Struct selectors::matching::ElementSelectorFlags

pub struct ElementSelectorFlags(<ElementSelectorFlags as PublicFlags>::Internal);

Set of flags that are set on either the element or its parent (depending on the flag) if the element could potentially match a selector.

Tuple Fields

0: <ElementSelectorFlags as PublicFlags>::Internal

Implementations

impl ElementSelectorFlags

pub const HAS_SLOW_SELECTOR: Self = _

When a child is added or removed from the parent, all the children must be restyled, because they may match :nth-last-child, :last-of-type, :nth-last-of-type, or :only-of-type.

pub const HAS_SLOW_SELECTOR_LATER_SIBLINGS: Self = _

When a child is added or removed from the parent, any later children must be restyled, because they may match :nth-child, :first-of-type, or :nth-of-type.

pub const HAS_SLOW_SELECTOR_NTH: Self = _

HAS_SLOW_SELECTOR* was set by the presence of :nth (But not of).

pub const HAS_SLOW_SELECTOR_NTH_OF: Self = _

When a DOM mutation occurs on a child that might be matched by :nth-last-child(.. of ), earlier children must be restyled, and HAS_SLOW_SELECTOR will be set (which normally indicates that all children will be restyled).

Similarly, when a DOM mutation occurs on a child that might be matched by :nth-child(.. of ), later children must be restyled, and HAS_SLOW_SELECTOR_LATER_SIBLINGS will be set.

pub const HAS_EDGE_CHILD_SELECTOR: Self = _

When a child is added or removed from the parent, the first and last children must be restyled, because they may match :first-child, :last-child, or :only-child.

pub const HAS_EMPTY_SELECTOR: Self = _

The element has an empty selector, so when a child is appended we might need to restyle the parent completely.

pub const ANCHORS_RELATIVE_SELECTOR: Self = _

The element may anchor a relative selector.

pub const ANCHORS_RELATIVE_SELECTOR_NON_SUBJECT: Self = _

The element may anchor a relative selector that is not the subject of the whole selector.

pub const RELATIVE_SELECTOR_SEARCH_DIRECTION_SIBLING: Self = _

The element is reached by a relative selector search in the sibling direction.

pub const RELATIVE_SELECTOR_SEARCH_DIRECTION_ANCESTOR: Self = _

The element is reached by a relative selector search in the ancestor direction.

pub const RELATIVE_SELECTOR_SEARCH_DIRECTION_ANCESTOR_SIBLING: Self = _

impl ElementSelectorFlags

pub const fn empty() -> Self

Get a flags value with all bits unset.

pub const fn all() -> Self

Get a flags value with all known bits set.

pub const fn bits(&self) -> usize

Get the underlying bits value.

The returned value is exactly the bits set in this flags value.

pub const fn from_bits(bits: usize) -> Option<Self>

Convert from a bits value.

This method will return None if any unknown bits are set.

pub const fn from_bits_truncate(bits: usize) -> Self

Convert from a bits value, unsetting any unknown bits.

pub const fn from_bits_retain(bits: usize) -> Self

Convert from a bits value exactly.

pub fn from_name(name: &str) -> Option<Self>

Get a flags value with the bits of a flag with the given name set.

This method will return None if name is empty or doesn’t correspond to any named flag.

pub const fn is_empty(&self) -> bool

Whether all bits in this flags value are unset.

pub const fn is_all(&self) -> bool

Whether all known bits in this flags value are set.

pub const fn intersects(&self, other: Self) -> bool

Whether any set bits in a source flags value are also set in a target flags value.

pub const fn contains(&self, other: Self) -> bool

Whether all set bits in a source flags value are also set in a target flags value.

pub fn insert(&mut self, other: Self)

The bitwise or (|) of the bits in two flags values.

pub fn remove(&mut self, other: Self)

The intersection of a source flags value with the complement of a target flags value (&!).

This method is not equivalent to self & !other when other has unknown bits set. remove won’t truncate other, but the ! operator will.

pub fn toggle(&mut self, other: Self)

The bitwise exclusive-or (^) of the bits in two flags values.

pub fn set(&mut self, other: Self, value: bool)

Call insert when value is true or remove when value is false.

pub const fn intersection(self, other: Self) -> Self

The bitwise and (&) of the bits in two flags values.

pub const fn union(self, other: Self) -> Self

The bitwise or (|) of the bits in two flags values.

pub const fn difference(self, other: Self) -> Self

The intersection of a source flags value with the complement of a target flags value (&!).

This method is not equivalent to self & !other when other has unknown bits set. difference won’t truncate other, but the ! operator will.

pub const fn symmetric_difference(self, other: Self) -> Self

The bitwise exclusive-or (^) of the bits in two flags values.

pub const fn complement(self) -> Self

The bitwise negation (!) of the bits in a flags value, truncating the result.

impl ElementSelectorFlags

pub const fn iter(&self) -> Iter<ElementSelectorFlags>

Yield a set of contained flags values.

Each yielded flags value will correspond to a defined named flag. Any unknown bits will be yielded together as a final flags value.

pub const fn iter_names(&self) -> IterNames<ElementSelectorFlags>

Yield a set of contained named flags values.

This method is like iter, except only yields bits in contained named flags. Any unknown bits, or bits not corresponding to a contained flag will not be yielded.

impl ElementSelectorFlags

pub fn for_self(self) -> ElementSelectorFlags

Returns the subset of flags that apply to the element.

pub fn for_parent(self) -> ElementSelectorFlags

Returns the subset of flags that apply to the parent.

