Enum std::net::IpAddr

1.7.0 · source ·
pub enum IpAddr {
    V4(Ipv4Addr),
    V6(Ipv6Addr),
}
Expand description

An IP address, either IPv4 or IPv6.

This enum can contain either an Ipv4Addr or an Ipv6Addr, see their respective documentation for more details.

Examples

use std::net::{IpAddr, Ipv4Addr, Ipv6Addr};

let localhost_v4 = IpAddr::V4(Ipv4Addr::new(127, 0, 0, 1));
let localhost_v6 = IpAddr::V6(Ipv6Addr::new(0, 0, 0, 0, 0, 0, 0, 1));

assert_eq!("127.0.0.1".parse(), Ok(localhost_v4));
assert_eq!("::1".parse(), Ok(localhost_v6));

assert_eq!(localhost_v4.is_ipv6(), false);
assert_eq!(localhost_v4.is_ipv4(), true);
Run

Variants§

§

V4(Ipv4Addr)

An IPv4 address.

§

V6(Ipv6Addr)

An IPv6 address.

Implementations§

source§

impl IpAddr

1.12.0 (const: 1.50.0) · source

pub const fn is_unspecified(&self) -> bool

Returns true for the special ‘unspecified’ address.

See the documentation for Ipv4Addr::is_unspecified() and Ipv6Addr::is_unspecified() for more details.

Examples
use std::net::{IpAddr, Ipv4Addr, Ipv6Addr};

assert_eq!(IpAddr::V4(Ipv4Addr::new(0, 0, 0, 0)).is_unspecified(), true);
assert_eq!(IpAddr::V6(Ipv6Addr::new(0, 0, 0, 0, 0, 0, 0, 0)).is_unspecified(), true);
Run
1.12.0 (const: 1.50.0) · source

pub const fn is_loopback(&self) -> bool

Returns true if this is a loopback address.

See the documentation for Ipv4Addr::is_loopback() and Ipv6Addr::is_loopback() for more details.

Examples
use std::net::{IpAddr, Ipv4Addr, Ipv6Addr};

assert_eq!(IpAddr::V4(Ipv4Addr::new(127, 0, 0, 1)).is_loopback(), true);
assert_eq!(IpAddr::V6(Ipv6Addr::new(0, 0, 0, 0, 0, 0, 0, 0x1)).is_loopback(), true);
Run
const: unstable · source

pub fn is_global(&self) -> bool

🔬This is a nightly-only experimental API. (ip #27709)

Returns true if the address appears to be globally routable.

See the documentation for Ipv4Addr::is_global() and Ipv6Addr::is_global() for more details.

Examples
#![feature(ip)]

use std::net::{IpAddr, Ipv4Addr, Ipv6Addr};

assert_eq!(IpAddr::V4(Ipv4Addr::new(80, 9, 12, 3)).is_global(), true);
assert_eq!(IpAddr::V6(Ipv6Addr::new(0, 0, 0x1c9, 0, 0, 0xafc8, 0, 0x1)).is_global(), true);
Run
1.12.0 (const: 1.50.0) · source

pub const fn is_multicast(&self) -> bool

Returns true if this is a multicast address.

See the documentation for Ipv4Addr::is_multicast() and Ipv6Addr::is_multicast() for more details.

Examples
use std::net::{IpAddr, Ipv4Addr, Ipv6Addr};

assert_eq!(IpAddr::V4(Ipv4Addr::new(224, 254, 0, 0)).is_multicast(), true);
assert_eq!(IpAddr::V6(Ipv6Addr::new(0xff00, 0, 0, 0, 0, 0, 0, 0)).is_multicast(), true);
Run
const: unstable · source

pub fn is_documentation(&self) -> bool

🔬This is a nightly-only experimental API. (ip #27709)

Returns true if this address is in a range designated for documentation.

See the documentation for Ipv4Addr::is_documentation() and Ipv6Addr::is_documentation() for more details.

