut self, other: &i16)

Performs the -= operation.

impl SubAssign<&i32> for Wrapping<i32>

fn sub_assign(&mut self, other: &i32)

Performs the -= operation.

impl SubAssign<&i64> for Wrapping<i64>

fn sub_assign(&mut self, other: &i64)

Performs the -= operation.

impl SubAssign<&i8> for Wrapping<i8>

fn sub_assign(&mut self, other: &i8)

Performs the -= operation.

impl SubAssign<&isize> for Wrapping<isize>

fn sub_assign(&mut self, other: &isize)

Performs the -= operation.

impl SubAssign<&u128> for Wrapping<u128>

fn sub_assign(&mut self, other: &u128)

Performs the -= operation.

impl SubAssign<&u16> for Wrapping<u16>

fn sub_assign(&mut self, other: &u16)

Performs the -= operation.

impl SubAssign<&u32> for Wrapping<u32>

fn sub_assign(&mut self, other: &u32)

Performs the -= operation.

impl SubAssign<&u64> for Wrapping<u64>

fn sub_assign(&mut self, other: &u64)

Performs the -= operation.

impl SubAssign<&u8> for Wrapping<u8>

fn sub_assign(&mut self, other: &u8)

Performs the -= operation.

impl SubAssign<&usize> for Wrapping<usize>

fn sub_assign(&mut self, other: &usize)

Performs the -= operation.

impl SubAssign<i128> for Wrapping<i128>

fn sub_assign(&mut self, other: i128)

Performs the -= operation.

impl SubAssign<i16> for Wrapping<i16>

fn sub_assign(&mut self, other: i16)

Performs the -= operation.

impl SubAssign<i32> for Wrapping<i32>

fn sub_assign(&mut self, other: i32)

Performs the -= operation.

impl SubAssign<i64> for Wrapping<i64>

fn sub_assign(&mut self, other: i64)

Performs the -= operation.

impl SubAssign<i8> for Wrapping<i8>

fn sub_assign(&mut self, other: i8)

Performs the -= operation.

impl SubAssign<isize> for Wrapping<isize>

fn sub_assign(&mut self, other: isize)

Performs the -= operation.

impl SubAssign<u128> for Wrapping<u128>

fn sub_assign(&mut self, other: u128)

Performs the -= operation.

impl SubAssign<u16> for Wrapping<u16>

fn sub_assign(&mut self, other: u16)

Performs the -= operation.

impl SubAssign<u32> for Wrapping<u32>

fn sub_assign(&mut self, other: u32)

Performs the -= operation.

impl SubAssign<u64> for Wrapping<u64>

fn sub_assign(&mut self, other: u64)

Performs the -= operation.

impl SubAssign<u8> for Wrapping<u8>

fn sub_assign(&mut self, other: u8)

Performs the -= operation.

impl SubAssign<usize> for Wrapping<usize>

fn sub_assign(&mut self, other: usize)

Performs the -= operation.

impl SubAssign for Wrapping<i128>

fn sub_assign(&mut self, other: Wrapping<i128>)

Performs the -= operation.

impl SubAssign for Wrapping<i16>

fn sub_assign(&mut self, other: Wrapping<i16>)

Performs the -= operation.

impl SubAssign for Wrapping<i32>

fn sub_assign(&mut self, other: Wrapping<i32>)

Performs the -= operation.

impl SubAssign for Wrapping<i64>

fn sub_assign(&mut self, other: Wrapping<i64>)

Performs the -= operation.

impl SubAssign for Wrapping<i8>

fn sub_assign(&mut self, other: Wrapping<i8>)

Performs the -= operation.

impl SubAssign for Wrapping<isize>

fn sub_assign(&mut self, other: Wrapping<isize>)

Performs the -= operation.

impl SubAssign for Wrapping<u128>

fn sub_assign(&mut self, other: Wrapping<u128>)

Performs the -= operation.

impl SubAssign for Wrapping<u16>

fn sub_assign(&mut self, other: Wrapping<u16>)

Performs the -= operation.

impl SubAssign for Wrapping<u32>

fn sub_assign(&mut self, other: Wrapping<u32>)

Performs the -= operation.

impl SubAssign for Wrapping<u64>

fn sub_assign(&mut self, other: Wrapping<u64>)

Performs the -= operation.

impl SubAssign for Wrapping<u8>

fn sub_assign(&mut self, other: Wrapping<u8>)

Performs the -= operation.

impl SubAssign for Wrapping<usize>

fn sub_assign(&mut self, other: Wrapping<usize>)

Performs the -= operation.

impl<'a> Sum<&'a Wrapping<i128>> for Wrapping<i128>

fn sum<I>(iter: I) -> Wrapping<i128>

where I: Iterator<Item = &'a Wrapping<i128>>,

Method which takes an iterator and generates Self from the elements by “summing up” the items.

impl<'a> Sum<&'a Wrapping<i16>> for Wrapping<i16>

fn sum<I>(iter: I) -> Wrapping<i16>

where I: Iterator<Item = &'a Wrapping<i16>>,

Method which takes an iterator and generates Self from the elements by “summing up” the items.

impl<'a> Sum<&'a Wrapping<i32>> for Wrapping<i32>

fn sum<I>(iter: I) -> Wrapping<i32>

where I: Iterator<Item = &'a Wrapping<i32>>,

Method which takes an iterator and generates Self from the elements by “summing up” the items.

impl<'a> Sum<&'a Wrapping<i64>> for Wrapping<i64>

fn sum<I>(iter: I) -> Wrapping<i64>

where I: Iterator<Item = &'a Wrapping<i64>>,

Method which takes an iterator and generates Self from the elements by “summing up” the items.

