Trait bytes::buf::BufMut

source ·
pub unsafe trait BufMut {
Show 48 methods // Required methods fn remaining_mut(&self) -> usize; unsafe fn advance_mut(&mut self, cnt: usize); fn chunk_mut(&mut self) -> &mut UninitSlice; // Provided methods fn has_remaining_mut(&self) -> bool { ... } fn put<T: Buf>(&mut self, src: T) where Self: Sized { ... } fn put_slice(&mut self, src: &[u8]) { ... } fn put_bytes(&mut self, val: u8, cnt: usize) { ... } fn put_u8(&mut self, n: u8) { ... } fn put_i8(&mut self, n: i8) { ... } fn put_u16(&mut self, n: u16) { ... } fn put_u16_le(&mut self, n: u16) { ... } fn put_u16_ne(&mut self, n: u16) { ... } fn put_i16(&mut self, n: i16) { ... } fn put_i16_le(&mut self, n: i16) { ... } fn put_i16_ne(&mut self, n: i16) { ... } fn put_u32(&mut self, n: u32) { ... } fn put_u32_le(&mut self, n: u32) { ... } fn put_u32_ne(&mut self, n: u32) { ... } fn put_i32(&mut self, n: i32) { ... } fn put_i32_le(&mut self, n: i32) { ... } fn put_i32_ne(&mut self, n: i32) { ... } fn put_u64(&mut self, n: u64) { ... } fn put_u64_le(&mut self, n: u64) { ... } fn put_u64_ne(&mut self, n: u64) { ... } fn put_i64(&mut self, n: i64) { ... } fn put_i64_le(&mut self, n: i64) { ... } fn put_i64_ne(&mut self, n: i64) { ... } fn put_u128(&mut self, n: u128) { ... } fn put_u128_le(&mut self, n: u128) { ... } fn put_u128_ne(&mut self, n: u128) { ... } fn put_i128(&mut self, n: i128) { ... } fn put_i128_le(&mut self, n: i128) { ... } fn put_i128_ne(&mut self, n: i128) { ... } fn put_uint(&mut self, n: u64, nbytes: usize) { ... } fn put_uint_le(&mut self, n: u64, nbytes: usize) { ... } fn put_uint_ne(&mut self, n: u64, nbytes: usize) { ... } fn put_int(&mut self, n: i64, nbytes: usize) { ... } fn put_int_le(&mut self, n: i64, nbytes: usize) { ... } fn put_int_ne(&mut self, n: i64, nbytes: usize) { ... } fn put_f32(&mut self, n: f32) { ... } fn put_f32_le(&mut self, n: f32) { ... } fn put_f32_ne(&mut self, n: f32) { ... } fn put_f64(&mut self, n: f64) { ... } fn put_f64_le(&mut self, n: f64) { ... } fn put_f64_ne(&mut self, n: f64) { ... } fn limit(self, limit: usize) -> Limit<Self> where Self: Sized { ... } fn writer(self) -> Writer<Self> where Self: Sized { ... } fn chain_mut<U: BufMut>(self, next: U) -> Chain<Self, U> where Self: Sized { ... }
}
Expand description

A trait for values that provide sequential write access to bytes.

Write bytes to a buffer

A buffer stores bytes in memory such that write operations are infallible. The underlying storage may or may not be in contiguous memory. A BufMut value is a cursor into the buffer. Writing to BufMut advances the cursor position.

The simplest BufMut is a Vec<u8>.

use bytes::BufMut;

let mut buf = vec![];

buf.put(&b"hello world"[..]);

assert_eq!(buf, b"hello world");

Required Methods§

source

fn remaining_mut(&self) -> usize

Returns the number of bytes that can be written from the current position until the end of the buffer is reached.

This value is greater than or equal to the length of the slice returned by chunk_mut().

Writing to a BufMut may involve allocating more memory on the fly. Implementations may fail before reaching the number of bytes indicated by this method if they encounter an allocation failure.