Examples
#![feature(ip)]

use std::net::{IpAddr, Ipv4Addr, Ipv6Addr};

assert_eq!(IpAddr::V4(Ipv4Addr::new(203, 0, 113, 6)).is_documentation(), true);
assert_eq!(
    IpAddr::V6(Ipv6Addr::new(0x2001, 0xdb8, 0, 0, 0, 0, 0, 0)).is_documentation(),
    true
);
Run
source

pub const fn is_benchmarking(&self) -> bool

🔬This is a nightly-only experimental API. (ip #27709)

Returns true if this address is in a range designated for benchmarking.

See the documentation for Ipv4Addr::is_benchmarking() and Ipv6Addr::is_benchmarking() for more details.

Examples
#![feature(ip)]

use std::net::{IpAddr, Ipv4Addr, Ipv6Addr};

assert_eq!(IpAddr::V4(Ipv4Addr::new(198, 19, 255, 255)).is_benchmarking(), true);
assert_eq!(IpAddr::V6(Ipv6Addr::new(0x2001, 0x2, 0, 0, 0, 0, 0, 0)).is_benchmarking(), true);
Run
1.16.0 (const: 1.50.0) · source

pub const fn is_ipv4(&self) -> bool

Returns true if this address is an IPv4 address, and false otherwise.

Examples
use std::net::{IpAddr, Ipv4Addr, Ipv6Addr};

assert_eq!(IpAddr::V4(Ipv4Addr::new(203, 0, 113, 6)).is_ipv4(), true);
assert_eq!(IpAddr::V6(Ipv6Addr::new(0x2001, 0xdb8, 0, 0, 0, 0, 0, 0)).is_ipv4(), false);
Run
1.16.0 (const: 1.50.0) · source

pub const fn is_ipv6(&self) -> bool

Returns true if this address is an IPv6 address, and false otherwise.

Examples
use std::net::{IpAddr, Ipv4Addr, Ipv6Addr};

assert_eq!(IpAddr::V4(Ipv4Addr::new(203, 0, 113, 6)).is_ipv6(), false);
assert_eq!(IpAddr::V6(Ipv6Addr::new(0x2001, 0xdb8, 0, 0, 0, 0, 0, 0)).is_ipv6(), true);
Run
const: unstable · source

pub fn to_canonical(&self) -> IpAddr

🔬This is a nightly-only experimental API. (ip #27709)

Converts this address to an IpAddr::V4 if it is an IPv4-mapped IPv6 addresses, otherwise it return self as-is.

Examples
#![feature(ip)]
use std::net::{IpAddr, Ipv4Addr, Ipv6Addr};

assert_eq!(IpAddr::V4(Ipv4Addr::new(127, 0, 0, 1)).to_canonical().is_loopback(), true);
assert_eq!(IpAddr::V6(Ipv6Addr::new(0, 0, 0, 0, 0, 0xffff, 0x7f00, 0x1)).is_loopback(), false);
assert_eq!(IpAddr::V6(Ipv6Addr::new(0, 0, 0, 0, 0, 0xffff, 0x7f00, 0x1)).to_canonical().is_loopback(), true);
Run
source§

impl IpAddr

source

pub fn parse_ascii(b: &[u8]) -> Result<IpAddr, AddrParseError>

🔬This is a nightly-only experimental API. (addr_parse_ascii #101035)

Parse an IP address from a slice of bytes.

#![feature(addr_parse_ascii)]

use std::net::{IpAddr, Ipv4Addr, Ipv6Addr};

let localhost_v4 = IpAddr::V4(Ipv4Addr::new(127, 0, 0, 1));
let localhost_v6 = IpAddr::V6(Ipv6Addr::new(0, 0, 0, 0, 0, 0, 0, 1));

assert_eq!(IpAddr::parse_ascii(b"127.0.0.1"), Ok(localhost_v4));
assert_eq!(IpAddr::parse_ascii(b"::1"), Ok(localhost_v6));
Run

Trait Implementations§

source§

impl Clone for IpAddr

source§

fn clone(&self) -> IpAddr

Returns a copy of the value. Read more
1.0.0 · source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
source§

impl Debug for IpAddr

source§

fn fmt(&self, fmt: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter. Read more
source§

impl Display for IpAddr

source§

fn fmt(&self, fmt: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter. Read more
1.17.0 · source§

impl From<[u16; 8]> for IpAddr

source§

fn from(segments: [u16; 8]) -> IpAddr

Creates an IpAddr::V6 from an eight element 16-bit array.

