Struct mio::unix::pipe::Receiver

pub struct Receiver {
    inner: IoSource<File>,
}

Receiving end of an Unix pipe.

See new for documentation, including examples.

Fields

inner: IoSource<File>

Implementations

impl Receiver

pub fn set_nonblocking(&self, nonblocking: bool) -> Result<()>

Set the Receiver into or out of non-blocking mode.

pub fn try_io<F, T>(&self, f: F) -> Result<T>

where F: FnOnce() -> Result<T>,

Execute an I/O operation ensuring that the socket receives more events if it hits a WouldBlock error.

Notes

This method is required to be called for all I/O operations to ensure the user will receive events once the socket is ready again after returning a WouldBlock error.

Examples

use std::io;
use std::os::fd::AsRawFd;
use mio::unix::pipe;

let (sender, receiver) = pipe::new()?;

// Wait until the sender is writable...

// Write to the sender using a direct libc call, of course the
// `io::Write` implementation would be easier to use.
let buf = b"hello";
let n = sender.try_io(|| {
    let buf_ptr = &buf as *const _ as *const _;
    let res = unsafe { libc::write(sender.as_raw_fd(), buf_ptr, buf.len()) };
    if res != -1 {
        Ok(res as usize)
    } else {
        // If EAGAIN or EWOULDBLOCK is set by libc::write, the closure
        // should return `WouldBlock` error.
        Err(io::Error::last_os_error())
    }
})?;
eprintln!("write {} bytes", n);

// Wait until the receiver is readable...

// Read from the receiver using a direct libc call, of course the
// `io::Read` implementation would be easier to use.
let mut buf = [0; 512];
let n = receiver.try_io(|| {
    let buf_ptr = &mut buf as *mut _ as *mut _;
    let res = unsafe { libc::read(receiver.as_raw_fd(), buf_ptr, buf.len()) };
    if res != -1 {
        Ok(res as usize)
    } else {
        // If EAGAIN or EWOULDBLOCK is set by libc::read, the closure
        // should return `WouldBlock` error.
        Err(io::Error::last_os_error())
    }
})?;
eprintln!("read {} bytes", n);

Trait Implementations

impl AsFd for Receiver

fn as_fd(&self) -> BorrowedFd<'_>

Borrows the file descriptor.

impl AsRawFd for Receiver

fn as_raw_fd(&self) -> RawFd

Extracts the raw file descriptor.

impl Debug for Receiver

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl From<ChildStderr> for Receiver

Notes

The underlying pipe is not set to non-blocking.

fn from(stderr: ChildStderr) -> Receiver

Converts to this type from the input type.

impl From<ChildStdout> for Receiver

Notes

The underlying pipe is not set to non-blocking.

fn from(stdout: ChildStdout) -> Receiver

Converts to this type from the input type.

impl From<OwnedFd> for Receiver

fn from(fd: OwnedFd) -> Self

Converts to this type from the input type.

impl From<Receiver> for OwnedFd

fn from(receiver: Receiver) -> Self

Converts to this type from the input type.

impl FromRawFd for Receiver

unsafe fn from_raw_fd(fd: RawFd) -> Receiver

Constructs a new instance of Self from the given raw file descriptor.

impl IntoRawFd for Receiver

fn into_raw_fd(self) -> RawFd

Consumes this object, returning the raw underlying file descriptor.

impl Read for &Receiver

fn read(&mut self, buf: &mut [u8]) -> Result<usize>

Pull some bytes from this source into the specified buffer, returning how many bytes were read.

fn read_vectored(&mut self, bufs: &mut [IoSliceMut<'_>]) -> Result<usize>

Like read, except that it reads into a slice of buffers.

fn is_read_vectored(&self) -> bool

🔬This is a nightly-only experimental API. (can_vector)

Determines if this Reader has an efficient read_vectored implementation.

fn read_to_end(&mut self, buf: &mut Vec<u8>) -> Result<usize, Error>

Reads all bytes until EOF in this source, placing them into buf.

fn read_to_string(&mut self, buf: &mut String) -> Result<usize, Error>

Reads all bytes until EOF in this source, appending them to buf.

fn read_exact(&mut self, buf: &mut [u8]) -> Result<(), Error>

Reads the exact number of bytes required to fill buf.

fn read_buf(&mut self, buf: BorrowedCursor<'_>) -> Result<(), Error>

🔬This is a nightly-only experimental API. (read_buf)

Pull some bytes from this source into the specified buffer.

fn read_buf_exact(&mut self, cursor: BorrowedCursor<'_>) -> Result<(), Error>

🔬This is a nightly-only experimental API. (read_buf)

Reads the exact number of bytes required to fill cursor.

fn by_ref(&mut self) -> &mut Self

where Self: Sized,

Creates a “by reference” adaptor for this instance of Read.

fn bytes(self) -> Bytes<Self>

where Self: Sized,

Transforms this Read instance to an Iterator over its bytes.

fn chain<R>(self, next: R) -> Chain<Self, R>

where R: Read, Self: Sized,

Creates an adapter which will chain this stream with another.

fn take(self, limit: u64) -> Take<Self>

where Self: Sized,

Creates an adapter which will read at most limit bytes from it.

impl Read for Receiver

fn read(&mut self, buf: &mut [u8]) -> Result<usize>

Pull some bytes from this source into the specified buffer, returning how many bytes were read.

fn read_vectored(&mut self, bufs: &mut [IoSliceMut<'_>]) -> Result<usize>

Like read, except that it reads into a slice of buffers.

fn is_read_vectored(&self) -> bool

🔬This is a nightly-only experimental API. (can_vector)

Determines if this Reader has an efficient read_vectored implementation.

fn read_to_end(&mut self, buf: &mut Vec<u8>) -> Result<usize, Error>

Reads all bytes until EOF in this source, placing them into buf.

fn read_to_string(&mut self, buf: &mut String) -> Result<usize, Error>

Reads all bytes until EOF in this source, appending them to buf.

fn read_exact(&mut self, buf: &mut [u8]) -> Result<(), Error>

Reads the exact number of bytes required to fill buf.

fn read_buf(&mut self, buf: BorrowedCursor<'_>) -> Result<(), Error>

🔬This is a nightly-only experimental API. (read_buf)

Pull some bytes from this source into the specified buffer.

fn read_buf_exact(&mut self, cursor: BorrowedCursor<'_>) -> Result<(), Error>

🔬This is a nightly-only experimental API. (read_buf)

Reads the exact number of bytes required to fill cursor.

fn by_ref(&mut self) -> &mut Self

where Self: Sized,

Creates a “by reference” adaptor for this instance of Read.

fn bytes(self) -> Bytes<Self>

where Self: Sized,

Transforms this Read instance to an Iterator over its bytes.

fn chain<R>(self, next: R) -> Chain<Self, R>

where R: Read, Self: Sized,

Creates an adapter which will chain this stream with another.

fn take(self, limit: u64) -> Take<Self>

where Self: Sized,

Creates an adapter which will read at most limit bytes from it.

impl Source for Receiver

fn register( &mut self, registry: &Registry, token: Token, interests: Interest, ) -> Result<()>

Register self with the given Registry instance.

fn reregister( &mut self, registry: &Registry, token: Token, interests: Interest, ) -> Result<()>

Re-register self with the given Registry instance.

fn deregister(&mut self, registry: &Registry) -> Result<()>

Deregister self from the given Registry instance.