Struct half::binary16::f16

#[repr(transparent)]
pub struct f16(u16);

A 16-bit floating point type implementing the IEEE 754-2008 standard binary16 a.k.a “half” format.

This 16-bit floating point type is intended for efficient storage where the full range and precision of a larger floating point value is not required.

Tuple Fields

0: u16

Implementations

impl f16

pub const fn from_bits(bits: u16) -> f16

Constructs a 16-bit floating point value from the raw bits.

pub fn from_f32(value: f32) -> f16

Constructs a 16-bit floating point value from a 32-bit floating point value.

This operation is lossy. If the 32-bit value is to large to fit in 16-bits, ±∞ will result. NaN values are preserved. 32-bit subnormal values are too tiny to be represented in 16-bits and result in ±0. Exponents that underflow the minimum 16-bit exponent will result in 16-bit subnormals or ±0. All other values are truncated and rounded to the nearest representable 16-bit value.

pub const fn from_f32_const(value: f32) -> f16

Constructs a 16-bit floating point value from a 32-bit floating point value.

This function is identical to from_f32 except it never uses hardware intrinsics, which allows it to be const. from_f32 should be preferred in any non-const context.

This operation is lossy. If the 32-bit value is to large to fit in 16-bits, ±∞ will result. NaN values are preserved. 32-bit subnormal values are too tiny to be represented in 16-bits and result in ±0. Exponents that underflow the minimum 16-bit exponent will result in 16-bit subnormals or ±0. All other values are truncated and rounded to the nearest representable 16-bit value.

pub fn from_f64(value: f64) -> f16

Constructs a 16-bit floating point value from a 64-bit floating point value.

This operation is lossy. If the 64-bit value is to large to fit in 16-bits, ±∞ will result. NaN values are preserved. 64-bit subnormal values are too tiny to be represented in 16-bits and result in ±0. Exponents that underflow the minimum 16-bit exponent will result in 16-bit subnormals or ±0. All other values are truncated and rounded to the nearest representable 16-bit value.

pub const fn from_f64_const(value: f64) -> f16

Constructs a 16-bit floating point value from a 64-bit floating point value.

This function is identical to from_f64 except it never uses hardware intrinsics, which allows it to be const. from_f64 should be preferred in any non-const context.

This operation is lossy. If the 64-bit value is to large to fit in 16-bits, ±∞ will result. NaN values are preserved. 64-bit subnormal values are too tiny to be represented in 16-bits and result in ±0. Exponents that underflow the minimum 16-bit exponent will result in 16-bit subnormals or ±0. All other values are truncated and rounded to the nearest representable 16-bit value.

pub const fn to_bits(self) -> u16

Converts a [f16] into the underlying bit representation.

pub const fn to_le_bytes(self) -> [u8; 2]

Returns the memory representation of the underlying bit representation as a byte array in little-endian byte order.

Examples

let bytes = f16::from_f32(12.5).to_le_bytes();
assert_eq!(bytes, [0x40, 0x4A]);

pub const fn to_be_bytes(self) -> [u8; 2]

Returns the memory representation of the underlying bit representation as a byte array in big-endian (network) byte order.

Examples

let bytes = f16::from_f32(12.5).to_be_bytes();
assert_eq!(bytes, [0x4A, 0x40]);

pub const fn to_ne_bytes(self) -> [u8; 2]

Returns the memory representation of the underlying bit representation as a byte array in native byte order.

As the target platform’s native endianness is used, portable code should use to_be_bytes or to_le_bytes, as appropriate, instead.

Examples

let bytes = f16::from_f32(12.5).to_ne_bytes();
assert_eq!(bytes, if cfg!(target_endian = "big") {
    [0x4A, 0x40]
} else {
    [0x40, 0x4A]
});

pub const fn from_le_bytes(bytes: [u8; 2]) -> f16

Creates a floating point value from its representation as a byte array in little endian.