Examples
use std::net::{IpAddr, Ipv6Addr};

let addr = IpAddr::from([
    525u16, 524u16, 523u16, 522u16,
    521u16, 520u16, 519u16, 518u16,
]);
assert_eq!(
    IpAddr::V6(Ipv6Addr::new(
        0x20d, 0x20c,
        0x20b, 0x20a,
        0x209, 0x208,
        0x207, 0x206
    )),
    addr
);
Run
1.17.0 · source§

impl From<[u8; 16]> for IpAddr

source§

fn from(octets: [u8; 16]) -> IpAddr

Creates an IpAddr::V6 from a sixteen element byte array.

Examples
use std::net::{IpAddr, Ipv6Addr};

let addr = IpAddr::from([
    25u8, 24u8, 23u8, 22u8, 21u8, 20u8, 19u8, 18u8,
    17u8, 16u8, 15u8, 14u8, 13u8, 12u8, 11u8, 10u8,
]);
assert_eq!(
    IpAddr::V6(Ipv6Addr::new(
        0x1918, 0x1716,
        0x1514, 0x1312,
        0x1110, 0x0f0e,
        0x0d0c, 0x0b0a
    )),
    addr
);
Run
1.17.0 · source§

impl From<[u8; 4]> for IpAddr

source§

fn from(octets: [u8; 4]) -> IpAddr

Creates an IpAddr::V4 from a four element byte array.

Examples
use std::net::{IpAddr, Ipv4Addr};

let addr = IpAddr::from([13u8, 12u8, 11u8, 10u8]);
assert_eq!(IpAddr::V4(Ipv4Addr::new(13, 12, 11, 10)), addr);
Run
1.16.0 · source§

impl From<Ipv4Addr> for IpAddr

source§

fn from(ipv4: Ipv4Addr) -> IpAddr

Copies this address to a new IpAddr::V4.

Examples
use std::net::{IpAddr, Ipv4Addr};

let addr = Ipv4Addr::new(127, 0, 0, 1);

assert_eq!(
    IpAddr::V4(addr),
    IpAddr::from(addr)
)
Run
1.16.0 · source§

impl From<Ipv6Addr> for IpAddr

source§

fn from(ipv6: Ipv6Addr) -> IpAddr

Copies this address to a new IpAddr::V6.

Examples
use std::net::{IpAddr, Ipv6Addr};

let addr = Ipv6Addr::new(0, 0, 0, 0, 0, 0xffff, 0xc00a, 0x2ff);

assert_eq!(
    IpAddr::V6(addr),
    IpAddr::from(addr)
);
Run
source§

impl FromStr for IpAddr

§

type Err = AddrParseError

The associated error which can be returned from parsing.
source§

fn from_str(s: &str) -> Result<IpAddr, AddrParseError>

Parses a string s to return a value of this type. Read more
source§

impl Hash for IpAddr

source§

fn hash<__H>(&self, state: &mut __H)where __H: Hasher,

Feeds this value into the given Hasher. Read more
1.3.0 · source§

fn hash_slice<H>(data: &[Self], state: &mut H)where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher. Read more
source§

impl Ord for IpAddr

source§

fn cmp(&self, other: &IpAddr) -> Ordering

This method returns an Ordering between self and other. Read more
1.21.0 · source§

fn max(self, other: Self) -> Selfwhere Self: Sized,

Compares and returns the maximum of two values. Read more
1.21.0 · source§

fn min(self, other: Self) -> Selfwhere Self: Sized,

Compares and returns the minimum of two values. Read more
1.50.0 · source§

fn clamp(self, min: Self, max: Self) -> Selfwhere Self: Sized + PartialOrd<Self>,

Restrict a value to a certain interval. Read more
source§

impl PartialEq<IpAddr> for IpAddr

source§

fn eq(&self, other: &IpAddr) -> bool

This method tests for self and other values to be equal, and is used by ==.
1.0.0 · source§