impl<'a> Sum<&'a Wrapping<i8>> for Wrapping<i8>

fn sum<I>(iter: I) -> Wrapping<i8>

where I: Iterator<Item = &'a Wrapping<i8>>,

Method which takes an iterator and generates Self from the elements by “summing up” the items.

impl<'a> Sum<&'a Wrapping<isize>> for Wrapping<isize>

fn sum<I>(iter: I) -> Wrapping<isize>

where I: Iterator<Item = &'a Wrapping<isize>>,

Method which takes an iterator and generates Self from the elements by “summing up” the items.

impl<'a> Sum<&'a Wrapping<u128>> for Wrapping<u128>

fn sum<I>(iter: I) -> Wrapping<u128>

where I: Iterator<Item = &'a Wrapping<u128>>,

Method which takes an iterator and generates Self from the elements by “summing up” the items.

impl<'a> Sum<&'a Wrapping<u16>> for Wrapping<u16>

fn sum<I>(iter: I) -> Wrapping<u16>

where I: Iterator<Item = &'a Wrapping<u16>>,

Method which takes an iterator and generates Self from the elements by “summing up” the items.

impl<'a> Sum<&'a Wrapping<u32>> for Wrapping<u32>

fn sum<I>(iter: I) -> Wrapping<u32>

where I: Iterator<Item = &'a Wrapping<u32>>,

Method which takes an iterator and generates Self from the elements by “summing up” the items.

impl<'a> Sum<&'a Wrapping<u64>> for Wrapping<u64>

fn sum<I>(iter: I) -> Wrapping<u64>

where I: Iterator<Item = &'a Wrapping<u64>>,

Method which takes an iterator and generates Self from the elements by “summing up” the items.

impl<'a> Sum<&'a Wrapping<u8>> for Wrapping<u8>

fn sum<I>(iter: I) -> Wrapping<u8>

where I: Iterator<Item = &'a Wrapping<u8>>,

Method which takes an iterator and generates Self from the elements by “summing up” the items.

impl<'a> Sum<&'a Wrapping<usize>> for Wrapping<usize>

fn sum<I>(iter: I) -> Wrapping<usize>

where I: Iterator<Item = &'a Wrapping<usize>>,

Method which takes an iterator and generates Self from the elements by “summing up” the items.

impl Sum for Wrapping<i128>

fn sum<I>(iter: I) -> Wrapping<i128>

where I: Iterator<Item = Wrapping<i128>>,

Method which takes an iterator and generates Self from the elements by “summing up” the items.

impl Sum for Wrapping<i16>

fn sum<I>(iter: I) -> Wrapping<i16>

where I: Iterator<Item = Wrapping<i16>>,

Method which takes an iterator and generates Self from the elements by “summing up” the items.

impl Sum for Wrapping<i32>

fn sum<I>(iter: I) -> Wrapping<i32>

where I: Iterator<Item = Wrapping<i32>>,

Method which takes an iterator and generates Self from the elements by “summing up” the items.

impl Sum for Wrapping<i64>

fn sum<I>(iter: I) -> Wrapping<i64>

where I: Iterator<Item = Wrapping<i64>>,

Method which takes an iterator and generates Self from the elements by “summing up” the items.

impl Sum for Wrapping<i8>

fn sum<I>(iter: I) -> Wrapping<i8>

where I: Iterator<Item = Wrapping<i8>>,

Method which takes an iterator and generates Self from the elements by “summing up” the items.

impl Sum for Wrapping<isize>

fn sum<I>(iter: I) -> Wrapping<isize>

where I: Iterator<Item = Wrapping<isize>>,

Method which takes an iterator and generates Self from the elements by “summing up” the items.

impl Sum for Wrapping<u128>

fn sum<I>(iter: I) -> Wrapping<u128>

where I: Iterator<Item = Wrapping<u128>>,

Method which takes an iterator and generates Self from the elements by “summing up” the items.

impl Sum for Wrapping<u16>

fn sum<I>(iter: I) -> Wrapping<u16>

where I: Iterator<Item = Wrapping<u16>>,

Method which takes an iterator and generates Self from the elements by “summing up” the items.

impl Sum for Wrapping<u32>

fn sum<I>(iter: I) -> Wrapping<u32>

where I: Iterator<Item = Wrapping<u32>>,

Method which takes an iterator and generates Self from the elements by “summing up” the items.

impl Sum for Wrapping<u64>

fn sum<I>(iter: I) -> Wrapping<u64>

where I: Iterator<Item = Wrapping<u64>>,

Method which takes an iterator and generates Self from the elements by “summing up” the items.

impl Sum for Wrapping<u8>

fn sum<I>(iter: I) -> Wrapping<u8>

where I: Iterator<Item = Wrapping<u8>>,

Method which takes an iterator and generates Self from the elements by “summing up” the items.

impl Sum for Wrapping<usize>

fn sum<I>(iter: I) -> Wrapping<usize>

where I: Iterator<Item = Wrapping<usize>>,

Method which takes an iterator and generates Self from the elements by “summing up” the items.

impl<T> UpperHex for Wrapping<T>

where T: UpperHex,

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.

impl<T> Value for Wrapping<T>

where T: Value,

fn record(&self, key: &Field, visitor: &mut dyn Visit)

Visits this value with the given Visitor.

impl<T> Copy for Wrapping<T>

where T: Copy,

impl<T> Eq for Wrapping<T>

where T: Eq,

impl<T> StructuralPartialEq for Wrapping<T>