Examples
use bytes::BufMut;

let mut dst = [0; 10];
let mut buf = &mut dst[..];

let original_remaining = buf.remaining_mut();
buf.put(&b"hello"[..]);

assert_eq!(original_remaining - 5, buf.remaining_mut());
Implementer notes

Implementations of remaining_mut should ensure that the return value does not change unless a call is made to advance_mut or any other function that is documented to change the BufMut’s current position.

Note

remaining_mut may return value smaller than actual available space.

source

unsafe fn advance_mut(&mut self, cnt: usize)

Advance the internal cursor of the BufMut

The next call to chunk_mut will return a slice starting cnt bytes further into the underlying buffer.

Safety

The caller must ensure that the next cnt bytes of chunk are initialized.

Examples
use bytes::BufMut;

let mut buf = Vec::with_capacity(16);

// Write some data
buf.chunk_mut()[0..2].copy_from_slice(b"he");
unsafe { buf.advance_mut(2) };

// write more bytes
buf.chunk_mut()[0..3].copy_from_slice(b"llo");

unsafe { buf.advance_mut(3); }

assert_eq!(5, buf.len());
assert_eq!(buf, b"hello");
Panics

This function may panic if cnt > self.remaining_mut().

Implementer notes

It is recommended for implementations of advance_mut to panic if cnt > self.remaining_mut(). If the implementation does not panic, the call must behave as if cnt == self.remaining_mut().

A call with cnt == 0 should never panic and be a no-op.

source

fn chunk_mut(&mut self) -> &mut UninitSlice

Returns a mutable slice starting at the current BufMut position and of length between 0 and BufMut::remaining_mut(). Note that this can be shorter than the whole remainder of the buffer (this allows non-continuous implementation).

This is a lower level function. Most operations are done with other functions.

The returned byte slice may represent uninitialized memory.

Examples
use bytes::BufMut;

let mut buf = Vec::with_capacity(16);

unsafe {
    // MaybeUninit::as_mut_ptr
    buf.chunk_mut()[0..].as_mut_ptr().write(b'h');
    buf.chunk_mut()[1..].as_mut_ptr().write(b'e');

    buf.advance_mut(2);

    buf.chunk_mut()[0..].as_mut_ptr().write(b'l');
    buf.chunk_mut()[1..].as_mut_ptr().write(b'l');
    buf.chunk_mut()[2..].as_mut_ptr().write(b'o');

    buf.advance_mut(3);
}

assert_eq!(5, buf.len());
assert_eq!(buf, b"hello");
Implementer notes

This function should never panic. chunk_mut should return an empty slice if and only if remaining_mut() returns 0. In other words, chunk_mut() returning an empty slice implies that remaining_mut() will return 0 and remaining_mut() returning 0 implies that chunk_mut() will return an empty slice.

This function may trigger an out-of-memory abort if it tries to allocate memory and fails to do so.

Provided Methods§

source

fn has_remaining_mut(&self) -> bool

Returns true if there is space in self for more bytes.

This is equivalent to self.remaining_mut() != 0.

Examples
use bytes::BufMut;

let mut dst = [0; 5];
let mut buf = &mut dst[..];

assert!(buf.has_remaining_mut());

buf.put(&b"hello"[..]);

assert!(!buf.has_remaining_mut());
source

fn put<T: Buf>(&mut self, src: T)where Self: Sized,

Transfer bytes into self from src and advance the cursor by the number of bytes written.

Examples
use bytes::BufMut;

let mut buf = vec![];

buf.put_u8(b'h');
buf.put(&b"ello"[..]);
buf.put(&b" world"[..]);

assert_eq!(buf, b"hello world");
Panics

Panics if self does not have enough capacity to contain src.

source

fn put_slice(&mut self, src: &[u8])

Transfer bytes into self from src and advance the cursor by the number of bytes written.

self must have enough remaining capacity to contain all of src.

use bytes::BufMut;

let mut dst = [0; 6];

{
    let mut buf = &mut dst[..];
    buf.put_slice(b"hello");

    assert_eq!(1, buf.remaining_mut());
}

assert_eq!(b"hello\0", &dst);
source

fn put_bytes(&mut self, val: u8, cnt: usize)

Put cnt bytes val into self.