Examples

let value = f16::from_le_bytes([0x40, 0x4A]);
assert_eq!(value, f16::from_f32(12.5));

pub const fn from_be_bytes(bytes: [u8; 2]) -> f16

Creates a floating point value from its representation as a byte array in big endian.

Examples

let value = f16::from_be_bytes([0x4A, 0x40]);
assert_eq!(value, f16::from_f32(12.5));

pub const fn from_ne_bytes(bytes: [u8; 2]) -> f16

Creates a floating point value from its representation as a byte array in native endian.

As the target platform’s native endianness is used, portable code likely wants to use from_be_bytes or from_le_bytes, as appropriate instead.

Examples

let value = f16::from_ne_bytes(if cfg!(target_endian = "big") {
    [0x4A, 0x40]
} else {
    [0x40, 0x4A]
});
assert_eq!(value, f16::from_f32(12.5));

pub fn to_f32(self) -> f32

Converts a [f16] value into a f32 value.

This conversion is lossless as all 16-bit floating point values can be represented exactly in 32-bit floating point.

pub const fn to_f32_const(self) -> f32

Converts a [f16] value into a f32 value.

This function is identical to to_f32 except it never uses hardware intrinsics, which allows it to be const. to_f32 should be preferred in any non-const context.

This conversion is lossless as all 16-bit floating point values can be represented exactly in 32-bit floating point.

pub fn to_f64(self) -> f64

Converts a [f16] value into a f64 value.

This conversion is lossless as all 16-bit floating point values can be represented exactly in 64-bit floating point.

pub const fn to_f64_const(self) -> f64

Converts a [f16] value into a f64 value.

This function is identical to to_f64 except it never uses hardware intrinsics, which allows it to be const. to_f64 should be preferred in any non-const context.

This conversion is lossless as all 16-bit floating point values can be represented exactly in 64-bit floating point.

pub const fn is_nan(self) -> bool

Returns true if this value is NaN and false otherwise.

Examples

let nan = f16::NAN;
let f = f16::from_f32(7.0_f32);

assert!(nan.is_nan());
assert!(!f.is_nan());

pub const fn is_infinite(self) -> bool

Returns true if this value is ±∞ and false. otherwise.

Examples

let f = f16::from_f32(7.0f32);
let inf = f16::INFINITY;
let neg_inf = f16::NEG_INFINITY;
let nan = f16::NAN;

assert!(!f.is_infinite());
assert!(!nan.is_infinite());

assert!(inf.is_infinite());
assert!(neg_inf.is_infinite());

pub const fn is_finite(self) -> bool

Returns true if this number is neither infinite nor NaN.

Examples

let f = f16::from_f32(7.0f32);
let inf = f16::INFINITY;
let neg_inf = f16::NEG_INFINITY;
let nan = f16::NAN;

assert!(f.is_finite());

assert!(!nan.is_finite());
assert!(!inf.is_finite());
assert!(!neg_inf.is_finite());

pub const fn is_normal(self) -> bool

Returns true if the number is neither zero, infinite, subnormal, or NaN.

Examples

let min = f16::MIN_POSITIVE;
let max = f16::MAX;
let lower_than_min = f16::from_f32(1.0e-10_f32);
let zero = f16::from_f32(0.0_f32);

assert!(min.is_normal());
assert!(max.is_normal());

assert!(!zero.is_normal());
assert!(!f16::NAN.is_normal());
assert!(!f16::INFINITY.is_normal());
// Values between `0` and `min` are Subnormal.
assert!(!lower_than_min.is_normal());

pub const fn classify(self) -> FpCategory

Returns the floating point category of the number.

If only one property is going to be tested, it is generally faster to use the specific predicate instead.

Examples

use std::num::FpCategory;

let num = f16::from_f32(12.4_f32);
let inf = f16::INFINITY;

assert_eq!(num.classify(), FpCategory::Normal);
assert_eq!(inf.classify(), FpCategory::Infinite);

pub const fn signum(self) -> f16

Returns a number that represents the sign of self.