Trait Implementations

impl Binary for ElementSelectorFlags

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl BitAnd for ElementSelectorFlags

fn bitand(self, other: Self) -> Self

The bitwise and (&) of the bits in two flags values.

type Output = ElementSelectorFlags

The resulting type after applying the & operator.

impl BitAndAssign for ElementSelectorFlags

fn bitand_assign(&mut self, other: Self)

The bitwise and (&) of the bits in two flags values.

impl BitOr for ElementSelectorFlags

fn bitor(self, other: ElementSelectorFlags) -> Self

The bitwise or (|) of the bits in two flags values.

type Output = ElementSelectorFlags

The resulting type after applying the | operator.

impl BitOrAssign for ElementSelectorFlags

fn bitor_assign(&mut self, other: Self)

The bitwise or (|) of the bits in two flags values.

impl BitXor for ElementSelectorFlags

fn bitxor(self, other: Self) -> Self

The bitwise exclusive-or (^) of the bits in two flags values.

type Output = ElementSelectorFlags

The resulting type after applying the ^ operator.

impl BitXorAssign for ElementSelectorFlags

fn bitxor_assign(&mut self, other: Self)

The bitwise exclusive-or (^) of the bits in two flags values.

impl Clone for ElementSelectorFlags

fn clone(&self) -> ElementSelectorFlags

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Extend<ElementSelectorFlags> for ElementSelectorFlags

fn extend<T: IntoIterator<Item = Self>>(&mut self, iterator: T)

The bitwise or (|) of the bits in each flags value.

fn extend_one(&mut self, item: A)

🔬This is a nightly-only experimental API. (extend_one)

Extends a collection with exactly one element.

fn extend_reserve(&mut self, additional: usize)

🔬This is a nightly-only experimental API. (extend_one)

Reserves capacity in a collection for the given number of additional elements.

impl Flags for ElementSelectorFlags

const FLAGS: &'static [Flag<ElementSelectorFlags>] = _

The set of defined flags.

type Bits = usize

The underlying bits type.

fn bits(&self) -> usize

Get the underlying bits value.

fn from_bits_retain(bits: usize) -> ElementSelectorFlags

Convert from a bits value exactly.

fn empty() -> Self

Get a flags value with all bits unset.

fn all() -> Self

Get a flags value with all known bits set.

fn from_bits(bits: Self::Bits) -> Option<Self>

Convert from a bits value.

fn from_bits_truncate(bits: Self::Bits) -> Self

Convert from a bits value, unsetting any unknown bits.

fn from_name(name: &str) -> Option<Self>

Get a flags value with the bits of a flag with the given name set.

fn iter(&self) -> Iter<Self>

Yield a set of contained flags values.

fn iter_names(&self) -> IterNames<Self>

Yield a set of contained named flags values.

fn is_empty(&self) -> bool

Whether all bits in this flags value are unset.

fn is_all(&self) -> bool

Whether all known bits in this flags value are set.

fn intersects(&self, other: Self) -> bool

where Self: Sized,

Whether any set bits in a source flags value are also set in a target flags value.

fn contains(&self, other: Self) -> bool

where Self: Sized,

Whether all set bits in a source flags value are also set in a target flags value.

fn insert(&mut self, other: Self)

where Self: Sized,

The bitwise or (|) of the bits in two flags values.

fn remove(&mut self, other: Self)

where Self: Sized,

The intersection of a source flags value with the complement of a target flags value (&!).

fn toggle(&mut self, other: Self)

where Self: Sized,

The bitwise exclusive-or (^) of the bits in two flags values.

fn set(&mut self, other: Self, value: bool)

where Self: Sized,

Call Flags::insert when value is true or Flags::remove when value is false.

fn intersection(self, other: Self) -> Self

The bitwise and (&) of the bits in two flags values.

fn union(self, other: Self) -> Self

The bitwise or (|) of the bits in two flags values.

fn difference(self, other: Self) -> Self

The intersection of a source flags value with the complement of a target flags value (&!).

fn symmetric_difference(self, other: Self) -> Self

The bitwise exclusive-or (^) of the bits in two flags values.

fn complement(self) -> Self

The bitwise negation (!) of the bits in a flags value, truncating the result.

impl FromIterator<ElementSelectorFlags> for ElementSelectorFlags

fn from_iter<T: IntoIterator<Item = Self>>(iterator: T) -> Self

The bitwise or (|) of the bits in each flags value.

impl IntoIterator for ElementSelectorFlags

type Item = ElementSelectorFlags

The type of the elements being iterated over.

type IntoIter = Iter<ElementSelectorFlags>

Which kind of iterator are we turning this into?

fn into_iter(self) -> Self::IntoIter

Creates an iterator from a value.

impl LowerHex for ElementSelectorFlags

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Not for ElementSelectorFlags

fn not(self) -> Self

The bitwise negation (!) of the bits in a flags value, truncating the result.

type Output = ElementSelectorFlags

The resulting type after applying the ! operator.

impl Octal for ElementSelectorFlags

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl PublicFlags for ElementSelectorFlags

type Primitive = usize

The type of the underlying storage.

type Internal = InternalBitFlags

The type of the internal field on the generated flags type.

impl Sub for ElementSelectorFlags

fn sub(self, other: Self) -> Self

The intersection of a source flags value with the complement of a target flags value (&!).

This method is not equivalent to self & !other when other has unknown bits set. difference won’t truncate other, but the ! operator will.

type Output = ElementSelectorFlags

The resulting type after applying the - operator.

impl SubAssign for ElementSelectorFlags

fn sub_assign(&mut self, other: Self)

The intersection of a source flags value with the complement of a target flags value (&!).

This method is not equivalent to self & !other when other has unknown bits set. difference won’t truncate other, but the ! operator will.

impl UpperHex for ElementSelectorFlags

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Copy for ElementSelectorFlags