Logically equivalent to calling self.put_u8(val) cnt times, but may work faster.

self must have at least cnt remaining capacity.

use bytes::BufMut;

let mut dst = [0; 6];

{
    let mut buf = &mut dst[..];
    buf.put_bytes(b'a', 4);

    assert_eq!(2, buf.remaining_mut());
}

assert_eq!(b"aaaa\0\0", &dst);
Panics

This function panics if there is not enough remaining capacity in self.

source

fn put_u8(&mut self, n: u8)

Writes an unsigned 8 bit integer to self.

The current position is advanced by 1.

Examples
use bytes::BufMut;

let mut buf = vec![];
buf.put_u8(0x01);
assert_eq!(buf, b"\x01");
Panics

This function panics if there is not enough remaining capacity in self.

source

fn put_i8(&mut self, n: i8)

Writes a signed 8 bit integer to self.

The current position is advanced by 1.

Examples
use bytes::BufMut;

let mut buf = vec![];
buf.put_i8(0x01);
assert_eq!(buf, b"\x01");
Panics

This function panics if there is not enough remaining capacity in self.

source

fn put_u16(&mut self, n: u16)

Writes an unsigned 16 bit integer to self in big-endian byte order.

The current position is advanced by 2.

Examples
use bytes::BufMut;

let mut buf = vec![];
buf.put_u16(0x0809);
assert_eq!(buf, b"\x08\x09");
Panics

This function panics if there is not enough remaining capacity in self.

source

fn put_u16_le(&mut self, n: u16)

Writes an unsigned 16 bit integer to self in little-endian byte order.

The current position is advanced by 2.

Examples
use bytes::BufMut;

let mut buf = vec![];
buf.put_u16_le(0x0809);
assert_eq!(buf, b"\x09\x08");
Panics

This function panics if there is not enough remaining capacity in self.

source

fn put_u16_ne(&mut self, n: u16)

Writes an unsigned 16 bit integer to self in native-endian byte order.

The current position is advanced by 2.

Examples
use bytes::BufMut;

let mut buf = vec![];
buf.put_u16_ne(0x0809);
if cfg!(target_endian = "big") {
    assert_eq!(buf, b"\x08\x09");
} else {
    assert_eq!(buf, b"\x09\x08");
}
Panics

This function panics if there is not enough remaining capacity in self.

source

fn put_i16(&mut self, n: i16)

Writes a signed 16 bit integer to self in big-endian byte order.

The current position is advanced by 2.

Examples
use bytes::BufMut;

let mut buf = vec![];
buf.put_i16(0x0809);
assert_eq!(buf, b"\x08\x09");
Panics

This function panics if there is not enough remaining capacity in self.

source

fn put_i16_le(&mut self, n: i16)

Writes a signed 16 bit integer to self in little-endian byte order.

The current position is advanced by 2.

Examples
use bytes::BufMut;

let mut buf = vec![];
buf.put_i16_le(0x0809);
assert_eq!(buf, b"\x09\x08");
Panics

This function panics if there is not enough remaining capacity in self.

source

fn put_i16_ne(&mut self, n: i16)

Writes a signed 16 bit integer to self in native-endian byte order.

The current position is advanced by 2.

Examples
use bytes::BufMut;

let mut buf = vec![];
buf.put_i16_ne(0x0809);
if cfg!(target_endian = "big") {
    assert_eq!(buf, b"\x08\x09");
} else {
    assert_eq!(buf, b"\x09\x08");
}
Panics

This function panics if there is not enough remaining capacity in self.

source

fn put_u32(&mut self, n: u32)

Writes an unsigned 32 bit integer to self in big-endian byte order.

The current position is advanced by 4.

Examples
use bytes::BufMut;

let mut buf = vec![];
buf.put_u32(0x0809A0A1);
assert_eq!(buf, b"\x08\x09\xA0\xA1");
Panics

This function panics if there is not enough remaining capacity in self.

source

fn put_u32_le(&mut self, n: u32)

Writes an unsigned 32 bit integer to self in little-endian byte order.