• 1.0 if the number is positive, +0.0 or INFINITY
• -1.0 if the number is negative, -0.0 or NEG_INFINITY
• NAN if the number is NaN

Examples

let f = f16::from_f32(3.5_f32);

assert_eq!(f.signum(), f16::from_f32(1.0));
assert_eq!(f16::NEG_INFINITY.signum(), f16::from_f32(-1.0));

assert!(f16::NAN.signum().is_nan());

pub const fn is_sign_positive(self) -> bool

Returns true if and only if self has a positive sign, including +0.0, NaNs with a positive sign bit and +∞.

Examples

let nan = f16::NAN;
let f = f16::from_f32(7.0_f32);
let g = f16::from_f32(-7.0_f32);

assert!(f.is_sign_positive());
assert!(!g.is_sign_positive());
// `NaN` can be either positive or negative
assert!(nan.is_sign_positive() != nan.is_sign_negative());

pub const fn is_sign_negative(self) -> bool

Returns true if and only if self has a negative sign, including -0.0, NaNs with a negative sign bit and −∞.

Examples

let nan = f16::NAN;
let f = f16::from_f32(7.0f32);
let g = f16::from_f32(-7.0f32);

assert!(!f.is_sign_negative());
assert!(g.is_sign_negative());
// `NaN` can be either positive or negative
assert!(nan.is_sign_positive() != nan.is_sign_negative());

pub const fn copysign(self, sign: f16) -> f16

Returns a number composed of the magnitude of self and the sign of sign.

Equal to self if the sign of self and sign are the same, otherwise equal to -self. If self is NaN, then NaN with the sign of sign is returned.

Examples

let f = f16::from_f32(3.5);

assert_eq!(f.copysign(f16::from_f32(0.42)), f16::from_f32(3.5));
assert_eq!(f.copysign(f16::from_f32(-0.42)), f16::from_f32(-3.5));
assert_eq!((-f).copysign(f16::from_f32(0.42)), f16::from_f32(3.5));
assert_eq!((-f).copysign(f16::from_f32(-0.42)), f16::from_f32(-3.5));

assert!(f16::NAN.copysign(f16::from_f32(1.0)).is_nan());

pub fn max(self, other: f16) -> f16

Returns the maximum of the two numbers.

If one of the arguments is NaN, then the other argument is returned.

Examples

let x = f16::from_f32(1.0);
let y = f16::from_f32(2.0);

assert_eq!(x.max(y), y);

pub fn min(self, other: f16) -> f16

Returns the minimum of the two numbers.

If one of the arguments is NaN, then the other argument is returned.

Examples

let x = f16::from_f32(1.0);
let y = f16::from_f32(2.0);

assert_eq!(x.min(y), x);

pub fn clamp(self, min: f16, max: f16) -> f16

Restrict a value to a certain interval unless it is NaN.

Returns max if self is greater than max, and min if self is less than min. Otherwise this returns self.

Note that this function returns NaN if the initial value was NaN as well.

Panics

Panics if min > max, min is NaN, or max is NaN.

Examples

assert!(f16::from_f32(-3.0).clamp(f16::from_f32(-2.0), f16::from_f32(1.0)) == f16::from_f32(-2.0));
assert!(f16::from_f32(0.0).clamp(f16::from_f32(-2.0), f16::from_f32(1.0)) == f16::from_f32(0.0));
assert!(f16::from_f32(2.0).clamp(f16::from_f32(-2.0), f16::from_f32(1.0)) == f16::from_f32(1.0));
assert!(f16::NAN.clamp(f16::from_f32(-2.0), f16::from_f32(1.0)).is_nan());

pub fn total_cmp(&self, other: &Self) -> Ordering

Returns the ordering between self and other.

