Module chrono::format::strftime

strftime/strptime-inspired date and time formatting syntax.

Specifiers

The following specifiers are available both to formatting and parsing.

Spec.	Example	Description
		DATE SPECIFIERS:
%Y	2001	The full proleptic Gregorian year, zero-padded to 4 digits. chrono supports years from -262144 to 262143. Note: years before 1 BCE or after 9999 CE, require an initial sign (+/-).
%C	20	The proleptic Gregorian year divided by 100, zero-padded to 2 digits. 1
%y	01	The proleptic Gregorian year modulo 100, zero-padded to 2 digits. 1
%m	07	Month number (01–12), zero-padded to 2 digits.
%b	Jul	Abbreviated month name. Always 3 letters.
%B	July	Full month name. Also accepts corresponding abbreviation in parsing.
%h	Jul	Same as %b.
%d	08	Day number (01–31), zero-padded to 2 digits.
%e	8	Same as %d but space-padded. Same as %_d.
%a	Sun	Abbreviated weekday name. Always 3 letters.
%A	Sunday	Full weekday name. Also accepts corresponding abbreviation in parsing.
%w	0	Sunday = 0, Monday = 1, …, Saturday = 6.
%u	7	Monday = 1, Tuesday = 2, …, Sunday = 7. (ISO 8601)
%U	28	Week number starting with Sunday (00–53), zero-padded to 2 digits. 2
%W	27	Same as %U, but week 1 starts with the first Monday in that year instead.
%G	2001	Same as %Y but uses the year number in ISO 8601 week date. 3
%g	01	Same as %y but uses the year number in ISO 8601 week date. 3
%V	27	Same as %U but uses the week number in ISO 8601 week date (01–53). 3
%j	189	Day of the year (001–366), zero-padded to 3 digits.
%D	07/08/01	Month-day-year format. Same as %m/%d/%y.
%x	07/08/01	Locale’s date representation (e.g., 12/31/99).
%F	2001-07-08	Year-month-day format (ISO 8601). Same as %Y-%m-%d.
%v	8-Jul-2001	Day-month-year format. Same as %e-%b-%Y.
		TIME SPECIFIERS:
%H	00	Hour number (00–23), zero-padded to 2 digits.
%k	0	Same as %H but space-padded. Same as %_H.
%I	12	Hour number in 12-hour clocks (01–12), zero-padded to 2 digits.
%l	12	Same as %I but space-padded. Same as %_I.
%P	am	am or pm in 12-hour clocks.
%p	AM	AM or PM in 12-hour clocks.
%M	34	Minute number (00–59), zero-padded to 2 digits.
%S	60	Second number (00–60), zero-padded to 2 digits. 4
%f	26490000	Number of nanoseconds since last whole second. 5
%.f	.026490	Decimal fraction of a second. Consumes the leading dot. 5
%.3f	.026	Decimal fraction of a second with a fixed length of 3.
%.6f	.026490	Decimal fraction of a second with a fixed length of 6.
%.9f	.026490000	Decimal fraction of a second with a fixed length of 9.
%3f	026	Decimal fraction of a second like %.3f but without the leading dot.
%6f	026490	Decimal fraction of a second like %.6f but without the leading dot.
%9f	026490000	Decimal fraction of a second like %.9f but without the leading dot.
%R	00:34	Hour-minute format. Same as %H:%M.
%T	00:34:60	Hour-minute-second format. Same as %H:%M:%S.
%X	00:34:60	Locale’s time representation (e.g., 23:13:48).
%r	12:34:60 AM	Locale’s 12 hour clock time. (e.g., 11:11:04 PM). Falls back to %X if the locale does not have a 12 hour clock format.
		TIME ZONE SPECIFIERS:
%Z	ACST	Local time zone name. Skips all non-whitespace characters during parsing. Identical to %:z when formatting. 6
%z	+0930	Offset from the local time to UTC (with UTC being +0000).
%:z	+09:30	Same as %z but with a colon.
%::z	+09:30:00	Offset from the local time to UTC with seconds.
%:::z	+09	Offset from the local time to UTC without minutes.
%#z	+09	Parsing only: Same as %z but allows minutes to be missing or present.
		DATE & TIME SPECIFIERS:
%c	Sun Jul 8 00:34:60 2001	Locale’s date and time (e.g., Thu Mar 3 23:05:25 2005).
%+	2001-07-08T00:34:60.026490+09:30	ISO 8601 / RFC 3339 date & time format. 7
%s	994518299	UNIX timestamp, the number of seconds since 1970-01-01 00:00 UTC. 8
		SPECIAL SPECIFIERS:
%t		Literal tab (\t).
%n		Literal newline (\n).
%%		Literal percent sign.

It is possible to override the default padding behavior of numeric specifiers %?. This is not allowed for other specifiers and will result in the BAD_FORMAT error.

Modifier	Description
%-?	Suppresses any padding including spaces and zeroes. (e.g. %j = 012, %-j = 12)
%_?	Uses spaces as a padding. (e.g. %j = 012, %_j = 12)
%0?	Uses zeroes as a padding. (e.g. %e = 9, %0e = 09)

Notes:

---

1. %C, %y: This is floor division, so 100 BCE (year number -99) will print -1 and 99 respectively. For %y, values greater or equal to 70 are interpreted as being in the 20th century, values smaller than 70 in the 21st century. ↩

2. %U: Week 1 starts with the first Sunday in that year. It is possible to have week 0 for days before the first Sunday. ↩

3. %G, %g, %V: Week 1 is the first week with at least 4 days in that year. Week 0 does not exist, so this should be used with %G or %g. ↩

4. %S: It accounts for leap seconds, so 60 is possible. ↩

5. %f, %.f:
   %f and %.f are notably different formatting specifiers.
   %f counts the number of nanoseconds since the last whole second, while %.f is a fraction of a second.
   Example: 7μs is formatted as 7000 with %f, and formatted as .000007 with %.f. ↩

6. %Z: Since chrono is not aware of timezones beyond their offsets, this specifier only prints the offset when used for formatting. The timezone abbreviation will NOT be printed. See this issue for more information.
   
   Offset will not be populated from the parsed data, nor will it be validated. Timezone is completely ignored. Similar to the glibc strptime treatment of this format code.
   
   It is not possible to reliably convert from an abbreviation to an offset, for example CDT can mean either Central Daylight Time (North America) or China Daylight Time. ↩

7. %+: Same as %Y-%m-%dT%H:%M:%S%.f%:z, i.e. 0, 3, 6 or 9 fractional digits for seconds and colons in the time zone offset.
   
   This format also supports having a Z or UTC in place of %:z. They are equivalent to +00:00.
   
   Note that all T, Z, and UTC are parsed case-insensitively.
   
   The typical strftime implementations have different (and locale-dependent) formats for this specifier. While Chrono’s format for %+ is far more stable, it is best to avoid this specifier if you want to control the exact output. ↩

8. %s: This is not padded and can be negative. For the purpose of Chrono, it only accounts for non-leap seconds so it slightly differs from ISO C strftime behavior. ↩

Structs

• StrftimeItems
  Parsing iterator for strftime-like format strings.

Constants

• HAVE_ALTERNATES 🔒