The current position is advanced by 4.

Examples
use bytes::BufMut;

let mut buf = vec![];
buf.put_u32_le(0x0809A0A1);
assert_eq!(buf, b"\xA1\xA0\x09\x08");
Panics

This function panics if there is not enough remaining capacity in self.

source

fn put_u32_ne(&mut self, n: u32)

Writes an unsigned 32 bit integer to self in native-endian byte order.

The current position is advanced by 4.

Examples
use bytes::BufMut;

let mut buf = vec![];
buf.put_u32_ne(0x0809A0A1);
if cfg!(target_endian = "big") {
    assert_eq!(buf, b"\x08\x09\xA0\xA1");
} else {
    assert_eq!(buf, b"\xA1\xA0\x09\x08");
}
Panics

This function panics if there is not enough remaining capacity in self.

source

fn put_i32(&mut self, n: i32)

Writes a signed 32 bit integer to self in big-endian byte order.

The current position is advanced by 4.

Examples
use bytes::BufMut;

let mut buf = vec![];
buf.put_i32(0x0809A0A1);
assert_eq!(buf, b"\x08\x09\xA0\xA1");
Panics

This function panics if there is not enough remaining capacity in self.

source

fn put_i32_le(&mut self, n: i32)

Writes a signed 32 bit integer to self in little-endian byte order.

The current position is advanced by 4.

Examples
use bytes::BufMut;

let mut buf = vec![];
buf.put_i32_le(0x0809A0A1);
assert_eq!(buf, b"\xA1\xA0\x09\x08");
Panics

This function panics if there is not enough remaining capacity in self.

source

fn put_i32_ne(&mut self, n: i32)

Writes a signed 32 bit integer to self in native-endian byte order.

The current position is advanced by 4.

Examples
use bytes::BufMut;

let mut buf = vec![];
buf.put_i32_ne(0x0809A0A1);
if cfg!(target_endian = "big") {
    assert_eq!(buf, b"\x08\x09\xA0\xA1");
} else {
    assert_eq!(buf, b"\xA1\xA0\x09\x08");
}
Panics

This function panics if there is not enough remaining capacity in self.

source

fn put_u64(&mut self, n: u64)

Writes an unsigned 64 bit integer to self in the big-endian byte order.

The current position is advanced by 8.

Examples
use bytes::BufMut;

let mut buf = vec![];
buf.put_u64(0x0102030405060708);
assert_eq!(buf, b"\x01\x02\x03\x04\x05\x06\x07\x08");
Panics

This function panics if there is not enough remaining capacity in self.

source

fn put_u64_le(&mut self, n: u64)

Writes an unsigned 64 bit integer to self in little-endian byte order.

The current position is advanced by 8.

Examples
use bytes::BufMut;

let mut buf = vec![];
buf.put_u64_le(0x0102030405060708);
assert_eq!(buf, b"\x08\x07\x06\x05\x04\x03\x02\x01");
Panics

This function panics if there is not enough remaining capacity in self.

source

fn put_u64_ne(&mut self, n: u64)

Writes an unsigned 64 bit integer to self in native-endian byte order.

The current position is advanced by 8.

Examples
use bytes::BufMut;

let mut buf = vec![];
buf.put_u64_ne(0x0102030405060708);
if cfg!(target_endian = "big") {
    assert_eq!(buf, b"\x01\x02\x03\x04\x05\x06\x07\x08");
} else {
    assert_eq!(buf, b"\x08\x07\x06\x05\x04\x03\x02\x01");
}
Panics

This function panics if there is not enough remaining capacity in self.

source

fn put_i64(&mut self, n: i64)

Writes a signed 64 bit integer to self in the big-endian byte order.

The current position is advanced by 8.