Unlike the standard partial comparison between floating point numbers, this comparison always produces an ordering in accordance to the totalOrder predicate as defined in the IEEE 754 (2008 revision) floating point standard. The values are ordered in the following sequence:

• negative quiet NaN
• negative signaling NaN
• negative infinity
• negative numbers
• negative subnormal numbers
• negative zero
• positive zero
• positive subnormal numbers
• positive numbers
• positive infinity
• positive signaling NaN
• positive quiet NaN.

The ordering established by this function does not always agree with the PartialOrd and PartialEq implementations of f16. For example, they consider negative and positive zero equal, while total_cmp doesn’t.

The interpretation of the signaling NaN bit follows the definition in the IEEE 754 standard, which may not match the interpretation by some of the older, non-conformant (e.g. MIPS) hardware implementations.

Examples

let mut v: Vec<f16> = vec![];
v.push(f16::ONE);
v.push(f16::INFINITY);
v.push(f16::NEG_INFINITY);
v.push(f16::NAN);
v.push(f16::MAX_SUBNORMAL);
v.push(-f16::MAX_SUBNORMAL);
v.push(f16::ZERO);
v.push(f16::NEG_ZERO);
v.push(f16::NEG_ONE);
v.push(f16::MIN_POSITIVE);

v.sort_by(|a, b| a.total_cmp(&b));

assert!(v
    .into_iter()
    .zip(
        [
            f16::NEG_INFINITY,
            f16::NEG_ONE,
            -f16::MAX_SUBNORMAL,
            f16::NEG_ZERO,
            f16::ZERO,
            f16::MAX_SUBNORMAL,
            f16::MIN_POSITIVE,
            f16::ONE,
            f16::INFINITY,
            f16::NAN
        ]
        .iter()
    )
    .all(|(a, b)| a.to_bits() == b.to_bits()));

pub const DIGITS: u32 = 3u32

Approximate number of [f16] significant digits in base 10

pub const EPSILON: f16 = _

[f16] machine epsilon value

This is the difference between 1.0 and the next largest representable number.

pub const INFINITY: f16 = _

[f16] positive Infinity (+∞)

pub const MANTISSA_DIGITS: u32 = 11u32

Number of [f16] significant digits in base 2

pub const MAX: f16 = _

Largest finite [f16] value

pub const MAX_10_EXP: i32 = 4i32

Maximum possible [f16] power of 10 exponent

pub const MAX_EXP: i32 = 16i32

Maximum possible [f16] power of 2 exponent

pub const MIN: f16 = _

Smallest finite [f16] value

pub const MIN_10_EXP: i32 = -4i32

Minimum possible normal [f16] power of 10 exponent

pub const MIN_EXP: i32 = -13i32

One greater than the minimum possible normal [f16] power of 2 exponent

pub const MIN_POSITIVE: f16 = _

Smallest positive normal [f16] value

pub const NAN: f16 = _

[f16] Not a Number (NaN)

pub const NEG_INFINITY: f16 = _

[f16] negative infinity (-∞)

pub const RADIX: u32 = 2u32

The radix or base of the internal representation of [f16]

pub const MIN_POSITIVE_SUBNORMAL: f16 = _

Minimum positive subnormal [f16] value

pub const MAX_SUBNORMAL: f16 = _

Maximum subnormal [f16] value

pub const ONE: f16 = _

[f16] 1

pub const ZERO: f16 = _

[f16] 0

pub const NEG_ZERO: f16 = _

[f16] -0

pub const NEG_ONE: f16 = _

[f16] -1

pub const E: f16 = _

[f16] Euler’s number (ℯ)

pub const PI: f16 = _

[f16] Archimedes’ constant (π)