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
1.16.0 · source§

impl PartialEq<IpAddr> for Ipv4Addr

source§

fn eq(&self, other: &IpAddr) -> bool

This method tests for self and other values to be equal, and is used by ==.
1.0.0 · source§

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
1.16.0 · source§

impl PartialEq<IpAddr> for Ipv6Addr

source§

fn eq(&self, other: &IpAddr) -> bool

This method tests for self and other values to be equal, and is used by ==.
1.0.0 · source§

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
1.16.0 · source§

impl PartialEq<Ipv4Addr> for IpAddr

source§

fn eq(&self, other: &Ipv4Addr) -> bool

This method tests for self and other values to be equal, and is used by ==.
1.0.0 · source§

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
1.16.0 · source§

impl PartialEq<Ipv6Addr> for IpAddr

source§

fn eq(&self, other: &Ipv6Addr) -> bool

This method tests for self and other values to be equal, and is used by ==.
1.0.0 · source§

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
source§

impl PartialOrd<IpAddr> for IpAddr

source§

fn partial_cmp(&self, other: &IpAddr) -> Option<Ordering>

This method returns an ordering between self and other values if one exists. Read more
1.0.0 · source§

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator. Read more
1.0.0 · source§

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more
1.0.0 · source§

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator. Read more
1.0.0 · source§

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more
1.16.0 · source§

impl PartialOrd<IpAddr> for Ipv4Addr

source§

fn partial_cmp(&self, other: &IpAddr) -> Option<Ordering>

This method returns an ordering between self and other values if one exists. Read more
1.0.0 · source§

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator. Read more
1.0.0 · source§

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more
1.0.0 · source§

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator. Read more
1.0.0 · source§

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more
1.16.0 · source§

impl PartialOrd<IpAddr> for Ipv6Addr

source§

fn partial_cmp(&self, other: &IpAddr) -> Option<Ordering>

This method returns an ordering between self and other values if one exists. Read more
1.0.0 · source§

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator. Read more
1.0.0 · source§

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more
1.0.0 · source§

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator. Read more
1.0.0 · source§

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more
1.16.0 · source§

impl PartialOrd<Ipv4Addr> for IpAddr

source§

fn partial_cmp(&self, other: &Ipv4Addr) -> Option<Ordering>

This method returns an ordering between self and other values if one exists. Read more
1.0.0 · source§

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator. Read more
1.0.0 · source§

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more
1.0.0 · source§

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator. Read more
1.0.0 · source§

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more
1.16.0 · source§

impl PartialOrd<Ipv6Addr> for IpAddr

source§

fn partial_cmp(&self, other: &Ipv6Addr) -> Option<Ordering>

This method returns an ordering between self and other values if one exists. Read more
1.0.0 · source§

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator. Read more
1.0.0 · source§

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more
1.0.0 · source§

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator. Read more
1.0.0 · source§

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more
source§

impl Copy for IpAddr

source§

impl Eq for IpAddr

source§

impl StructuralEq for IpAddr

source§

impl StructuralPartialEq for IpAddr

Auto Trait Implementations§

Blanket Implementations§

source§

impl<T> Any for Twhere T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
source§

impl<T> Borrow<T> for Twhere T: ?Sized,

source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for Twhere T: ?Sized,

source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
source§

impl<T> From<T> for T

source§

fn from(t: T) -> T

Returns the argument unchanged.

source§

impl<T, U> Into<U> for Twhere U: From<T>,

source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source§

impl<T> ToOwned for Twhere T: Clone,

§

type Owned = T

The resulting type after obtaining ownership.
source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
source§

impl<T> ToString for Twhere T: Display + ?Sized,

source§

default fn to_string(&self) -> String

Converts the given value to a String. Read more
source§

impl<T, U> TryFrom<U> for Twhere U: Into<T>,

§

type Error = Infallible

The type returned in the event of a conversion error.
source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T, U> TryInto<U> for Twhere U: TryFrom<T>,

§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.