Examples
use bytes::BufMut;

let mut buf = vec![];
buf.put_i64(0x0102030405060708);
assert_eq!(buf, b"\x01\x02\x03\x04\x05\x06\x07\x08");
Panics

This function panics if there is not enough remaining capacity in self.

source

fn put_i64_le(&mut self, n: i64)

Writes a signed 64 bit integer to self in little-endian byte order.

The current position is advanced by 8.

Examples
use bytes::BufMut;

let mut buf = vec![];
buf.put_i64_le(0x0102030405060708);
assert_eq!(buf, b"\x08\x07\x06\x05\x04\x03\x02\x01");
Panics

This function panics if there is not enough remaining capacity in self.

source

fn put_i64_ne(&mut self, n: i64)

Writes a signed 64 bit integer to self in native-endian byte order.

The current position is advanced by 8.

Examples
use bytes::BufMut;

let mut buf = vec![];
buf.put_i64_ne(0x0102030405060708);
if cfg!(target_endian = "big") {
    assert_eq!(buf, b"\x01\x02\x03\x04\x05\x06\x07\x08");
} else {
    assert_eq!(buf, b"\x08\x07\x06\x05\x04\x03\x02\x01");
}
Panics

This function panics if there is not enough remaining capacity in self.

source

fn put_u128(&mut self, n: u128)

Writes an unsigned 128 bit integer to self in the big-endian byte order.

The current position is advanced by 16.

Examples
use bytes::BufMut;

let mut buf = vec![];
buf.put_u128(0x01020304050607080910111213141516);
assert_eq!(buf, b"\x01\x02\x03\x04\x05\x06\x07\x08\x09\x10\x11\x12\x13\x14\x15\x16");
Panics

This function panics if there is not enough remaining capacity in self.

source

fn put_u128_le(&mut self, n: u128)

Writes an unsigned 128 bit integer to self in little-endian byte order.

The current position is advanced by 16.

Examples
use bytes::BufMut;

let mut buf = vec![];
buf.put_u128_le(0x01020304050607080910111213141516);
assert_eq!(buf, b"\x16\x15\x14\x13\x12\x11\x10\x09\x08\x07\x06\x05\x04\x03\x02\x01");
Panics

This function panics if there is not enough remaining capacity in self.

source

fn put_u128_ne(&mut self, n: u128)

Writes an unsigned 128 bit integer to self in native-endian byte order.

The current position is advanced by 16.

Examples
use bytes::BufMut;

let mut buf = vec![];
buf.put_u128_ne(0x01020304050607080910111213141516);
if cfg!(target_endian = "big") {
    assert_eq!(buf, b"\x01\x02\x03\x04\x05\x06\x07\x08\x09\x10\x11\x12\x13\x14\x15\x16");
} else {
    assert_eq!(buf, b"\x16\x15\x14\x13\x12\x11\x10\x09\x08\x07\x06\x05\x04\x03\x02\x01");
}
Panics

This function panics if there is not enough remaining capacity in self.

source

fn put_i128(&mut self, n: i128)

Writes a signed 128 bit integer to self in the big-endian byte order.

The current position is advanced by 16.

Examples
use bytes::BufMut;

let mut buf = vec![];
buf.put_i128(0x01020304050607080910111213141516);
assert_eq!(buf, b"\x01\x02\x03\x04\x05\x06\x07\x08\x09\x10\x11\x12\x13\x14\x15\x16");
Panics

This function panics if there is not enough remaining capacity in self.

source

fn put_i128_le(&mut self, n: i128)

Writes a signed 128 bit integer to self in little-endian byte order.

The current position is advanced by 16.

Examples
use bytes::BufMut;

let mut buf = vec![];
buf.put_i128_le(0x01020304050607080910111213141516);
assert_eq!(buf, b"\x16\x15\x14\x13\x12\x11\x10\x09\x08\x07\x06\x05\x04\x03\x02\x01");
Panics

This function panics if there is not enough remaining capacity in self.

source

fn put_i128_ne(&mut self, n: i128)

Writes a signed 128 bit integer to self in native-endian byte order.

The current position is advanced by 16.