pub const FRAC_1_PI: f16 = _

[f16] 1/π

pub const FRAC_1_SQRT_2: f16 = _

[f16] 1/√2

pub const FRAC_2_PI: f16 = _

[f16] 2/π

pub const FRAC_2_SQRT_PI: f16 = _

[f16] 2/√π

pub const FRAC_PI_2: f16 = _

[f16] π/2

pub const FRAC_PI_3: f16 = _

[f16] π/3

pub const FRAC_PI_4: f16 = _

[f16] π/4

pub const FRAC_PI_6: f16 = _

[f16] π/6

pub const FRAC_PI_8: f16 = _

[f16] π/8

pub const LN_10: f16 = _

[f16] 𝗅𝗇 10

pub const LN_2: f16 = _

[f16] 𝗅𝗇 2

pub const LOG10_E: f16 = _

[f16] 𝗅𝗈𝗀₁₀ℯ

pub const LOG10_2: f16 = _

[f16] 𝗅𝗈𝗀₁₀2

pub const LOG2_E: f16 = _

[f16] 𝗅𝗈𝗀₂ℯ

pub const LOG2_10: f16 = _

[f16] 𝗅𝗈𝗀₂10

pub const SQRT_2: f16 = _

[f16] √2

Trait Implementations

impl Add<&f16> for &f16

type Output = <f16 as Add>::Output

The resulting type after applying the + operator.

fn add(self, rhs: &f16) -> Self::Output

Performs the + operation.

impl Add<&f16> for f16

type Output = <f16 as Add>::Output

The resulting type after applying the + operator.

fn add(self, rhs: &f16) -> Self::Output

Performs the + operation.

impl Add<f16> for &f16

type Output = <f16 as Add>::Output

The resulting type after applying the + operator.

fn add(self, rhs: f16) -> Self::Output

Performs the + operation.

impl Add for f16

type Output = f16

The resulting type after applying the + operator.

fn add(self, rhs: Self) -> Self::Output

Performs the + operation.

impl AddAssign<&f16> for f16

fn add_assign(&mut self, rhs: &f16)

Performs the += operation.

impl AddAssign for f16

fn add_assign(&mut self, rhs: Self)

Performs the += operation.

impl Binary for f16

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.

impl Clone for f16

fn clone(&self) -> f16

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for f16

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.

impl Default for f16

fn default() -> f16

Returns the “default value” for a type.

impl Display for f16

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.

impl Div<&f16> for &f16

type Output = <f16 as Div>::Output

The resulting type after applying the / operator.

fn div(self, rhs: &f16) -> Self::Output

Performs the / operation.

impl Div<&f16> for f16

type Output = <f16 as Div>::Output

The resulting type after applying the / operator.

fn div(self, rhs: &f16) -> Self::Output

Performs the / operation.

impl Div<f16> for &f16

type Output = <f16 as Div>::Output

The resulting type after applying the / operator.

fn div(self, rhs: f16) -> Self::Output

Performs the / operation.

impl Div for f16

type Output = f16

The resulting type after applying the / operator.

fn div(self, rhs: Self) -> Self::Output

Performs the / operation.

impl DivAssign<&f16> for f16

fn div_assign(&mut self, rhs: &f16)

Performs the /= operation.

impl DivAssign for f16

fn div_assign(&mut self, rhs: Self)

Performs the /= operation.

impl From<f16> for f32

fn from(x: f16) -> f32

Converts to this type from the input type.

impl From<f16> for f64

fn from(x: f16) -> f64

Converts to this type from the input type.

impl From<i8> for f16

fn from(x: i8) -> f16

Converts to this type from the input type.

impl From<u8> for f16

fn from(x: u8) -> f16

Converts to this type from the input type.

impl FromStr for f16

type Err = ParseFloatError

The associated error which can be returned from parsing.

fn from_str(src: &str) -> Result<f16, ParseFloatError>

Parses a string s to return a value of this type.

impl LowerExp for f16

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.

impl LowerHex for f16

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.

impl Mul<&f16> for &f16

type Output = <f16 as Mul>::Output

The resulting type after applying the * operator.

fn mul(self, rhs: &f16) -> Self::Output

Performs the * operation.

impl Mul<&f16> for f16

type Output = <f16 as Mul>::Output

The resulting type after applying the * operator.