Examples
use bytes::BufMut;

let mut buf = vec![];
buf.put_i128_ne(0x01020304050607080910111213141516);
if cfg!(target_endian = "big") {
    assert_eq!(buf, b"\x01\x02\x03\x04\x05\x06\x07\x08\x09\x10\x11\x12\x13\x14\x15\x16");
} else {
    assert_eq!(buf, b"\x16\x15\x14\x13\x12\x11\x10\x09\x08\x07\x06\x05\x04\x03\x02\x01");
}
Panics

This function panics if there is not enough remaining capacity in self.

source

fn put_uint(&mut self, n: u64, nbytes: usize)

Writes an unsigned n-byte integer to self in big-endian byte order.

The current position is advanced by nbytes.

Examples
use bytes::BufMut;

let mut buf = vec![];
buf.put_uint(0x010203, 3);
assert_eq!(buf, b"\x01\x02\x03");
Panics

This function panics if there is not enough remaining capacity in self or if nbytes is greater than 8.

source

fn put_uint_le(&mut self, n: u64, nbytes: usize)

Writes an unsigned n-byte integer to self in the little-endian byte order.

The current position is advanced by nbytes.

Examples
use bytes::BufMut;

let mut buf = vec![];
buf.put_uint_le(0x010203, 3);
assert_eq!(buf, b"\x03\x02\x01");
Panics

This function panics if there is not enough remaining capacity in self or if nbytes is greater than 8.

source

fn put_uint_ne(&mut self, n: u64, nbytes: usize)

Writes an unsigned n-byte integer to self in the native-endian byte order.

The current position is advanced by nbytes.

Examples
use bytes::BufMut;

let mut buf = vec![];
buf.put_uint_ne(0x010203, 3);
if cfg!(target_endian = "big") {
    assert_eq!(buf, b"\x01\x02\x03");
} else {
    assert_eq!(buf, b"\x03\x02\x01");
}
Panics

This function panics if there is not enough remaining capacity in self or if nbytes is greater than 8.

source

fn put_int(&mut self, n: i64, nbytes: usize)

Writes low nbytes of a signed integer to self in big-endian byte order.

The current position is advanced by nbytes.

Examples
use bytes::BufMut;

let mut buf = vec![];
buf.put_int(0x0504010203, 3);
assert_eq!(buf, b"\x01\x02\x03");
Panics

This function panics if there is not enough remaining capacity in self or if nbytes is greater than 8.

source

fn put_int_le(&mut self, n: i64, nbytes: usize)

Writes low nbytes of a signed integer to self in little-endian byte order.

The current position is advanced by nbytes.

Examples
use bytes::BufMut;

let mut buf = vec![];
buf.put_int_le(0x0504010203, 3);
assert_eq!(buf, b"\x03\x02\x01");
Panics

This function panics if there is not enough remaining capacity in self or if nbytes is greater than 8.

source

fn put_int_ne(&mut self, n: i64, nbytes: usize)

Writes low nbytes of a signed integer to self in native-endian byte order.

The current position is advanced by nbytes.

Examples
use bytes::BufMut;

let mut buf = vec![];
buf.put_int_ne(0x010203, 3);
if cfg!(target_endian = "big") {
    assert_eq!(buf, b"\x01\x02\x03");
} else {
    assert_eq!(buf, b"\x03\x02\x01");
}
Panics

This function panics if there is not enough remaining capacity in self or if nbytes is greater than 8.

source

fn put_f32(&mut self, n: f32)

Writes an IEEE754 single-precision (4 bytes) floating point number to self in big-endian byte order.

The current position is advanced by 4.

Examples
use bytes::BufMut;

let mut buf = vec![];
buf.put_f32(1.2f32);
assert_eq!(buf, b"\x3F\x99\x99\x9A");
Panics

This function panics if there is not enough remaining capacity in self.

source

fn put_f32_le(&mut self, n: f32)

Writes an IEEE754 single-precision (4 bytes) floating point number to self in little-endian byte order.

The current position is advanced by 4.

Examples
use bytes::BufMut;

let mut buf = vec![];
buf.put_f32_le(1.2f32);
assert_eq!(buf, b"\x9A\x99\x99\x3F");
Panics

This function panics if there is not enough remaining capacity in self.

source

fn put_f32_ne(&mut self, n: f32)

Writes an IEEE754 single-precision (4 bytes) floating point number to self in native-endian byte order.

The current position is advanced by 4.

Examples
use bytes::BufMut;

let mut buf = vec![];
buf.put_f32_ne(1.2f32);
if cfg!(target_endian = "big") {
    assert_eq!(buf, b"\x3F\x99\x99\x9A");
} else {
    assert_eq!(buf, b"\x9A\x99\x99\x3F");
}
Panics

This function panics if there is not enough remaining capacity in self.

source

fn put_f64(&mut self, n: f64)

Writes an IEEE754 double-precision (8 bytes) floating point number to self in big-endian byte order.

The current position is advanced by 8.

Examples
use bytes::BufMut;

let mut buf = vec![];
buf.put_f64(1.2f64);
assert_eq!(buf, b"\x3F\xF3\x33\x33\x33\x33\x33\x33");
Panics

This function panics if there is not enough remaining capacity in self.

source

fn put_f64_le(&mut self, n: f64)

Writes an IEEE754 double-precision (8 bytes) floating point number to self in little-endian byte order.

The current position is advanced by 8.

Examples
use bytes::BufMut;

let mut buf = vec![];
buf.put_f64_le(1.2f64);
assert_eq!(buf, b"\x33\x33\x33\x33\x33\x33\xF3\x3F");
Panics

This function panics if there is not enough remaining capacity in self.

source

fn put_f64_ne(&mut self, n: f64)

Writes an IEEE754 double-precision (8 bytes) floating point number to self in native-endian byte order.

The current position is advanced by 8.

Examples
use bytes::BufMut;

let mut buf = vec![];
buf.put_f64_ne(1.2f64);
if cfg!(target_endian = "big") {
    assert_eq!(buf, b"\x3F\xF3\x33\x33\x33\x33\x33\x33");
} else {
    assert_eq!(buf, b"\x33\x33\x33\x33\x33\x33\xF3\x3F");
}
Panics

This function panics if there is not enough remaining capacity in self.

source

fn limit(self, limit: usize) -> Limit<Self>where Self: Sized,

Creates an adaptor which can write at most limit bytes to self.

Examples
use bytes::BufMut;

let arr = &mut [0u8; 128][..];
assert_eq!(arr.remaining_mut(), 128);

let dst = arr.limit(10);
assert_eq!(dst.remaining_mut(), 10);
source

fn writer(self) -> Writer<Self> where Self: Sized,

Creates an adaptor which implements the Write trait for self.

This function returns a new value which implements Write by adapting the Write trait functions to the BufMut trait functions. Given that BufMut operations are infallible, none of the Write functions will return with Err.

Examples
use bytes::BufMut;
use std::io::Write;

let mut buf = vec![].writer();

let num = buf.write(&b"hello world"[..]).unwrap();
assert_eq!(11, num);

let buf = buf.into_inner();

assert_eq!(*buf, b"hello world"[..]);
source

fn chain_mut<U: BufMut>(self, next: U) -> Chain<Self, U>where Self: Sized,

Creates an adapter which will chain this buffer with another.

The returned BufMut instance will first write to all bytes from self. Afterwards, it will write to next.

Examples
use bytes::BufMut;

let mut a = [0u8; 5];
let mut b = [0u8; 6];

let mut chain = (&mut a[..]).chain_mut(&mut b[..]);

chain.put_slice(b"hello world");

assert_eq!(&a[..], b"hello");
assert_eq!(&b[..], b" world");