fn mul(self, rhs: &f16) -> Self::Output

Performs the * operation.

impl Mul<f16> for &f16

type Output = <f16 as Mul>::Output

The resulting type after applying the * operator.

fn mul(self, rhs: f16) -> Self::Output

Performs the * operation.

impl Mul for f16

type Output = f16

The resulting type after applying the * operator.

fn mul(self, rhs: Self) -> Self::Output

Performs the * operation.

impl MulAssign<&f16> for f16

fn mul_assign(&mut self, rhs: &f16)

Performs the *= operation.

impl MulAssign for f16

fn mul_assign(&mut self, rhs: Self)

Performs the *= operation.

impl Neg for &f16

type Output = <f16 as Neg>::Output

The resulting type after applying the - operator.

fn neg(self) -> Self::Output

Performs the unary - operation.

impl Neg for f16

type Output = f16

The resulting type after applying the - operator.

fn neg(self) -> Self::Output

Performs the unary - operation.

impl Octal for f16

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.

impl PartialEq for f16

fn eq(&self, other: &f16) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialOrd for f16

fn partial_cmp(&self, other: &f16) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &f16) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &f16) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &f16) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &f16) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

impl<'a> Product<&'a f16> for f16

fn product<I: Iterator<Item = &'a f16>>(iter: I) -> Self

Takes an iterator and generates Self from the elements by multiplying the items.

impl Product for f16

fn product<I: Iterator<Item = Self>>(iter: I) -> Self

Takes an iterator and generates Self from the elements by multiplying the items.

impl Rem<&f16> for &f16

type Output = <f16 as Rem>::Output

The resulting type after applying the % operator.

fn rem(self, rhs: &f16) -> Self::Output

Performs the % operation.

impl Rem<&f16> for f16

type Output = <f16 as Rem>::Output

The resulting type after applying the % operator.

fn rem(self, rhs: &f16) -> Self::Output

Performs the % operation.

impl Rem<f16> for &f16

type Output = <f16 as Rem>::Output

The resulting type after applying the % operator.

fn rem(self, rhs: f16) -> Self::Output

Performs the % operation.

impl Rem for f16

type Output = f16

The resulting type after applying the % operator.

fn rem(self, rhs: Self) -> Self::Output

Performs the % operation.

impl RemAssign<&f16> for f16

fn rem_assign(&mut self, rhs: &f16)

Performs the %= operation.

impl RemAssign for f16

fn rem_assign(&mut self, rhs: Self)

Performs the %= operation.

impl Sub<&f16> for &f16

type Output = <f16 as Sub>::Output

The resulting type after applying the - operator.

fn sub(self, rhs: &f16) -> Self::Output

Performs the - operation.

impl Sub<&f16> for f16

type Output = <f16 as Sub>::Output

The resulting type after applying the - operator.

fn sub(self, rhs: &f16) -> Self::Output

Performs the - operation.

impl Sub<f16> for &f16

type Output = <f16 as Sub>::Output

The resulting type after applying the - operator.

fn sub(self, rhs: f16) -> Self::Output

Performs the - operation.

impl Sub for f16

type Output = f16

The resulting type after applying the - operator.

fn sub(self, rhs: Self) -> Self::Output

Performs the - operation.

impl SubAssign<&f16> for f16

fn sub_assign(&mut self, rhs: &f16)

Performs the -= operation.

impl SubAssign for f16

fn sub_assign(&mut self, rhs: Self)

Performs the -= operation.

impl<'a> Sum<&'a f16> for f16

fn sum<I: Iterator<Item = &'a f16>>(iter: I) -> Self

Takes an iterator and generates Self from the elements by “summing up” the items.

impl Sum for f16

fn sum<I: Iterator<Item = Self>>(iter: I) -> Self

Takes an iterator and generates Self from the elements by “summing up” the items.

impl UpperExp for f16

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.

impl UpperHex for f16

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.

impl Copy for f16

impl SealedHalf for f16