Implementations on Foreign Types§

source§

impl<T: BufMut + ?Sized> BufMut for Box<T>

source§

fn remaining_mut(&self) -> usize

source§

fn chunk_mut(&mut self) -> &mut UninitSlice

source§

unsafe fn advance_mut(&mut self, cnt: usize)

source§

fn put_slice(&mut self, src: &[u8])

source§

fn put_u8(&mut self, n: u8)

source§

fn put_i8(&mut self, n: i8)

source§

fn put_u16(&mut self, n: u16)

source§

fn put_u16_le(&mut self, n: u16)

source§

fn put_u16_ne(&mut self, n: u16)

source§

fn put_i16(&mut self, n: i16)

source§

fn put_i16_le(&mut self, n: i16)

source§

fn put_i16_ne(&mut self, n: i16)

source§

fn put_u32(&mut self, n: u32)

source§

fn put_u32_le(&mut self, n: u32)

source§

fn put_u32_ne(&mut self, n: u32)

source§

fn put_i32(&mut self, n: i32)

source§

fn put_i32_le(&mut self, n: i32)

source§

fn put_i32_ne(&mut self, n: i32)

source§

fn put_u64(&mut self, n: u64)

source§

fn put_u64_le(&mut self, n: u64)

source§

fn put_u64_ne(&mut self, n: u64)

source§

fn put_i64(&mut self, n: i64)

source§

fn put_i64_le(&mut self, n: i64)

source§

fn put_i64_ne(&mut self, n: i64)

source§

impl<T: BufMut + ?Sized> BufMut for &mut T

source§

fn remaining_mut(&self) -> usize

source§

fn chunk_mut(&mut self) -> &mut UninitSlice

source§

unsafe fn advance_mut(&mut self, cnt: usize)

source§

fn put_slice(&mut self, src: &[u8])

source§

fn put_u8(&mut self, n: u8)

source§

fn put_i8(&mut self, n: i8)

source§

fn put_u16(&mut self, n: u16)

source§

fn put_u16_le(&mut self, n: u16)

source§

fn put_u16_ne(&mut self, n: u16)

source§

fn put_i16(&mut self, n: i16)

source§

fn put_i16_le(&mut self, n: i16)

source§

fn put_i16_ne(&mut self, n: i16)

source§

fn put_u32(&mut self, n: u32)

source§

fn put_u32_le(&mut self, n: u32)

source§

fn put_u32_ne(&mut self, n: u32)

source§

fn put_i32(&mut self, n: i32)

source§

fn put_i32_le(&mut self, n: i32)

source§

fn put_i32_ne(&mut self, n: i32)

source§

fn put_u64(&mut self, n: u64)

source§

fn put_u64_le(&mut self, n: u64)

source§

fn put_u64_ne(&mut self, n: u64)

source§

fn put_i64(&mut self, n: i64)

source§

fn put_i64_le(&mut self, n: i64)

source§

fn put_i64_ne(&mut self, n: i64)

source§

impl BufMut for &mut [u8]

source§

fn remaining_mut(&self) -> usize

source§

fn chunk_mut(&mut self) -> &mut UninitSlice

source§

unsafe fn advance_mut(&mut self, cnt: usize)

source§

fn put_slice(&mut self, src: &[u8])

source§

fn put_bytes(&mut self, val: u8, cnt: usize)

source§

impl BufMut for &mut [MaybeUninit<u8>]

source§

fn remaining_mut(&self) -> usize

source§

fn chunk_mut(&mut self) -> &mut UninitSlice

source§

unsafe fn advance_mut(&mut self, cnt: usize)

source§

fn put_slice(&mut self, src: &[u8])

source§

fn put_bytes(&mut self, val: u8, cnt: usize)

source§

impl BufMut for Vec<u8>

source§

fn remaining_mut(&self) -> usize

source§

unsafe fn advance_mut(&mut self, cnt: usize)

source§

fn chunk_mut(&mut self) -> &mut UninitSlice

source§

fn put<T: Buf>(&mut self, src: T)where Self: Sized,

source§

fn put_slice(&mut self, src: &[u8])

source§

fn put_bytes(&mut self, val: u8, cnt: usize)

Implementors§

source§

impl BufMut for BytesMut

source§

impl<T, U> BufMut for Chain<T, U>where T: BufMut, U: BufMut,

source§

impl<T: BufMut> BufMut for Limit<T>